|
|
PDF NFSW036LT Data sheet ( Hoja de datos )
| Número de pieza | NFSW036LT | |
| Descripción | TYPE WHITE LED | |
| Fabricantes | NICHIA CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NFSW036LT (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
No. STSE-CC5172B
<Cat.No.070427>
SPECIFICATIONS FOR NICHIA CHIP TYPE WHITE LED
MODEL : NFSW036LT
NICHIA CORPORATION
-0-
1 page  
www.DataSheet4U.com
7.CAUTIONS
Nichia STSE-CC5172B
<Cat.No.070427>
The LEDs are devices which are materialized by combining Blue LEDs and special phosphors.
Consequently, the color of the LEDs is changed a little by an operating current.
Care should be taken after due consideration when using LEDs.
(1) Moisture Proof Package
· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.
There is a possibility that this can cause exfoliation of the contacts and damage the optical
characteristics of the LEDs. For this reason, the moisture proof package is used to keep moisture
to a minimum in the package.
· The moisture proof package is made of an aluminum moisture proof bag. A package of
a moisture absorbent material (silica gel) is inserted into the aluminium moisture proof bag.
The silica gel changes its color from blue to pink as it absorbs moisture.
(2) Storage
· Storage Conditions
Before opening the package :
The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within
a year. When storing the LEDs, moisture proof packaging with absorbent material (silica gel)
is recommended.
After opening the package :
The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered
within 168 hours (7days) after opening the package. If unused LEDs remain, they should be
stored in the moisture proof packages, such as sealed containers with packages of moisture
absorbent material (silica gel). It is also recommended to return the LEDs to the original
moisture proof bag and to reseal the moisture proof bag again.
· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following condition.
Baking treatment : more than 24 hours at 65 ± 5°C
· Nichia LED electrodes are silver plated. The silver surface may be affected by environments which
contain corrosive substances. Please avoid conditions which may cause the LED to corrode,
tarnish or discolor. This corrosion or discoloration may cause difficulty during soldering operations.
It is recommended that the User use the LEDs as soon as possible.
· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where
condensation can occur.
(3) Static Electricity
· Static electricity or surge voltage damages the LEDs.
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.
· All devices, equipment and machinery must be properly grounded. It is recommended that precautions
be taken against surge voltage to the equipment that mounts the LEDs.
· When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not. It is easy to find
static-damaged LEDs by a light-on test or a VF test at a lower current (below 1mA is recommended).
· Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower,
or the LEDs do not light at the low current.
Criteria : (VF > 2.0V at IF=0.5mA)
-4-
5 Page 
Forward Current vs.
Chromaticity Coordinate
0.34
0.33
0.32
0.31
Ta=25°C
20mA
40mA
80mA
150mA
180mA
350mA
0.30
0.29 0.30 0.31 0.32 0.33
x
Ambient Temperature vs.
Chromaticity Coordinate
0.34
IFP=150mA
0.33
-40°C
0.32
0.31
0°C
25°C
50°C
100°C
0.30
0.29 0.30 0.31 0.32 0.33
x
Spectrum
1.2
1.0
Ta=25℃
IFP=150mA
0.8
0.6
0.4
0.2
0
350 450 550 650
Wavelength λ (nm)
Directivity
750
1.0
Ta=25°C
IFP=150mA
0.5
0
90° 60° 30°
Radiation Angle
0° 10° 20°
30°
40°
50°
60°
70°
80°
90°
0° 0.5 1.0
Model
NFSW036L
NICHIA CORPORATION Title CHARACTERISTICS
No. 070419547302
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet NFSW036LT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NFSW036LT | TYPE WHITE LED | NICHIA CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |