DataSheet.es    


PDF SA1117B Data sheet ( Hoja de datos )

Número de pieza SA1117B
Descripción 800mA LDO VOLTAGE REGULATOR
Fabricantes Silan Microelectronics 
Logotipo Silan Microelectronics Logotipo



Hay una vista previa y un enlace de descarga de SA1117B (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! SA1117B Hoja de datos, Descripción, Manual

SA1117B
800 mA LDO VOLTAGE REGULATOR
DESCRIPTION
The SA1117B is a positive low voltage dropout regulator; voltage
dropout is only 1.2V at 800mA.
SA1117B provides two versions: fixed and adjustable versions.
VOUT has a tolerance of less than 1.5% for fixed versions 1.5V,
1.8V, 2.5V, 3.3V, 5.0V and adjustable version or 2% output
accuracy for fixed version 1.2V.
The SA1117B offers some key features include thermal shutdown
and current limiting. It is suitable for all electronic products.
SOT-223-3L
FEATURES
* 1.5% output accuracy for fixed versions 1.5V, 1.8V, 2.5V,
3.3V, 5.0V and adjustable version
* 2% output accuracy for fixed version 1.2V
* Low Dropout Voltage: 1.2V at 800mA output current
* Current Limiting
* Thermal Shutdown
* Temperature Range: -40°C to 125°C
TO-252-2L
APPLICATIONS
* Laptop, Palmtop, and Notebook
Computers
* Battery Charger
* SCSI-II Active Terminator
* Cellular Phone
* Cordless Telephones
* Battery Powered Systems
* Portable Instrumentation
* SMPS Post-Regulator
www.DataShOeeRt4DUE.cRomING INFORMATION (Temperature range: -40°C ~125°C)
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http://www.silan.com.cn
REV:1.0 2008.08.12
Page 1 of 8

1 page




SA1117B pdf
SA1117B
FUNCTION DESCRIPTION
The SA1117B is a LDO regulator, it’s pass transistor is made up of a single NPN transistor being driven by a
PNP. The dropout voltage is defined as: VDROP = VBE+ VSAT.
The SA1117B series of fixed and adjustable regulators are easy to use. Output voltages are 1.2V, 1.5V, 1.8V,
2.5V, 3.3V, and 5.0V.On-chip thermal shut down provides protection against any combination of overload and
ambient temperature that would create excessive junction temperature.
The SA1117B requires an output capacitor for device stability. Its value of 22µF tantalum covers all cases of
bypassing the adjustment terminal. Without bypassing the adjustment terminal smaller capacitors can be used
with equally good results which depend upon the application circuit. In general, linear regulator stability
decreases with higher output currents.
TYPICAL APPLICATION CIRCUIT
Figure 1. Typical Fixed Output Voltage
www.DataSheet4U.com
Figure 2. Typical Adjustable Output Voltage
Note: The circuit and parameters are reference only, please set the parameters of the real application circuit based
on the real test.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http://www.silan.com.cn
REV:1.0 2008.08.12
Page 5 of 8

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet SA1117B.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SA11171A LDO VOLTAGE REGULATORSilan Microelectronics
Silan Microelectronics
SA1117B800mA LDO VOLTAGE REGULATORSilan Microelectronics
Silan Microelectronics
SA1117C1A LDO VOLTAGE REGULATORSilan Microelectronics
Silan Microelectronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar