DataSheet26.com

NLP110-9924J PDF даташит

Спецификация NLP110-9924J изготовлена ​​​​«Emerson» и имеет функцию, называемую «AC-DC / 86W - 135W Medical».

Детали детали

Номер произв NLP110-9924J
Описание AC-DC / 86W - 135W Medical
Производители Emerson
логотип Emerson логотип 

4 Pages
scroll

No Preview Available !

NLP110-9924J Даташит, Описание, Даташиты
Embedded Power for
Business-Critical Continuity
NLP110 Series
Single and
Triple Output
Total Power:
Input Voltage:
# of Outputs:
80-110 Watts
90-264 VAC
Single, Triple
Rev. 02.10.09_152
NLP110 Series
 of 4
Special Features
• Provides low voltage outputs
• Compliance to EN61000-3-2
(Power Factor = 0.98)
• 90 Vac to 264 Vac universal
input range
• UL, CSA and VDE safety
approvals and CE-Marked to
LVD
• Overvoltage and short circuit
protection
• VDE0871-B, EN55022-B,
EN55011-B conducted noise
• VDE0871-A, EN55022-A,
EN55011-A radiated noise
• Meets all applicable and
relevant immunity standards
EN61000-4-2,4,5 and 6
• RoHS compliant
• 2 year warranty
Safety
• VDE0805/EN60950/IEC950
File No. 10401-3336-1096
• UL1950 File No. E136005
• CSA C22.2 No. 950
File No. LR41062
• CCC Mark
Electrical Specifications
Input
Input ra­nge:
Frequency:
Input surge current:
(cold start)
Safety ground
leakage current:
Input current:
Input fuse:
Output
Total regulation:
(line and load)
Rise time:
Transient response:
Temperature coefficient:
Overvoltage protection:
Short circuit protection:
Minimum output current:
Universal input
(See Note 6)
120 Vac
230 Vac
120 Vac, 60 Hz
230 Vac, 50 Hz
120 Vac @ 80 W
120 Vac @ 110 W
230 Vac @ 80 W
230 Vac @ 110 W
UL/IEC127
Main output
Auxiliary outputs
At turn-on
Main output
75% to 100%
step at 0.1 A µs
Main outputs
Cyclic operation
Single and multiple
90-264 Vac
47-63 Hz
18 A max.
35 A max.
0.45 mA
0.75 mA
0.9 A rms
1.3 A rms
0.48 A rms
0.7 A rms
F3.15A H, 250 Vac
±2.0%
±5.0%
1.0 s, max.
5.0% or 250 mV
max. dev., 1 ms max.
recovery to 1%
±0.02%/°C
125%, ±10%
Continuous
See table
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.









No Preview Available !

NLP110-9924J Даташит, Описание, Даташиты
Embedded Power for
Business-Critical Continuity
EMC Characteristics
Conducted emissions:
Radiated emissions:
Harmonic current emission correction:
ESD air:
ESD contact:
Surge:
Fast transients:
Radiated immunity:
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-3-2
EN61000-4-2
EN61000-4-2
EN61000-4-5
EN61000-4-4
EN61000-4-3
Level B
Level A
Compliant
Level 3
Level 3
Level 3
Level 3
Level 3
Conducted immunity:
General Specifications
Hold-up time:
Efficiency:
Isolation voltage:
Approvals and standards pending:
Weight:
MTBF demonstrated:
EN61000-4-6
Level 3
120 Vac, 60 Hz
16.7 ms @ 110 W
120 Vac. 80 W (-9905J) 75% min.
Input/output
Input/chassis
3000 Vac
1500 Vac
EN60950, VDE0805, IEC950, UL1950, CSA C22.2 No. 950
283 g (10 oz)
MIL-HDBK-217F
220,000 hours min.
Environmental Specifications
Thermal performance:
Relative humidity:
Altitude:
Vibration (See Note 5):
Shock
Operating, ambient
(see derating curve)
Non-operating
0° C to +50 °C
-40 °C to +85 °C
50 °C to 70 °C ambient convection cooled Derate to 50% load
0 °C to +50 °C, ambient convection cooled 80 W
0 °C to +50 °C, ambient, 150 LFM forced air 110 W
Peak (0 °C to +50 °C, 60 s)
(See Note 3)
Non-condensing
5% to 95% RH
Operating
10,000 feet max.
Non-operating
30,000 feet max.
5-500 Hz
2.4 G rms peak
per MIL-STD-810E
516.4 Part IV
DERATING CURVE
Output Power (Watts)
110W
80W
150 LFM FORCED
AIR COOLING
NATURAL
CONVECTION
COOLING
55W
40W
0C 10C 20C 30C 40C 50C 60C 70C
Rev. 02.10.09_152
NLP110 Series
 of 4









No Preview Available !

NLP110-9924J Даташит, Описание, Даташиты
Embedded Power for
Business-Critical Continuity
Ordering Information
Output
Voltage
+5 V
+12 V
+48 V
+24 V
+5 V (A)
+3.3 V (B)
+12 V
+3.3 V (A)
+2.5 V (B)
+12 V
+12 V (A)
+3.3 V (B)
-12 V
+12 V (A)
+5 V (B)
-12 V
Min (6)
0.5 A
0.3 A
0A
0.2 A
0.5 A
0.2 A
0A
0.5 A
0.1 A
0A
0.2 A
0.5 A
0A
0.2 A
0.2 A
0A
Max (1)
15 A
6.4 A
1.6 A
3.2 A
13 A
13 A
0.65 A
13 A
13 A
0.65 A
6.5 A
13 A
0.65 A
6.5 A
13 A
0.65 A
150 LFM (2)
22 A
9.2 A
2.3 A
4.6 A
16 A
16 A
1A
16 A
16 A
1A
8.5 A
16 A
1A
8.5 A
16 A
1A
300 LFM (3)
22 A
9.2 A
2.3 A
4.6 A
18 A
20 A
1A
20 A
20 A
1A
8.5 A
20 A
1A
8.5 A
18 A
1A
Peak (4)
22 A
11.5 A
2.5 A
6.0 A
18 A
20 A
1A
22 A
22 A
1A
10 A
22 A
1A
10 A
22 A
1A
Ripple (5)
50 mV
120 mV
240 mV
240 mV
50 mV
50 mV
120 mV
50 mV
50 mV
120 mV
120 mV
50 mV
120 mV
120 mV
50 mV
120 mV
Total
Regulation
± 2.0%
± 2.0%
± 2.0%
± 2.0%
± 2.0%
± 2.0%
± 5.0%
± 2.0%
± 2.0%
± 5.0%
± 2.0%
± 2.0%
± 5.0%
± 2.0%
± 2.0%
± 5.0%
Model Numbers (7, 14, 15)
NLP110-9605J
NLP110-9612J
NLP110-9617J
NLP110-9624J
NLP110-9693J
NLP110-9694J
NLP110-9695J
NLP110-9608J
Rev. 02.10.09_152
NLP110 Series
 of 4
Notes
1 Free air convection.
Multiple output units: maximum continuous output power not to exceed
80 W.
FFFFSooooinrrrrg----l9999e6666o9990u3458tJJJJp;;;; uIIII3335t....3330uVVVVn====its1111:3333mAAAAammmmximaaaaxxxxu....;;;;mIIII5211..22c05oVVVVn====t66i11n..3355uoAAAAummmms oaaaaxxuxx....t;;;;pIIII33u35....t3330VVpVVo++++wIIII5211e..2205rVVVVn²²²²o1111t6666toAAAA..e. xceed; 75 W
on -9905J; 76.8 W on -9912J,-9924J, and -9917J.
2 150 LFM forced air cooling from L4 side.
Multiple output units: maximum continuous output power not to exceed 105
W.
FFFFSooooinrrrrg----l9999e6666o9990u3458tJJJJp;;;; uIIII3335t....3330uVVVVn====its1111:6666mAAAAammmmximaaaaxxxxu....;;;;mIIII5211..22c05oVVVVn====t88i11n..6655uoAAAAummmms oaaaaxxuxx....t;;;;pIIII33u35....t3330VVpVVo++++wIIII5211e..2205rVVVVn²²²²o2222t0000toAAAA..e. xceed 110 W
for all models.
3 300 LFM forced air cooling from L4 side.
Multiple output units: maximum continuous output power not to exceed 110
W.
FFFFSooooinrrrrg----l9999e6666o9990u3458tJJJJp;;;; uIIII3335t....3330uVVVVn====its2222:0000mAAAAammmmximaaaaxxxxu....;;;;mIIII5211..22c05oVVVVn====t88i12n..8055uoAAAAummmms oaaaaxxuxx....t;;;;pIIII33u35....t3330VVpVVo++++wIIII5211e..2205rVVVVn²²²²o2222t2222toAAAA..e. xceed 110 W
for all models.
4 Peak output current lasting less than 30 seconds with duty cycle less than
5%. During peak loading, output voltage may exceed total regulation limits.
5 Figure is peak-to-peak for convection power rating. Output noise
measurements are made across a 20 MHz bandwidth using a 6’ twisted pair,
terminated with a 10 µF electrolytic capacitor and a 0.1 µF ceramic capacitor.
6 Minimum load required for correct start-up and operation on single outputs
and on main output of multiple versions. Failure to observe minimum
load on main output will not allow the supply to start-up correctly. Some
electronic test loads have a large delay time before they start drawing
current even though the voltage from the supply is present. During this time
delay, there is no load on the output and as a result, the supply cannot start-
up properly and maintain its correct output voltage. In these instances, a
dummy resistive load across the output may be necessary to load the output
of the supply until the test load can function correctly and draw the intended
minimum load. Minimum load required on auxiliary outputs to maintain
regulation.
7 For models NLP110-9608J and NLP110-9695J, the 12 V output is floating.
For -12 V output, pin 11 on J2 has to be connected to Return making pin 12
the -12 V output
8 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms
5 Hz to 500 Hz.
9 For optimum reliability, no part of the heatsink should exceed 110 ˚C, and no
semiconductor case temperature should exceed 120 ˚C.
10 CAUTION: Allow a minimum of 1 second after disconnecting line power
when making thermal measurements.
11 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
12 The EMI specifications reference measurements made with the power supply
mounted on a grounded metal sheet extending 1 inch beyond each edge,
using an unshielded cable. No external filtering required during conducted
emissions testing but some applications may require additional filtering
to achieve system compliance. A line choke, (ac input cords looped twice
through an EMI suppression toroid) was used during radiated emissions
testing. Considerable radiated testing in 1U six-sided boxes has shown that
units can meet level B in typical systems. Application support is available
from the factory to assist with EMI compliance.
13 All models require a minimum mounting stand-off of 6.35 mm (0.25 inches)
in the end use product.
14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
15 NOTICE: Some models do not support all options. Please contact your local
Emerson Network Power representative or use the on-line model number
search tool at http://www.PowerConversion.com/products.










Скачать PDF:

[ NLP110-9924J.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NLP110-9924JAC-DC / 86W - 135W MedicalEmerson
Emerson

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск