|
|
PDF HMC773LC3B Data sheet ( Hoja de datos )
| Número de pieza | HMC773LC3B | |
| Descripción | GaAs MMIC FUNDAMENTAL MIXER | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC773LC3B (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v03.0809
Typical Applications
The HMC773LC3B is ideal for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios & VSAT
• Test Equipment & Sensors
9 • Military End-Use
Functional Diagram
www.DataSheet4U.com
HMC773LC3B
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
Features
Passive: No DC Bias Required
Input IP3: +22 dBm
LO/RF Isolation: 38 dB
Wide IF Bandwidth: DC - 8 GHz
12 Lead Ceramic 3x3 mm SMT Package: 9mm2
General Description
The HMC773LC3B is a general purpose double
balanced mixer in a leadless RoHS compliant SMT
package that can be used as an upconverter or
downconverter between 6 and 26 GHz. This mixer
requires no external components or matching circuitry.
The HMC773LC3B provides excellent LO to RF and LO
to IF suppression due to optimized balun structures.
The mixer operates with LO drive levels above +13
dBm. The HMC773LC3B eliminates the need for wire
bonding, allowing use of surface mount manufacturing
techniques.
Electrical Specifications, TA = +25° C, IF = 0.5 GHz, LO = +13 dBm*
Parameter
Min. Typ. Max. Min. Typ.
Frequency Range, RF & LO
Frequency Range, IF
Conversion Loss
LO to RF Isolation
6 - 16
DC - 8
9
37
12
16 - 26
DC - 8
9
39
LO to IF Isolation
31 37
21 32
RF to IF Isolation
5 11
IP3 (Input)
17
IP2 (Input)
45
1 dB Gain Compression (Input)
10
* Unless otherwise noted, all measurements performed as downconverter, IF = 0.5 GHz
10
20
22
50
11
Max.
11
Units
GHz
GHz
dB
dB
dB
dB
dBm
dBm
dBm
9 - 386
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v03.0809
HMC773LC3B
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
9
Pin Descriptions
Pin Number
Function
1, 3, 7, 9, 10, 12
GND
Description
These pins and package bottom must also be
connected to RF/DC ground.
2
5
8
4, 6, 11
LO This pin is AC coupled and matched to 50 Ohms.
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
IF
capacitor whose value has been chosen to pass the neces-
sary IF frequency range. For operation to DC, this pin must not
source or sink more than 2 mA of current or part non-function
and possible part failure will result.
RF This pin is AC coupled and matched to 50 Ohms.
These pins are not connected internally; however, all data
N/C shown herein was measured with these pins connected to
RF/DC ground externally.
Interface Schematic
www.DataSheet4U.com
9 - 390
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC773LC3B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC773LC3B | GaAs MMIC FUNDAMENTAL MIXER | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |