|
|
PDF 74LVC1G386 Data sheet ( Hoja de datos )
| Número de pieza | 74LVC1G386 | |
| Descripción | 3-input EXCLUSIVE-OR gate | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74LVC1G386 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
74LVC1G386
3-input EXCLUSIVE-OR gate
Rev. 02 — 3 September 2007
www.DataSheet4U.com
Product data sheet
1. General description
The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function.
The input can be driven from either 3.3 or 5 V devices. This feature allows the use of
these devices in a mixed 3.3 and 5 V environment.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall
time.
This device is fully specified for partial power-down applications using IOFF. The IOFF
circuitry disables the output, preventing the damaging backflow current through the device
when it is powered down.
2. Features
s Wide supply voltage range from 1.65 to 5.5 V
s High noise immunity
s Complies with JEDEC standard:
x JESD8-7 (1.65 V to 1.95 V)
x JESD8-5 (2.3 V to 2.7 V)
x JESD8B/JESD36 (2.7 V to 3.6 V)
s ±24 mA output drive (VCC = 3.0 V)
s Latch-up performance exceeds 250 mA
s CMOS low power consumption
s Direct interface with TTL levels
s Inputs accept voltages up to 5 V
s ESD protection:
x HBM EIA/JESD22-A114E exceeds 2000 V
x MM EIA/JESD22-A115-A exceeds 200 V.
s SOT363 and SOT457 package
s Specified from −40 to +85 °C and −40 to +125 °C.
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
74LVC1G386GW −40 °C to +125 °C SC-88
74LVC1G386GV −40 °C to +125 °C SC-74A
Description
plastic surface-mounted package; 6 leads
plastic surface-mounted package (TSOP6); 6 leads
Version
SOT363
SOT457
1 page  
NXP Semiconductors
74LVC1G386www.DataSheet4U.com
3-input EXCLUSIVE-OR gate
Table 7. Static characteristics …continued
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Typ[1] Max
Unit
IOFF power-off leakage current
ICC supply current
∆ICC
additional supply current
CI input capacitance
Tamb = −40 °C to +125 °C
VIH HIGH-level input voltage
VCC = 0 V; VI or VO = 5.5 V
VI = 5.5 V or GND;
VCC = 1.65 V to 5.5 V; IO = 0 A
per pin; VCC = 2.3 V to 5.5 V;
VI = VCC − 0.6 V; IO = 0 A
VCC = 3.3 V; VI = GND to VCC
VCC = 1.65 V to 1.95 V
- ±0.1 ±10
- 0.1 10
- 5 500
- 4-
0.65 × VCC -
-
µA
µA
µA
pF
V
VCC = 2.3 V to 2.7 V
1.7 - -
V
VCC = 2.7 V to 3.6 V
VCC = 4.5 V to 5.5 V
VIL LOW-level input voltage VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
2.0
0.7 × VCC
-
-
-
-
-
-
-V
-V
0.35 × VCC V
0.7 V
VCC = 2.7 V to 3.6 V
VCC = 4.5 V to 5.5 V
-
- 0.8
V
- - 0.3 × VCC V
VOH HIGH-level output voltage VI = VIH or VIL
IO = −100 µA; VCC = 1.65 V to 5.5 V
VCC − 0.1 -
IO = −4 mA; VCC = 1.65 V
0.95 -
IO = −8 mA; VCC = 2.3 V
1.7 -
IO = −12 mA; VCC = 2.7 V
1.9 -
IO = −24 mA; VCC = 3.0 V
2.0 -
IO = −32 mA; VCC = 4.5 V
3.4 -
-
-
-
-
-
-
V
V
V
V
V
V
VOL LOW-level output voltage VI = VIH or VIL
IO = 100 µA; VCC = 1.65 V to 5.5 V
-
- 0.1
V
IO = 4 mA; VCC = 1.65 V
-
- 0.70
V
IO = 8 mA; VCC = 2.3 V
-
- 0.45
V
IO = 12 mA; VCC = 2.7 V
-
- 0.60
V
IO = 24 mA; VCC = 3.0 V
-
- 0.80
V
II
IOFF
ICC
∆ICC
input leakage current
power-off leakage current
supply current
additional supply current
IO = 32 mA; VCC = 4.5 V
VCC = 0 V to 5.5 V; VI = 5.5 V or GND
VCC = 0 V; VI or VO = 5.5 V
VI = 5.5 V or GND;
VCC = 1.65 V to 5.5 V; IO = 0 A
per pin; VCC = 2.3 V to 5.5 V;
VI = VCC − 0.6 V; IO = 0 A
-
-
-
-
-
- 0.80
- ±100
- ±200
- 200
- 5000
V
µA
µA
µA
µA
[1] All typical values are measured at VCC = 3.3 V and Tamb = 25 °C.
74LVC1G386_2
Product data sheet
Rev. 02 — 3 September 2007
© NXP B.V. 2007. All rights reserved.
5 of 12
5 Page 
NXP Semiconductors
74LVC1G386www.DataSheet4U.com
3-input EXCLUSIVE-OR gate
16. Legal information
16.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
16.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
74LVC1G386_2
Product data sheet
Rev. 02 — 3 September 2007
© NXP B.V. 2007. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet 74LVC1G386.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74LVC1G38 | 2-input NAND gate open drain | NXP Semiconductors |
| 74LVC1G384 | Bilateral switch | NXP Semiconductors |
| 74LVC1G384GV | Bilateral switch | NXP Semiconductors |
| 74LVC1G384GW | Bilateral switch | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |