|
|
PDF HMC513LP5 Data sheet ( Hoja de datos )
| Número de pieza | HMC513LP5 | |
| Descripción | MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4 & 10.43 - 11.46 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC513LP5 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
HMC513LP5 / 513LP5E
www.DataSh
v00.0405
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.43 - 11.46 GHz
Typical Applications
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
• VSAT Radio
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• Military End-Use
Features
Dual Output: Fo = 10.43 - 11.46 GHz
Fo/2 = 5.21 - 5.73 GHz
Pout: +7 dBm
Phase Noise: -110 dBc/Hz @100 KHz Typ.
No External Resonator Needed
QFN Leadless SMT Package, 25 mm2
9 Functional Diagram
General Description
The HMC513LP5 & HMC513LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC
VCOs. The HMC513LP5 & HMC513LP5E integrate
resonators, negative resistance devices, varactor
diodes and feature half frequency and divide-by-
4 outputs. The VCO’s phase noise performance is
excellent over temperature, shock, and process due to
the oscillator’s monolithic structure. Power output is +7
dBm typical from a +3V supply voltage. The prescaler
function can be disabled to conserve current if not
required. The voltage controlled oscillator is packaged
in a leadless QFN 5x5 mm surface mount package,
and requires no external matching components.
9 - 108
Electrical Specifications, TA = +25° C, Vcc1, Vcc2 = +3V
Frequency Range
Parameter
Power Output
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT
Tune Voltage
Supply Current
Tune Port Leakage Current (Vtune= 13V)
Output Return Loss
Harmonics/Subharmonics
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
Fo
Fo/2
RFOUT
RFOUT/2
RFOUT/4
Vtune
Icc1 & Icc2
1/2
3/2
2nd
3rd
Min.
+5
+5
-10
2
240
Typ.
10.43 - 11.46
5.215 - 5.73
-110
275
2
32
26
15
28
5
25
1
Max.
+10
+11
-4
13
290
10
Units
GHz
GHz
dBm
dBm
dBm
dBc/Hz
V
mA
μA
dB
dBc
dBc
dBc
dBc
MHz pp
MHz/V
MHz/°C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
HMC513LP5 / 513LP5E
www.DataSheet4U.com
v00.0405
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.43 - 11.46 GHz
9
Pin Descriptions
Pin Number
1-3, 5, 7-11,
13-18, 20,
22-28, 30-32
Function
N/C
Description
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
4 RFOUT/4
Divide-by-4 Output
Supply Voltage for prescaler. If prescaler is not
6
VCC1
required, this pin may be left open to conserve
40 mA of current.
Interface Schematic
12 RFOUT/2
Half frequency output (AC coupled).
19 RFOUT
RF output (AC coupled).
21 VCC2
Supply Voltage, +3V
29
VTUNE
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
GND
Package bottom has an exposed metal paddle
that must be connected to RF/DC ground.
9 - 112
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC513LP5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC513LP5 | MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4 & 10.43 - 11.46 GHz | Hittite Microwave Corporation |
| HMC513LP5E | MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4 & 10.43 - 11.46 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |