|
|
PDF HMC517LC4 Data sheet ( Hoja de datos )
| Número de pieza | HMC517LC4 | |
| Descripción | SMT PHEMT MMIC LOW NOISE AMPLIFIER 17 - 26 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC517LC4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.1204
HMC517LC4
www.DataSheet4U.com
SMT PHEMT LOW NOISE
AMPLIFIER, 17 - 26 GHz
5
Typical Applications
Features
The HMC517LC4 is ideal for use as a LNA or driver
amplifier for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios & VSAT
• Test Equipment and Sensors
• Military
Noise Figure: 2.5 dB
Gain: 19 dB
OIP3: +23 dBm
Single Supply: +3V @ 67 mA
50 Ohm Matched Input/Output
RoHS Compliant 4 x 4 mm Package
Functional Diagram
General Description
The HMC517LC4 chip is a high dynamic range GaAs
PHEMT MMIC Low Noise Amplifier (LNA) housed in a
leadless “Pb free” RoHS compliant SMT package. The
HMC517LC4 provides 19 dB of small signal gain, 2.5
dB of noise figure and has an output IP3 of +23 dBm.
The P1dB output power of +13 dBm enables the LNA
to also function as a LO driver for balanced, I/Q or
image reject mixers. The HMC517LC4 allows the use
of surface mount manufacturing techniques.
Electrical Specifications, TA = +25° C, Vdd 1, 2, 3 = +3V
Parameter
Frequency Range
Gain
Gain Variation Over Temperature
Noise Figure
Input Return Loss
Output Return Loss
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Supply Current (Idd)(Vdd = +3V)
Min.
Typ. Max. Min.
Typ. Max. Units
17 - 22
22 - 26
GHz
16 19
15 18
dB
0.02
0.03
0.02
0.03 dB/ °C
2.5 3.1
2.6 3.3 dB
15 15 dB
11 17 dB
12 13 dBm
15 16 dBm
23 24 dBm
67 67 mA
5 - 530
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
5
v00.1204
HMC517LC4
www.DataSheet4U.com
SMT PHEMT LOW NOISE
AMPLIFIER, 17 - 26 GHz
Pin Descriptions
Pin Number
Function
1, 5-14, 18,
20, 22, 24
N/C
3 RFIN
23, 21, 19
Vdd1, 2, 3
16 RFOUT
2, 4, 15, 17
GND
Description
This pin may be connected to RF/DC ground.
Performance will not be affected.
This pin is AC coupled and matched to 50 Ohms from
17 - 26 GHz.
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 1,000 pF and 2.2 μF are required.
This pin is AC coupled and matched to 50 Ohms from
17 - 26 GHz.
These pins and package bottom must be
connected to RF/DC ground.
Interface Schematic
Application Circuit
Component
C1, C2, C3
C4, C5, C6
C7, C8, C9
Value
100 pF
1,000 pF
2.2 μF
5 - 534
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC517LC4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC517LC4 | SMT PHEMT MMIC LOW NOISE AMPLIFIER 17 - 26 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |