|
|
PDF HMC520 Data sheet ( Hoja de datos )
| Número de pieza | HMC520 | |
| Descripción | GaAs MMIC I/Q MIXER 6 - 10 GHz | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC520 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.1004
Typical Applications
The HMC520 is ideal for:
• Point-to-Point and Point-to-Multi-Point Radio
3 • C-Band VSAT
• Military Radar and ECM
Functional Diagram
HMC520
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 40 dB
LO to RF Isolation: 45 dB
High Input IP3: +22 dBm
General Description
The HMC520 is a compact I /Q MMIC mixer which can
be used as either an Image Reject Mixer or a Single
Sideband Upconverter. The chip utilizes two standard
Hittite double balanced mixer cells and a 90 degree
hybrid fabricated in a GaAs MESFET process. All
data shown below is taken with the chip mounted in
a 50 Ohm test fixture and includes the effects of 1 mil
diameter x 20 mil length bond wires on each port. A
low frequency quadrature hybrid was used to produce
a 100 MHz USB IF output. This product is a much
smaller alternative to hybrid style Image Reject Mixers
and Single Sideband Upconverter assemblies.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +15 dBm*
Parameter
Min.
Typ.
Frequency Range, RF/LO
6 - 10
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
7
Image Rejection
20 40
1 dB Compression (Input)
+12
LO to RF Isolation
35 45
LO to IF Isolation
16 22
IP3 (Input)
+22
Amplitude Balance
0.3
Phase Balance
4
* Unless otherwise noted, all measurements performed as downconverter.
Max.
10
Min. Typ.
7.1 - 8.5
DC - 3.5
7
30 40
+12
40 50
17 22
+23
0.1
3
Max.
9
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
3 - 120
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.1004
HMC520
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
3
Pad Descriptions
Pad Number
Function
1 RF
4 LO
2 (5)
IF2
3 (6)
IF1
GND
Description
This pad is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pad is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pad is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to
DC, this pad must not source/sink more than 3mA of current
or die non-function and possible die failure will result. Pads
5 and 6 are alternate IF ports.
The backside of the die must be
connected to RF/DC ground.
Interface Schematic
Assembly Diagrams
3 - 124
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC520.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC520 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
| HMC520A | MMIC I/Q Mixer |  Analog Devices |
| HMC520LC4 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
| HMC521 | GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |