|
|
Número de pieza | HMC526 | |
Descripción | GaAs MMIC I/Q MIXER 6 - 10 GHz | |
Fabricantes | Hittite Microwave | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC526 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v00.1204
Typical Applications
The HMC526 is ideal for:
• Point-to-Point and Point-to-Multi-Point Radio
3 • VSAT
• Military End Use
Functional Diagram
HMC526
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 40 dB
LO to RF Isolation: 50 dB
High Input IP3: +28 dBm
General Description
The HMC526 is a compact I /Q MMIC mixer which can
be used as either an Image Reject Mixer or a Single
Sideband Upconverter. The chip utilizes two standard
Hittite double balanced mixer cells and a 90 degree
hybrid fabricated in a GaAs MESFET process. All
data shown below is taken with the chip mounted in
a 50 Ohm test fixture and includes the effects of 1 mil
diameter x 20 mil length bond wires on each port. A
low frequency quadrature hybrid was used to produce
a 100 MHz USB IF output. This product is a much
smaller alternative to hybrid style Image Reject Mixers
and Single Sideband Upconverter assemblies.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +19 dBm*
Parameter
Min.
Typ.
Frequency Range, RF/LO
6 - 10
Frequency Range, IF
DC - 3.5
Conversion Loss (As IRM)
7.5
Image Rejection
18 30
1 dB Compression (Input)
+19
LO to RF Isolation
35 45
LO to IF Isolation
17 20
IP3 (Input)
+25
Amplitude Balance
0.5
Phase Balance
5
* Unless otherwise noted, all measurements performed as downconverter.
Max.
10
Min. Typ.
7 - 8.5
DC - 3.5
7.5
28 40
+20
40 50
17 22
+30
0.2
5
Max.
9.5
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
3 - 156
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page v00.1204
HMC526
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
6 - 10 GHz
3
Pad Descriptions
Pad Number
Function
1 RF
4 LO
2 (5)
IF2
3 (6)
IF1
GND
Description
. This pad is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pad is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pad is DC coupled. For applications not
requiring operation to DC, this port should be DC
blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pad
must not source/sink more than 3mA of current or
die non-function and possible die failure will result.
Pads 5 and 6 are alternate IF ports.
The backside of the die must be connected
to RF/DC ground.
Interface Schematic
Assembly Diagrams
3 - 160
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC526.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC520 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
HMC520A | MMIC I/Q Mixer | Analog Devices |
HMC520LC4 | GaAs MMIC I/Q MIXER 6 - 10 GHz | Hittite Microwave |
HMC521 | GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |