|
|
PDF HMC527LC4 Data sheet ( Hoja de datos )
| Número de pieza | HMC527LC4 | |
| Descripción | GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC527LC4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.0505
Typical Applications
The HMC527LC4 is ideal for:
• Point-to-Point Radios
7 • Point-to-Mulit-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
Functional Diagram
HMC527LC4
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
8.5 - 13.5 GHz
Features
Wide IF Bandwidth: DC - 2 GHz
Image Rejection: 35 dB
LO to RF Isolation: 45 dB
High Input IP3: +28 dBm
RoHS Compliant 4x4 mm SMT Package
General Description
The HMC527LC4 is a compact general purpose I/Q
MMIC mixer in a leadless RoHS compliant SMT pack-
age, which can be used as either an Image Reject
Mixer or a Single Sideband Upconverter. The mixer
utilizes two standard Hittite double balanced mixer
cells and a 90 degree hybrid fabricated in a GaAs
MESFET process. A low frequency quadrature hybrid
was used to produce a 100 MHz USB IF output. This
product is a much smaller alternative to hybrid style
Image Reject Mixers and Single Sideband Upcon-
verter assemblies. The HMC527LC4 eliminates the
need for wire bonding allowing use of surface mount
manufacturing techniques.
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +19 dBm*
Parameter
Min.
Typ.
Frequency Range, RF/LO
8.5 - 13.5
Frequency Range, IF
DC - 2
Conversion Loss (As IRM)
8
Image Rejection
17 25
1 dB Compression (Input)
+21
LO to RF Isolation
37 45
LO to IF Isolation
17 22
IP3 (Input)
+25
Amplitude Balance
0.6
Phase Balance
6
* Unless otherwise noted, all measurements performed as downconverter.
Max.
10
Min. Typ.
10.5 -12
DC - 2
7.5
27 34
+21
37 45
18 24
+28
0.4
6
Max.
9.5
Units
GHz
GHz
dB
dB
dBm
dB
dB
dBm
dB
Deg
7 - 394
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.0505
HMC527LC4
www.DataSheet4U.com
GaAs MMIC I/Q MIXER
8.5 - 13.5 GHz
7
Pin Descriptions
Pin Number
Function
1, 2, 6-8, 10,
13, 17-24
N/C
3, 5, 12, 14, 16
GND
4 RF
9 IF1
11 IF2
15 LO
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
These pins and package bottom must be connected
to RF/DC ground.
This pin is AC coupled and matched to
50 Ohms from 8.5 to 13.5 GHz.
This pin is DC coupled. For applications
not requiring operation to DC, this port should be
DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not
source/sink more than 3mA of current or part non-function
and possible part failure will result.
This pin is AC coupled and matched to
50 Ohms from 8.5 to 13.5 GHz.
Interface Schematic
7 - 398
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC527LC4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC527LC4 | GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |