|
|
PDF HMC533LP4 Data sheet ( Hoja de datos )
| Número de pieza | HMC533LP4 | |
| Descripción | MMIC VCO w/ DIVIDE-BY-16 / 23.8 - 24.8 GHz | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC533LP4 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
v00.0405
Typical Applications
Low noise MMIC VCO w/Divide-by-16 for:
• VSAT Radio
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• Military End-Use
• Automotive Radar
9
Functional Diagram
HMC533LP4 / 533LP4E
www.DataSheet4U.com
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Features
Pout: +12 dBm
Phase Noise: -95 dBc/Hz @100 KHz Typ.
No External Resonator Needed
Single Supply: +5V @ 220 mA
QFN Leadless SMT Package, 16 mm2
General Description
The HMC533LP4 & HMC533LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC
VCOs. The HMC533LP4 & HMC533LP4E integrate
resonators, negative resistance devices, varactor
diodes and feature a divide-by-16 output. The VCO’s
phase noise performance is excellent over temperature,
shock, and process due to the oscillator’s monolithic
structure. Power output is +12 dBm typical from a +5V
supply voltage. Prescaler function can be disabled to
conserve current if not required. The voltage controlled
oscillator is packaged in a leadless QFN 4 x 4 mm
surface mount package.
9 - 148
Electrical Specifications, TA = +25° C, Vcc1, Vcc2, Vcc3 = +5V
Frequency Range
Power Output
Parameter
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT
Tune Voltage
Supply Current
Tune Port Leakage Current (Vtune= 13V)
Output Return Loss
Harmonics/Subharmonics
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
Min.
RFOUT
RFOUT/16
+9
-7
Vtune
Icc
2
180
1/2
3/2
Typ.
23.8 - 24.8
+12
-4
-95
220
3
26
37
13
80
2.3
Max.
+15
-1
13
260
10
Units
GHz
dBm
dBm
dBc/Hz
V
mA
μA
dB
dBc
dBc
MHz pp
MHz/V
MHz/°C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.0405
HMC533LP4 / 533LP4E
www.DataSheet4U.com
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Pin Descriptions
Pin Number
Function
1, 15, 17,
21, 23
GND
Description
Package bottom has an exposed metal paddle that
must also be connected to RF/DC ground.
Interface Schematic
9
2 RFOUT/16
Divided-by-16 Output
Suppy voltage for prescaler.
3, 4 VCC2, VCC3 If prescaler is not required, these pins may be
left open to conserve 100 mA of current
5-14, 18,
19, 24
No Connection. These pins may be connected to RF/
N/C DC ground. Performance will not be affected.
16 RFOUT
RF output (AC coupled).
20 VCC1
Supply Voltage, +5V
22
VTUNE
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
9 - 152
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet HMC533LP4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC533LP4 | MMIC VCO w/ DIVIDE-BY-16 / 23.8 - 24.8 GHz | Hittite Microwave |
| HMC533LP4E | MMIC VCO w/ DIVIDE-BY-16 / 23.8 - 24.8 GHz | Hittite Microwave |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |