DataSheet26.com

HLMP-HM63 PDF даташит

Спецификация HLMP-HM63 изготовлена ​​​​«Avago» и имеет функцию, называемую «New 5mm Standard Oval LEDs».

Детали детали

Номер произв HLMP-HM63
Описание New 5mm Standard Oval LEDs
Производители Avago
логотип Avago логотип 

12 Pages
scroll

No Preview Available !

HLMP-HM63 Даташит, Описание, Даташиты
HLMP-HG63, HLMP-HM63, HLMP-HB63
Precision Optical Performance Red, Green and Blue
New 5mm Standard Oval LEDs
Data Sheet
www.DataSheet4U.com
Description
These Precision Optical Performance Oval LEDs are spe-
cifically designed for full color/video and passenger infor-
mation signs. The oval shaped radiation pattern and high
luminous intensity ensure that these devices are excellent
for wide field of view outdoor applications where a wide
viewing angle and readability in sunlight are essential.
The package epoxy contains both UV-A and UV-B inhibi-
tors to reduce the effects of long term exposure to direct
sunlight.
Applications
Full color signs
Features
Well defined spatial radiation pattern
High brightness material
Available in red, green and blue color.
Red AlInGaP 626nm
Green InGaN 525nm
Blue InGaN 470nm
Superior resistance to moisture
Standoff Package
Tinted and diffused
Typical viewing angle 40° x100°
Package Dimensions
Notes:
All dimensions in millimeters (inches).
Tolerance is ± 0.20mm unless other specified
Caution: InGaN devices are Class 1C HBM ESD sensitive per JEDEC Standard. Please observe appropriate
precautions during handling and processing. Refer to Application Note AN-1142 for additional details.










No Preview Available !

HLMP-HM63 Даташит, Описание, Даташиты
Device Selection Guide
Part Number
Color and Dominant Wavelength
ld (nm) Typ
Luminous Intensity Iv
(mcd) at 20 mA-Min
HLMP-HG63-TX0xx
Red 626
800
HLMP-HM63-Y30xx
Green 525
1990
HLMP-HB63-QU0xx
Blue 470
460
Tolerance for each intensity limit is ± 15%.
Notes:
1. The luminous intensity is measured on the mechanical axis of the lamp package.
Part Numbering System
HLMP- H x 63 – x x x x x
Packaging Option
ZZ: Flexi Ammopacks
DD: Ammopack
Color Bin Selection
0: Open distribution
Maximum Intensity Bin
Refer to Device Selection Guide
Minimum Intensity Bin
Refer to Device Selection Guide.
Color
B: Blue 470
G: Red 626
M: Green 525
Package
H: 5mm Standard Oval 40° x100°
Note: Please refer to AB 5337 for complete information about part numbering system.
www.DataSheet4U.com
Luminous Intensity Iv
(mcd) at 20 mA-Max
1990
5040
1150
Absolute Maximum Ratings, TA = 25°C
Parameter
DC Forward Current [1]
Peak Forward Current
Red
50
100 [2]
Power Dissipation
Reverse Voltage
LED Junction Temperature
120
5 (IR = 100 μA)
130
Operating Temperature Range
-40 to +100
Storage Temperature Range
-40 to +120
Blue and Green
30
100 [3, 4]
111
5 (IR = 10 μA)
110
-40 to +85
-40 to +100
Unit
mA
mA
mW
V
°C
°C
°C
Notes:
1. Derate linearly as shown in Figure 4 and Figure 8.
2. Duty Factor 30%, frequency 1kHz.
3. Duty Factor 10%, frequency 1KHz.
4. For long term performance with minimal light output degradation, drive current below 15mA is recommended for Blue LED.










No Preview Available !

HLMP-HM63 Даташит, Описание, Даташиты
Electrical / Optical Characteristics, TA = 25°C
Parameter
Forward Voltage
Red
Green
Blue
Reverse Voltage
Red
Green & blue
Dominant Wavelength [1]
Red
Green
Blue
Peak Wavelength
Red
Green
Blue
Thermal Resistance
Symbol
VF
VR
Min.
1.8
2.7
2.7
5
5
620
520
460
lPEAK
RqJ-PIN
www.DataSheet4U.com
Typ. Max. Units Test Conditions
2.1 2.4
3.2 3.7
3.2 3.7
V
IF = 20 mA
V
626 630
525 540
470 480
IR = 100 mA
IR = 10 mA
IF = 20 mA
634 Peak of Wavelength of Spectral
516 nm Distribution at IF = 20 mA
464
240 °C/W LED Junction-to pin
Luminous Efficacy [2]
Red
Green
Blue
Luminous Flux
Red
Green
Blue
Luminous Efficiency [3]
Red
Green
Blue
hV
jV
he
150 Emitted Luminous Power/Emitted
530 lm/W Radiant Power
65
1700 mlm IF = 20 mA
3700
990
40 lm/W Luminous Flux/Electrical Power
60 IF = 20 mA
16
Notes:
1. The dominant wavelength is derived from the chromaticity Diagram and represents the color of the lamp
2. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie = IV/hV where IV is the luminous intensity in candelas and hV is
the luminous efficacy in lumens/watt.
3. he = jV / IF x VF, where jV is the emitted luminous flux, IF is electrical forward current and VF is the forward voltage.











Скачать PDF:

[ HLMP-HM63.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HLMP-HM63New 5mm Standard Oval LEDsAvago
Avago

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск