|
|
Número de pieza | HMC853LC3C | |
Descripción | 28 Gbps D-Type Flip-Flop W/Programmable Output Voltage | |
Fabricantes | Hittite Microwave | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC853LC3C (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! v00.0909
HMC853LC3Cwww.DataSheet4U.com
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
The HMC853LC3C is ideal for:
• RF ATE Applications
7 • Broadband Test & Measurement
• Serial Data Transmission up to 28 Gbps
• Digital Logic Systems up to 28 GHz
Features
Differential & Singe-Ended Operation
Fast Rise and Fall Times: 15/14 ps
Low Power Consumption: 240 mW typ.
Programmable Differential
Output Voltage Swing: 700 - 1300 mV
Single Supply: -3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
7 - 196
Functional Diagram
General Description
The HMC853LC3C is a D-type Flip Flop designed to
support data transmission rates of up to 28 Gbps, and
clock frequencies as high as 28 GHz. During normal
operation, data is transferred to the outputs on the
positive edge of the clock. Reversing the clock inputs
allows for negative-edge triggered applications. The
HMC853LC3C also features an output level control pin,
VR, which allows for loss compensation or for signal
level optimization.
All input signals to the HMC853LC3C are terminated
with 50 Ohms to ground on-chip, and maybe either
AC or DC coupled. The differential outputs of the
HMC853LC3C may be either AC or DC coupled. Out-
puts can be connected directly to a 50 Ohm to ground
terminated system, while DC blocking capacitors
may be used if the terminating system is 50 Ohms to a
non-ground DC voltage. The HMC853LC3C operates
from a single -3.3V DC supply and is available in a
ceramic RoHS compliant 3x3 mm SMT package.
Electrical Specifications, TA = +25°C, Vee = -3.3V, VR = 0
Parameter
Conditions
Min.
Power Supply Voltage
-3.6
Power Supply Current
Maximum Data Rate
Maximum Clock Rate
Input Voltage Range
-1.0
Input Differential Voltage
0.1
Input Return Loss, Output Return Loss
Frequency <24 GHz
Output Amplitude
Single-Ended, peak-to-peak
Differential, peak-to-peak
Output High Voltage
Typ.
-3.3
73
28
28
10
550
1100
-10
Max
-3.0
+0.5
2.0
Units
V
mA
Gbps
GHz
V
V
dB
mVpp
mVpp
mV
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page v00.0909
HMC853LC3Cwww.DataSheet4U.com
28 Gbps, D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
7
Absolute Maximum Ratings
Power Supply Voltage (Vee)
Input Signals
Output Signals
Storage Temperature
Operating Temperature
-3.75V to +0.5V
-2V to +0.5V
-1.5V to +1V
-65°C to +150°C
-40°C to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
7 - 200
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO Vee.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet HMC853LC3C.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC853LC3C | 28 Gbps D-Type Flip-Flop W/Programmable Output Voltage | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |