|
|
PDF B57981S Data sheet ( Hoja de datos )
| Número de pieza | B57981S | |
| Descripción | NTC thermistors | |
| Fabricantes | EPCOS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B57981S (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
NTC thermistors for
temperature measurement
Leaded NTC thermistors,
lead spacing 2.5 mm
Series/Type:
Date:
B57981S
February 2009
www.DataSheet4U.com
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
1 page  
Temperature measurement
Leaded NTC thermistors, lead spacing 2.5 mm
B57981S
S981
R/T No.
T (°C)
160.0
165.0
170.0
175.0
180.0
185.0
190.0
195.0
200.0
205.0
210.0
215.0
220.0
225.0
230.0
235.0
240.0
245.0
250.0
1008
2003
2908
B25/100 = 3560 K
B25/100 = 3980 K
B25/100 = 3460 K
RT/R25
0.02279
0.020667
α (%/K) RT/R25
2.0
2.0
α (%/K) RT/R25
α (%/K)
0.01878
0.01709
0.015582
0.014227
0.013012
0.011934
0.010964
0.0101
0.0093191
0.0085949
1.9
1.9
1.8
1.8
1.8
1.7
1.7
1.7
1.6
1.6
0.0079384
0.0073411
0.006798
0.0063087
0.0058623
0.0054487
0.0050705
1.6
1.5
1.5
1.5
1.5
1.4
1.4
www.DataSheet4U.com
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 18
5 Page 
Temperature measurement
Leaded NTC thermistors, lead spacing 2.5 mm
B57981S
S981
Mounting instructions
1 Soldering
1.1 Leaded NTC thermistors
Leaded thermistors comply with the solderability requirements specified by CECC.
When soldering, care must be taken that the NTC thermistors are not damaged by excessive
heat. The following maximum temperatures, maximum time spans and minimum distances have
to be observed:
Bath temperature
Soldering time
Distance from thermistor
Dip soldering
max. 260 °C
max. 4 s
min. 6 mm
Iron soldering
max. 360 °C
max. 2 s
min. 6 mm
Under more severe soldering conditions the resistance may change.
1.2 Leadless NTC thermistors
In case of NTC thermistors without leads, soldering is restricted to devices which are provided
with a solderable metallization. The temperature shock caused by the application of hot solder
may produce fine cracks in the ceramic, resulting in changes in resistance.
To prevent leaching of the metallization, solder with silver additives or with a low tin content
should be used. In addition, soldering methods should be employed which permit short soldering
times.
2 Clamp contacting
Pressure contacting by means of clamps is particularly suitable for applications involving frequent
switching and high turn-on powers.
3 Robustness of terminations (leaded types)
The leads meet the requirements of IEC 60068-2-21. They may not be bent closer than 4 mm
wwfrwom.DtahteaSsholedeetr4Ujo.incot mon the thermistor body or from the point at which they leave the feed-
throughs. During bending, any mechanical stress at the outlet of the leads must be removed. The
bending radius should be at least 0.75 mm.
Tensile strength:
Test Ua1:
Leads
∅ ≤0.25 mm = 1.0 N
0.25 < ∅ ≤0.35 mm = 2.5 N
0.35 < ∅ ≤0.50 mm = 5.0 N
0.50 < ∅ ≤0.80 mm = 10.0 N
0.80 < ∅ ≤1.25 mm = 20.0 N
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 18
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet B57981S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B57981S | NTC thermistors | EPCOS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |