|
|
PDF N2780A Data sheet ( Hoja de datos )
| Número de pieza | N2780A | |
| Descripción | AC/DC Current Probes | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de N2780A (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
N2780A Series AC/DC Current Probes
A wide selection of current probes to meet
your application's needs
Data Sheet
Hybrid technology for AC and DC measurements
Using hybrid technology that includes a Hall-effect sensor and an AC current
transformer, the probes provide accurate measurement of DC or AC currents up to
500 Arms (for model N2780A) or DC–100 MHz (for model N2783A), without break-
ing into the circuit. Using split core construction, the probe easily clips on and off
of a conductor.
Figure 1 N2780A Series current probes
with N2779A power supply
• Various bandwidths: DC to 2 MHz,
10 MHz, 50 MHz, 100 MHz
• DC and AC measurements
• Superior 1% accuracy and high
signal-to-noise ratio
• Overload-protect function prevents
probe damage from excessive input
• Direct connection to high-impedance
1 MΩ BNC input of oscilloscope
• “Demagnetize” button to remove any
residual magnetism that builds up in
the magnetic core
• External power supply (N2779A) lets
you connect up to three N278xA
current probes to a single power
supply
Wide range of applications
The current probes feature broad measurement ranges (up to 500 A), flat frequen-
cy response, low noise and low insertion loss that make the probes ideal for cur-
rent measurements in areas such as measuring steady state or transient current
of motor drives, switching power supplies, inverters, controllers, sensors, disk
drives, LCD displays, electronic ballasts and amplifiers. The high signal-to-noise
ratio of the N2782A and N2783A makes them ideal for making low-level current
measurements in milliampere ranges.
Accurate current measurement
A built-in DEMAG (demagnetize) function allows the removal of any residual
magnetism that has built up in the magnetic core due to power on/off switching
or excessive input current. In addition, voltage offset or temperature drift on the
probe can be easily corrected by using the zero adjustment control.
Compatible with any oscilloscope
with a high-impedance BNC input, the
www.DanteawShNee2t748U0.AcoSmeries current probes
offer accurate and reliable solution for
measuring DC and AC currents.
Figure 2 N2783A, N2780A, N2781A and N2782A current probe (from left to right)
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet N2780A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| N2780A | AC/DC Current Probes | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |