|
|
PDF 81600B Data sheet ( Hoja de datos )
| Número de pieza | 81600B | |
| Descripción | Tunable Laser Source Family | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de 81600B (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
Agilent 81600B
Tunable Laser Source Family
Technical Specifications
August 2007
www.DataSheet4U.com
The Agilent 81600B Tunable Laser Source Family
offers the full wavelength range from 1260 nm to
1640 nm with the minimum number of lasers and
no wavelength gaps. This provides test instrumen-
tation with maximum flexibility.
Investing in the Agilent 81600B Tunable Laser
Source Family can realize the cost efficiency and
performance required to test components for
coarse and dense wavelength division multiplexing
(CWDM, DWDM) and passive optical networks
(PON).
1 page  
81600B opt. 150 Tunable Laser Source, 1450 nm – 1590 nm, low SSE
Agilent 81600B opt. 150
Wavelength range
1450 nm to 1590 nm
Wavelength resolution
0.1 pm, 12.5 MHz at 1550 nm
Mode-hop free tunability
full wavelength range; see page 10 for conditions to assure mode-hop free
continuous sweeps
Maximum sweep speed
80 nm/s
Stepped mode
Continuous sweep mode (typ.)
at 5 nm/s
at 40 nm/s
at 80 nm/s
Absolute wavelength accuracy [1]
±10 pm, typ. ±3.6 pm ±4.0 pm
±4.6 pm
±6.1 pm
Relative wavelength accuracy [1]
±5 pm, typ. ±2 pm
±2.4 pm
±2.8 pm
±4.0 pm
Wavelength repeatability
±0.8 pm, typ. ±0.5 pm ±0.3 pm
±0.4 pm
±0.7 pm
Wavelength stability [3] (typ.)
d ±1 pm, 24 hours
Linewidth (typ.), coherence control off
100 kHz
Effective linewidth (typ.), coherence ctrl. on
> 50 MHz (1480 nm – 1580 nm, at max. constant output power)
Output 1 (low SSE)
Output 2 (high power)
Maximum output power
t –1 dBm peak (typ.)
t +7 dBm peak (typ.)
(continuous power during sweep)
t –3 dBm (1520 nm – 1570 nm)
t +5 dBm (1520 nm – 1570 nm)
t –6 dBm (1480 nm – 1580 nm)
t –7 dBm (1450 nm –1590 nm)
t +4 dBm (1480 nm – 1580 nm)
t –1 dBm (1450 nm – 1590 nm)
Attenuation
max 60 dB
Power repeatability (typ.)
±0.003 dB
Power stability [3]
±0.01 dB, 1 hour
typ. ±0.03 dB, 24 hours
Power linearity
±0.1 dB
±0.1 dB
(±0.3 dB in attenuation mode)
Power flatness versus wavelength
±0.2 dB, typ. ±0.1 dB
±0.3 dB, typ. ±0.15 dB
Continuous sweep mode
at 5 nm/s
at 40 nm/s
at 80 nm/s
Dynamic power reproducibility (typ.)
±0.005 dB
±0.01 dB
±0.015 dB
Dynamic relative power flatness (typ.)
±0.01 dB
±0.02 dB
±0.04 dB
Side-mode suppression ratio (typ.) [2]
t 40 dB (1480 nm – 1580 nm)
Output 1 (low SSE)
Output 2 (high power)
Signal to source
t 65 dB/nm (1520 nm –1570 nm)
t 45 dB/nm (1520 nm – 1570 nm)
spontaneous emission ratio [2]
t 75 dB/0.1 nm
t 55 dB/0.1 nm
(typ., 1520 nm – 1570 nm)
(typ., 1520 nm – 1570 nm)
t 61 dB/nm (typ., 1480 nm – 1580 nm) t 42 dB/nm (1480 nm – 1580 nm)
t 59 dB/nm (typ., 1450 nm – 1590 nm) t 37 dB/nm (1450 nm – 1590 nm)
Signal to total source
t 60 dB (1520 nm – 1570 nm)
t 30 dB (typ., 1520 nm – 1570 nm)
spontaneous emission ratio [2]
t 50 dB (typ., 1450 nm – 1590 nm)
Relative intensity noise (RIN) (0.1 – 6 GHz) (typ.) [2] –145 dB/Hz (1480 nm – 1580 nm)
2.3
[1] Valid for one month and within a ±4.4 K temperature range after automatic wavelength zeroing.
[2] At maximum output power as specified per wavelength range.
[3] At constant temperature ±1 K
www.DataSheet4U.com
Page 5 of 12
5 Page 
Ordering Information
Lightwave Solution Mainframe:
8164B
Tunable Laser Module:
81600B
One of the following is required:
Option 210 All-band Tunable Laser Source
1455 nm to 1640 nm, low SSE
Option 160 Tunable Laser Source
1495 nm to 1640 nm, low SSE
Option 150 Tunable Laser Source
1450 nm to 1590 nm, low SSE
Option 140 Tunable Laser Source
1370 nm to 1495 nm, low SSE
Option 130 Tunable Laser Source
1260 nm to 1375 nm, low SSE
Option 142 Tunable Laser Source
1370 nm to 1495 nm, high power
Option 132 Tunable Laser Source
1260 nm to 1375 nm, high power
Connector Option:
One of the following is required:
Option 071: PMF, straight contact output connector.
Option 072: PMF, angled contact output connector.
Other Option:
Option 003: Built-in optical attenuator,
60 dB attenuation
(for Option 142).
Connector Interface:
One Agilent 81000xI-series connector interface is
required for Options 142 and 132.
Two Agilent 81000xI-series connector interfaces are
required for Options 201, 160, 150, 140, and 130.
TLS Upgrade option:
Upgrade an Agilent tunable laser source to the latest 81600B
Family product.
81600B #UG7 upgrades the products 81640A/B, 81680A/B,
81480A/B, 81642A/B, 81682A/B or 81482B
to 81600B #201 tunable laser.
For details, please contact your local Agilent sales
representative.
Custom-made TLS:
A 1650 nm Tunable Laser Source is available on request.
Please contact your local Agilent Sales Office.
Laser Safety Information
All laser sources specified by this data sheet are classified as
Class 1M according to IEC 60825-1 (2001).
All laser sources comply with 21 CFR 1040.10
except for deviations pursuant to Laser Notice No. 50,
dated 2001-July-26.
www.DataSheet4U.com
Page 11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet 81600B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 81600B | Tunable Laser Source Family | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |