|
|
PDF HCPL-0300 Data sheet ( Hoja de datos )
| Número de pieza | HCPL-0300 | |
| Descripción | (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler | |
| Fabricantes | AVAGO TECHNOLOGIES | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HCPL-0300 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
HCPL-2300, HCPL-0300
8 MBd Low Input Current Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-2300/HCPL-0300 optocoupler combines
an 820 nm AlGaAs photon emitting diode with an
integrated high gain photon detector. This combina-tion
of Avago designed and manufactured semiconductor
devices brings new high performance capabilities to
designers of isolated logic and data communication cir-
cuits.
The new low current, high speed AlGaAs emitter manu-
factured with a unique diffused junction, has the virtue
of fast rise and fall times at low drive currents. Figure 6 il-
lustrates the propagation delay vs. input current charac-
teristic. These unique characteristics enable this device
to be used in an RS-232-C interface with ground loop iso-
lation and improved common mode rejection. As a line
receiver, the HCPL-2300/HCPL-0300 will operate over
longer line lengths for a given data rate because of lower
IF and VF specifications.
Functional Diagram
NC 1
8 VCC
ANODE 2
7 RL
CATHODE 3
6 VOUT
Features
• Guaranteed low thresholds: IF = 0.5 mA, VF ≤ 1.5 V
• High speed: guaranteed 5 MBd over temperature
• Versatile: compatible with TTL, LSTTL and CMOS
• Efficient 820 nm AlGaAs LED
• Internal shield for guaranteed common mode
rejection
• Schottky clamped, open collector output with
optional integrated pull-up resistor
• Static and dynamic performance guaranteed from
-40°C to 85°C
• Safety approval
– UL recognized -3750 V rms for 1 minute
– CSA approved
– IEC/EN/DIN EN 60747-5-2 approved with
VIORM = 630 V peak (Option 060)
Applications
• Ground loop elimination
• Computer-peripheral interfaces
• Level shifting
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
• RS-232-C interface
• High speed, long distance isolated line receiver
NC 4
5 GND
A 0.1 pF bypass capacitor must be connected between pins 5 and 8.
www.DataSheet4U.net
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
1 page  
Solder Reflow Temperature Profile
Note: Non-halide flux should be used.
Recommended Pb-Free IR Profile
Note: Non-halide flux should be used.
Regulatory Information
The HCPL-2300 has been approved by the following or-
ganizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice #5,
File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
(Option 060 only)
Insulation and Safety Related Specifications
Parameter
Symbol Value Units Conditions
Min. External Air Gap
(External Clearance)
L(IO1) 7.1
mm Measured from input terminals to output
terminals, shortest distance through air
Min. External Tracking Path
(External Creepage)
L(IO2) 7.4
mm Measured from input terminals to output
terminals, shortest distance path along body
Min. Internal Plastic Gap
(Internal Clearance)
0.08 mm Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity
Tracking Resistance
CTI
200
Volts
DIN IEC 112/VDE 0303 PART 1
(Comparative Tracking Index)
Isolation Group
IIIa Material Group (DIN VDE 0110, 1/89, Table 1)
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
5 Page 
A recommended layout for use with an internal 1000 Ω
rbagenrysepieasaxttsoetserrrctonharaaplnaapncouitrelolex-ruqtepiusranrgelaitsvloiespt5nuoVlril.n-fAuoFsprigiolrluueurtssepitsrut1aot9trev. doValnCitCnad1gFirseiegulquesurveeierd1elsd9w(,ViVatOCnhC)
oinpptuiotnaanldVCtChaenodutGpNuDt letraadcseocfatnhebeHCloPcLa-t2e3d00b/eHtwCPeLe-n03th00e
to provide additional noise immunity at the compromise
of insulation capability (VI-O).
Figure 11. Thermal derating curve, dependence
of safety limiting value with case temperature
per IEC/EN/DIN EN 60747-5-2.
HCPL-2300/
HCPL-0300
Figure 12. Recommended shunt drive circuit for interfacing between TTL/LSTTL/CMOS logic systems.
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet HCPL-0300.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HCPL-0300 | (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler |  Agilent |
| HCPL-0300 | (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler | AVAGO TECHNOLOGIES |
| HCPL-0302 | (HCPL-3020 / HCPL-0302) 0.4 Amp Output Current IGBT Gate Drive Optocoupler |  Avago |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |