B140XW02-V1 Datasheet PDF - AUO
| Part Number | B140XW02-V1 | |
| Description | LCD Module | |
| Manufacturers | AUO | |
| Logo |  |
|
|
There is a preview and B140XW02-V1 download ( pdf file ) link at the bottom of this page. Total 35 Pages | ||
Preview 1 page No Preview Available !
This Datasheet has been downloaded from:
DisplayAlliance.com
ISO 9001 : 2008
www.DataSheet4U.net
|
| |
 
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module
that a LED light bar build in as a light source of back light unit. High voltage is supplied to
these parts when power turn on.
B140XW02 V0 Document Version: 0.0
4 of 34
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for B140XW02-V1 electronic component. |
| Information | Total 35 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ B140XW02-V1.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| B140XW02-V0 | The function is LCD Module. AUO | |
| B140XW02-V1 | The function is LCD Module. AUO | |
| B140XW02-V2 | The function is LCD Module. AUO | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
B140
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||