DataSheet26.com

NL10276AC30-07 PDF даташит

Спецификация NL10276AC30-07 изготовлена ​​​​«NEC» и имеет функцию, называемую «LCD Module».

Детали детали

Номер произв NL10276AC30-07
Описание LCD Module
Производители NEC
логотип NEC логотип 

29 Pages
scroll

No Preview Available !

NL10276AC30-07 Даташит, Описание, Даташиты
www.DataSheet4U.net
DOD-M-0276 1/29
TFT COLOR LCD MODULE
NL10276AC30-07
38cm (15 Type)
XGA
SPECIFICATIONS
(3rd Edition)
PRELIMINARY
All information in this document is subject to change without prior notice.
1st Engineering Department
Color LCD Division
Display Device Operations Unit
NEC Electron Devices
NEC Corporation
Approved by
Date
Mar. 30, 2001
Checked by
Date
Prepared by
Date
Mar. 30, 2001
NEC Cwwowr.pDaotarSaheteit4oUn.net









No Preview Available !

NL10276AC30-07 Даташит, Описание, Даташиты
www.DataSheet4U.net
DOD-M-0276 2/29
INTRODUCTION
No part of this SPECIFICATIONS shall be copied in any form or by any means without the prior written
consent of NEC Corporation.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product described herein or any other liability
arising from use of such application. No license, express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or of others.
While NEC Corporation has been making continuous effort to enhance the reliability of its products, the
possibility of failures cannot be eliminated entirely. To minimize risks of damage to property or injury to
person arising from a failure in an NEC product, customers must incorporate sufficient safety measures in
their design, such as redundancy, fire-containment and anti-failure features.
NEC products are classified into the following three quality grades:
"Standard", "Special", "Specific"
The "Specific" quality grade applies only to applications developed based on a customer designated
"quality assurance program" for a specific application. The recommended applications of a product depend
on its quality grade, as indicated below. Customers must check the quality grade of each application before
using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Military systems, aircraft, aerospace equipment, submersible repeaters, nuclear reactor control
systems, life support systems (medical equipment, etc.) and any other equipment
The quality grade of this product is "Standard" unless otherwise specified in this SPECIFICATIONS. If
customers intend to use this product for applications other than those specified for "Standard" quality
grade, they should contact an NEC Corporation sales representative in advance.
Anti-radioactive design is not implemented in this product.
NEC Cwwowr.pDaotarSaheteit4oUn.net









No Preview Available !

NL10276AC30-07 Даташит, Описание, Даташиты
www.DataSheet4U.net
DOD-M-0276 3/29
CONTENTS
1. OUTLINE........................................................................................................................................................ 4
1.1 STRUCTURE AND PRINCIPLE.......................................................................................................... 4
1.2 APPLICATIONS.................................................................................................................................... 4
1.3 FEATURES............................................................................................................................................ 4
2. GENERAL SPECIFICATIONS ................................................................................................................... 5
3. BLOCK DIAGRAM....................................................................................................................................... 6
4. DETAILED SPECIFICATIONS .................................................................................................................. 7
4.1 MECHANICAL SPECIFICATIONS..................................................................................................... 7
4.2 ABSOLUTE MAXIMUM RATINGS ................................................................................................... 7
4.3 ELECTRICAL CHARACTERISTICS .................................................................................................. 8
4.3.1 Driving for LCD panel signal processing board and driver......................................................... 8
4.3.2 Driving for backlight inverter...................................................................................................... 8
4.3.3 Supply voltage ripple................................................................................................................... 9
4.3.4 Fuses ............................................................................................................................................ 9
4.4 SUPPLY VOLTAGE SEQUENCE ..................................................................................................... 10
4.4.1 Sequence for LCD panel signal processing board..................................................................... 10
4.4.2 Sequence for backlight inverter................................................................................................. 10
4.5 CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS ....................................................... 11
4.5.1 LCD panel signal processing board........................................................................................... 11
4.5.2 Backlight inverter ...................................................................................................................... 12
4.5.3 Position of sockets..................................................................................................................... 13
4.6 LUMINANCE CONTROLS ................................................................................................................ 14
4.6.1 Luminance control method ........................................................................................................ 14
4.6.2 Luminance control with external pulse...................................................................................... 14
4.7 DISPLAY COLORS TO INPUT DATA SIGNALS ........................................................................... 16
4.8 DISPLAY POSITIONS........................................................................................................................ 17
4.9 INPUT SIGNAL TIMINGS ................................................................................................................. 18
4.9.1 Definition of input signal timings.............................................................................................. 18
4.9.2 General input signal timing chart .............................................................................................. 19
4.9.3 Detailed input signal timing chart.............................................................................................. 20
4.9.4 Timing characteristics (2 port input) ......................................................................................... 21
4.10 OPTICAL CHARACTERISTICS...................................................................................................... 22
5. RELIABILITY TEST .................................................................................................................................. 24
6. PRECAUTIONS........................................................................................................................................... 25
6.1 MEANING OF CAUTION SIGNS...................................................................................................... 25
6.2 CAUTIONS.......................................................................................................................................... 25
6.3 ATTENTIONS ..................................................................................................................................... 25
7. OUTLINE DRAWINGS .............................................................................................................................. 27
7.1 Front view ........................................................................................................................................... 27
7.2 Rear view............................................................................................................................................. 28
NEC Cwwowr.pDaotarSaheteit4oUn.net










Скачать PDF:

[ NL10276AC30-07.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NL10276AC30-0138 cm 15 inches / 1024 x 768 pixels / Full-color / Multi-scan Function / Built-in backlight with inverter Ultra wide viewing angleNEC
NEC
NL10276AC30-01A38 cm 15 inches / 1024 x 768 pixels / Full-color / Multi-scan Function / Built-in backlight with inverter Ultra wide viewing angleNEC
NEC
NL10276AC30-0338 cm 15.0 inches / 1024 x 768 pixels / FULL-COLOR / MULTI-SCAN FUNCTION Wide viewing angleNEC
NEC
NL10276AC30-03LLCD ModuleNEC
NEC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск