DataSheet26.com

OPI1270-032 PDF даташит

Спецификация OPI1270-032 изготовлена ​​​​«OPTEK Technologies» и имеет функцию, называемую «Axial Fiber Optic Isolator».

Детали детали

Номер произв OPI1270-032
Описание Axial Fiber Optic Isolator
Производители OPTEK Technologies
логотип OPTEK Technologies логотип 

2 Pages
scroll

No Preview Available !

OPI1270-032 Даташит, Описание, Даташиты
www.DataSheet4U.net
Axial Fiber Optic Isolator
OP1270 Series
Features:
Opaque plastic housings
High noise immunity
Visible Red LED with Phototranisitor Output
0.05” (1.27 mm) lead spacing
Data Transfer through plastic fiber optic cable
Description:
Each OPI1270 consists of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded
plastic housings and coupled by plastic fiber optic cable. The heavy-duty opaque housing shields the optical signal from dust,
making this series of devices ideal for dust contaminated environments.
The OPI1270 series are designed for applications that require high voltage isolation between input and output. Depending on
the length of the fiber optic cable, the emitter does not have to be optically in-line with the sensor.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more
information.
Applications:
Requiring High Voltage isolation between input and output
Electrical isolation in dirty environments
Industrial equipment
Medical equipment
Office equipment
Dash Number in mm
Part
Number
OPI1270-032
OPI1270-040
OPI1270-080
Ordering Information
Device Length
LED Peak
Wavelength
Lead
Length
32mm (1.26”)
40mm (1.57”)
80mm (3.15”)
645 nm
0.45”
(11.4 mm)
13
24
Pin #
1
2
LED
Anode
Cathode
Pin #
3
4
Transistor
Emitter
Collector
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 03/06
Page 1 of 2









No Preview Available !

OPI1270-032 Даташит, Описание, Даташиты
www.DataSheet4U.net
Axial Fiber Optic Isolator
OP1270-032, OP1260-040, OP1270-080
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage Temperature Range
-40o C to +100o C
Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Power Dissipation (2)
-20°C to +85°C
260° C(1)
100 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
LED (see OVLAS6CB8 for additional information)
VF On-State Collector Current
0.9 -
1.5
IR Collector-Dark Current
- - 80
SENSOR—Phototransistor (See OP506 for additional information)
V IF = 20 mA
µA VR = 3.0 V
ICEO Collector Dark Current
V(BR)CEO Collector-Emitter Breakdown Voltage
V(BR)ECO Emitter-Collector Breakdown Voltage
COUPLED
-
33
5.5
-
-
-
50 nA VCE = 10 V, EE = 0
- V IC = 100 µA, EE = 0
- V IE = 100 µA, EE = 0
IC(ON)
IISO(3)
0.36 -
--
- mA VCE = 5 V, IF = 10 mA
1.0 µA I @ 7 KV RMS, 25°C, Test Duration = 2 sec.
Notes:
1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force
may be applied to the leads when soldering.
2. Derate linearly 1.33 mW/°C above 25°C.
3. Isolation voltage testing is required.
Output Current vs Forward Current vs
Temperature
5.0
Normalized IF = 10mA, Vce = 5V, Ta = 20°C
4.5
4.0
3.5
3.0
2.5
2.0
-20° C
1.5
0° C
20° C
1.0
40° C
60° C
80° C
0.5
0.0
0
5 10 15 20 25 30 35 40
Forward Current ( mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 03/06
Page 2 of 2
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com










Скачать PDF:

[ OPI1270-032.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OPI1270-032Axial Fiber Optic IsolatorOPTEK Technologies
OPTEK Technologies

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск