|
|
PDF B089AW01_V2 Data sheet ( Hoja de datos )
| Número de pieza | B089AW01_V2 | |
| Descripción | LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de B089AW01_V2 (archivo pdf) en la parte inferior de esta página. Total 35 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
Produktspezifikation für AUO B089AW01 V2
Im Programm von
Achtung:
Dieses Dokument unterliegt nicht dem Änderungsdienst. Der Stand
entspricht der Drucklegung. Bitte informieren Sie sich vor Verwendung
ob die technischen Daten noch dem aktuellen Stand entsprechen. Trotz
sorgfältiger Kontrolle können wir leider keine Haftung für Druckfehler
oder Irrtümer übernehmen.
1 page  
www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that
a LED light bar build in as a light source of back light unit. It can prevent electrostic
breakdown.
document version 1.1
4 of 34
5 Page 
www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
Note8. Definition of viewing angle
≧Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180°horizontal and
180°vertical range (off-normal viewing angles). The 180°viewing angle range is broken down as follows; 90°(θ)
horizontal left and right and 90°(Φ) vertical, high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated about its center to develop the desired measurement
viewing angle.
document version 1.1
10 of 34
11 Page | ||
| Páginas | Total 35 Páginas | |
| PDF Descargar | [ Datasheet B089AW01_V2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| B089AW01_V0 | LCD Module | AUO |
| B089AW01_V1 | LCD Module | AUO |
| B089AW01_V2 | LCD Module | AUO |
| B089AW01_V3 | LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |