DataSheet26.com

SF1143B-1 PDF даташит

Спецификация SF1143B-1 изготовлена ​​​​«RF Monolithics» и имеет функцию, называемую «SAW Filter».

Детали детали

Номер произв SF1143B-1
Описание SAW Filter
Производители RF Monolithics
логотип RF Monolithics логотип 

3 Pages
scroll

No Preview Available !

SF1143B-1 Даташит, Описание, Даташиты
®
• Designed for SDARS IF Receiver
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
SF1143B-1
315 MHz
SAW Notch Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Max Soldering Profile
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
265°C for 10 s
SMP-03
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
Passband 1 low frequency
Passband 1 high frequency
Passband 2 low frequency
Passband 2 high frequency
Notch 3dB rejection band relative to Passband 1 and Passband 2:
3dB low frequency rejection
3dB high frequency rejection
Maximum Notch depth at fc
Amplitude Ripple over Passband 1 +Passband 2
Group Delay Variation over Passband 1 +Passband 2
Rejection
100 MHz to fc-10.3 and fc+10.3 to fc+100 MHz
Operating Temperature Range
Differential Input and Output Impedance
Case Style
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Sym
fC
IL
BW3
Notes
1
1, 2
www.DataSheet.net/
GDV
TA
1, 2, 3
1
6
Min
313.435
321.685
Typ
315.0
15.1
Max
17.0
309.40
317.965
Units
MHz
dB
MHz
MHz
MHz
MHz
315.030
MHz
315.865
-10 dB
1.0 dBP-P
23 200 nsP-P
40 dB
-40 +85 °C
250 ohms
SMP-03 7 x 5 mm Nominal Footprint
RFM SF1143B-1 YYWWS
Electrical Connections
Connection
Port 1 Hot
Port 1 Ground Return
Port 2 Hot
Port 2 Ground Return
Case Ground
Terminals
10
1
5
6
All Others
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance
matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject to change.
6. Tape and Reel Standard ANSI / EIA 481.
7. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
8. US and international patents may apply.
9. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
10. ©Copyright 1999, RF Monolithics Inc.
11. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF1143B-1-051804
Page 1 of 3
Datasheet pdf - http://www.DataSheet4U.co.kr/









No Preview Available !

SF1143B-1 Даташит, Описание, Даташиты
315.00 MHz
Tape and Reel Specifications
SAW Filter
See Detail "A"
“B “
Nominal Size
Inches millimeters
7 178
13 330
Quantity Per Reel
500
2000
1162.0.0
2.0
www.DataSheet.net/
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao
Bo
Ko
Pitch
W
5.5 mm
7.5 mm
2.0 mm
8.0 mm
16.0 mm
PIN #1
USER DIRECTION OF FEED
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF1143B-1-051804
Page 2 of 3
Datasheet pdf - http://www.DataSheet4U.co.kr/









No Preview Available !

SF1143B-1 Даташит, Описание, Даташиты
315.00 MHz
SAW Filter
10-Terminal Ceramic Surface-Mount Case
7 x 5 mm Nominal Footprint
B
1 10
Case Dimensions
Dimension
mm
Min Nom Max
Inches
Min Nom Max
A 6.80 7.00 7.20 0.268 0.276 0.283
B 4.80 5.00 5.20 0.189 0.197 0.205
C
1.65 2.00
0.065 0.079
D 0.60
0.024
E 2.54
0.100
H 1.0
0.039
J 5.00
0.197
K 3.00
0.118
P 1.27
0.050
Electrical Connections
Connection
Port 1 Input or Return
Return or Input
Port 2 Output or Return
w Return or Output
Ground
Single Ended Operation
Differential Operation
Terminals
10
1
5
6w
All others
Return is ground
Return is hot
C
H
E
10
1
29
D9
2
3 8A
47
83
P
74
56
TOP VIEW
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
65
BOTTOM VIEW
http://www.rfm.com
SF1143B-1-051804
Page 3 of 3
D










Скачать PDF:

[ SF1143B-1.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SF1143B-1SAW FilterRF Monolithics
RF Monolithics
SF1143B-2SAW FilterRF Monolithics
RF Monolithics
SF1143B-4SAW FilterRF Monolithics
RF Monolithics

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск