|
|
Número de pieza | SF2024B | |
Descripción | SAW Filter | |
Fabricantes | RF Monolithics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SF2024B (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! ®
• Designed for SDARS Receiver IF Application
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
SF2024B
467.751 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Electrical Characteristics
Value
Units
+10 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SMP-03
Characteristic
Nominal Center Frequency
Passband
Minimum Insertion Loss
1.5 dB Passband
3 dB Passband
Amplitude Ripple from fc-6.344 MHz to fc-4.2985 MHz (-20 to 85°C)
Amplitude Ripple from fc-6.344 MHz to fc-4.2985 MHz (-40 to -20°C)
Amplitude Ripple from fc-4.4865 MHz to fc-2.441 MHz
Amplitude Ripple from fc-2.629 MHz to fc+0.069 MHz
Amplitude Ripple from fc-0.069 MHz to fc+2.629 MHz
Amplitude Ripple from fc+2.441 MHz to fc+4.4865 MHz
Amplitude Ripple from fc+4.2985 MHz to fc+6.344 MHz (-40 to 50°C)
Amplitude Ripple from fc+4.2985 MHz to fc+6.344 MHz (50 to 85°C)
Group Delay Variation over fc-6.344 MHz to fc-2.441 MHz
and from fc+6.344 MHz to fc+2.441 MHz
Group Delay Variation over fc±2.629 MHz
Rejection
fc-33 to fc-12 MHz and fc+12 to fc+33 MHz
fc-12 to fc-10.5 MHz
fc+9 to fc+12 MHz
Operating Temperature Range
Differential Input and Output Impedance
Case Style
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Sym
fC
IL
BW1.5
BW3
www.DataSheet.net/
GDV1
GDV2
TA
Notes
1
1, 2
1, 2, 3
1
6
Min Typ Max
467.751
Units
MHz
18 20 dB
14.2
15
MHz
1
1.25
1
1
1
dBP-P
1
1
1.25
60 80 nsP-P
60 120
32 40
24 40
dB
10 24
-40 +85 °C
150 ohms
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2024B YYWWS
Electrical Connections
Connection
Port 1 Hot
Port 1 Ground Return
Port 2 Hot
Port 2 Ground Return
Case Ground
Terminals
10
1
5
6
All Others
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature
range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the pass-
band. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and
"ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject
to change.
6. Tape and Reel Standard Per ANSI / EIA 481.
7. Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1 and
Port 2, so that the filter must always be installed in one direction per the circuit
design.
8. US and international patents may apply.
9. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
10. ©Copyright 1999, RF Monolithics Inc.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2024B-111504
Page 1 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page 467.751 MHz
Tape and Reel Specifications
SAW Filter
See Detail "A"
“B “
Nominal Size
Inches millimeters
7 178
13 330
Quantity Per Reel
500
2000
1162.0.0
2.0
www.DataSheet.net/
COMPONENT ORIENTATION and DIMENSIONS
Carrier Tape Dimensions
Ao
Bo
Ko
Pitch
W
5.5 mm
7.5 mm
2.0 mm
8.0 mm
16.0 mm
PIN #1
USER DIRECTION OF FEED
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2024B-111504
Page 5 of 5
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet SF2024B.PDF ] |
Número de pieza | Descripción | Fabricantes |
SF2024B | SAW Filter | RF Monolithics |
SF2024D | SAW Filter | RF Monolithics |
SF2024D-1 | SAW Filter | RF Monolithics |
SF2024E-1 | SAW Filter | RF Monolithics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |