|
|
PDF SF2042B Data sheet ( Hoja de datos )
| Número de pieza | SF2042B | |
| Descripción | SAW Filter | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SF2042B (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
®
• Designed for 802.16 and WIMAX Receiver IF Application
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) Pb
SF2042B
456.00 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
Value
Units
+13 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SMP-03
Electrical Characteristics
Characteristic
Nominal Center Frequency @ 25°C
Insertion Loss @ 25°C
Differential Impedance line-to-line
Passband 1dB
Passband 3dB
Group Delay
Absolute Group Delay Variation; CF ±6.4 MHz
Return Loss
Rejection
DC to 256 MHz
256 to 360 MHz
360 to 416
416 to 443 MHz
470 to 656 MHz
656 to 946 MHz
Equivalent Circuit Input 320 ohm
Output 400 ohm
Center Frequency Temperature Coefficient
Maximum Peak RF Input Power
Temperature
Operating
Storage
Case Style
Lid Symbolization (YY=year, WW=week, S=shift)
Sym
CF
www.DataSheet.net/
Notes
10
1
1
1, 10
1, 10
1
1
1
1
1
1
1
1
10
Min Typ Max
456.00
12 14
200
±6.4 ±7.5
±7.5 ±8.8
50 150
8 15
30 55
36 50
36 40
25 35
32 35
30 50
5.1
4.5
-15
13
-40 85
-40 85
SMP-03 5 x 7 mm Nominal Footprint
RFM SF2042B YYWWS
Units
MHz
dB
Ohms
MHz
nsec
dB
dB
pF
pF
kHz/°C
dBm
°C
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50Ω using 50Ω / 200Ω baluns and measured with 50 Ω network analyzer.
2. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance
matching design. See Application Note No. 42 for details.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. Tape and Reel Standard ANSI / EIA 481.
5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
6. US and international patents may apply.
7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
8. ©Copyright 1999, RF Monolithics Inc.
9. Electrostatic Sensitive Device. Observe precautions for handling.
10. The center of the passbands will move with ambient temperature.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
SF2042B-072406
Page 1 of 3
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet SF2042B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SF2042B | SAW Filter | RF Monolithics |
| SF2042C | SAW Filter | RF Monolithics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |