DataSheet26.com

SCA103T PDF даташит

Спецификация SCA103T изготовлена ​​​​«VTI technologies» и имеет функцию, называемую «Inclinometer».

Детали детали

Номер произв SCA103T
Описание Inclinometer
Производители VTI technologies
логотип VTI technologies логотип 

2 Pages
scroll

No Preview Available !

SCA103T Даташит, Описание, Даташиты
SCA103T Series
Inclinometer
Preliminary
FEATURES
• High sensitivity by differential analog output or digital
output via SPI. Single ended signal available by using a
differential amplifier or digitally using internal 11 bit digital
output and external micro controller.
• Available ranges ±15°,±30°
• Over damped frequency response (-3dB @ 8...28 Hz)
• Integrated temperature sensor, accessible via SPI
• Digitally activated electrostatic sensing element self test
• Continuous memory parity check
• Advanced internal and external connection failure detection
• Single +5V supply; ratiometric analog voltage outputs
• Serial Peripheral Interface (SPI) compatible digital output
• DIL-12 plastic SMD package, lead-free reflow solderable
BENEFITS
• High immunity to external interference and noise
supply voltage.
• Improved temperature dependency and long term
stability
• Excellent reliability and stability over time and
temperature
• Instrumentation grade performance
• High resolution and low noise
• Wide operating temperature range
• Outstanding overload and shock durability
APPLICATIONS
• Single axis inclination instruments
• Inclination based position measurement
ELECTRICAL CHARACTERISTICS
Electrical characteristics Condition
Min Typ Max Units
Supply voltage Vdd (1
Current consumption
Analog resistive output load
Analog capacitive output load
Digital output load
SPI clock frequency
AD conversion time
Data transfer time
4.75 5.0 5.25
V
Vdd = 5 V; No load
4 5 mA
Vout to Vdd or Vss
10
kOhm
20 nF
@ 500kHz clock
1 nF
500 kHz
150 µs
@500 kHz clock
38 µs
PERFORMANCE CHARACTERISTICS
D/S
Performance
characteristics
D Measuring range (2
D Measuring direction (3
Condition
Nominal
Mounting plane horizontal
SCA103T-D04
±15
±0.26
Horizontal
SCA103T-D05
±30
±0.5
Horizontal
Units
°
g
S Zero point (4
D Sensitivity
S Offset calibration accuracy (6a, 13
D Offset temperature dependency (6b, 13
D
D
S Sensitivity calibration accuracy (7a, 13
Mounting position
@ room temperature
@ room temperature
0...70°C
-25…85°C
-40…125°C
@ room temperature
Vdd/2
280(15
16(5a
0.057
±1
< ± 0.11
< ±2
< ±0.14
< ±2.5
< ±0.29
< ±5
±0.5
Vdd/2
140(15
8(5b
0.11
±2
< ±0.11
< ±2
< ±0.14
< ±2.5
< ±0.29
< ±5
±0.5
V
mV/°
V/g
°
mg
°
mg
°
mg
°
mg
%
D Sensitivity temperature error (7b, 13
-40...85°C
-1…1 -1…1 %
D
D Typical non-linearity (8
S Cross-axis sensitivity (11
-40…125°C
Over measuring range
@ room temperature
-2.5…1
±T.B.D
±T.B.D
4
-2.5…1
±0.11
±2
4
%
°
mg
%
S Frequency response –3dB (LP) (9
@ room temperature
8…28 8…28 Hz
S Ratiometric error (10
Vdd = 4.75...5.25V
1 1%
D Output noise density (12
D Digital output resolution
D Long term stability (14
From DC...100Hz
Effective Differential
@ steady temp
0.0004
0.009
12
< 0.014
0.0004
0.017
12
< 0.014
°/Hz
°/LSB
Bits
°
Parameters marked as D are measured in differential mode using external differential amplifier. The performance of selected amplifier may have an effect to some parameters.
Differential signal is determined as a Out_diff = Out_1 – Out_2 (pin 11 – pin 5).
VDD = 5.00 V, APPLIES TO BOTH CHANNELS UNLESS OTHERWISE SPECIFIED
Note 1.
Note 2.
Note 3.
Note 4.
Note 5a.
Note 5b.
Note 6a.
Note 6b.
Note 7a.
Note 7b.
For maximum accuracy the supply voltage should be 5 ± 0.05 V.
100nF supply filtering capacitor should be used.
The measuring range is limited by sensitivity, offset and supply voltage rails of the device.
Measuring direction parallel to mounting plane, arrow showing positive direction.
Offset specified as Voffset = Vout(0g) [ V ]. See note 12.
Sensitivity specified as Vsens = {Vout(+0.26g) - Vout(-0.26g)}/0.52 [ V/g ]. See note 12
Sensitivity specified as Vsens = {Vout(+0.5g) - Vout(-0.5g)}/1 [ V/g ]. See note 12
Offset calibration error specified as Offset_Calib_error = {Vout(0g) – Vdd/2} / Vsens [ g ].
Offset temperature error specified as Offset Error @ temp. = {Vout @ temp. – Vout @ room temp.}
/ Vsens [ g ]
Vsens = Nominal sensitivity. See note 12.
Sensitivity calibration error specified as Sensitivity_calibr_error = { Vsens - Vsens_nom} /
Vsens_nom x 100% [%] Vsens_nom = nominal sensitivity
Sensitivity temperature error specified as Sensitivity error @ temp = { [Vsens @ temp –Vsens @
room temp] / Vsens @ room temp x 100% [ % ]. See note 12.
Note 8.
Note 9.
Note 10.
From straight line through sensitivity calibration points.
The output has true DC (0Hz) response.
The ratiometric error is specified as:
Note 11.
Note 12.
Note 13.
Note 14.
Note 15.
The cross-axis sensitivity determines how much inclination / acceleration, perpendicular
to the measuring axis, couples to the output. The total cross-axis sensitivity is the geo-
metric sum of the sensitivities of the two axis which are perpendicular to the measuring
axis.
In addition, supply voltage noise couples to the output due to the ratiometric nature of the
accelerometer.
Factory calibration value.
Power continuously connected.
Is valid between angles 0° to 1°.
Rev. 6 Apr 2005
VTI Technologies reserves the right to modify this specification without prior to notice.
Free Datasheet http://www.datasheet4u.com/









No Preview Available !

SCA103T Даташит, Описание, Даташиты
ABSOLUTE MAXIMUM RATINGS
Parameter
Value
Acceleration (powered or non powered) 20 000
Supply voltage
-0.3 V to +5.5 V
Voltage at input/output pins
Temperature range
-0.3 V to (Vdd+0.3V)
-55…125
Unit
g
V
V
°C
ELECTRICAL CONNECTION
Pin#
1
2
3
4
5
6
7
8
9
10
11
12
Pin Name
SCK
Ext_C_1
MISO
MOSI
Out_2
VSS
CSB
Ext_C_2
ST_2
ST_1
Out_1
VDD
I/O
Input
Input
Output
Input
Output
Power
Input
Input
Input
Input
Output
Power
Connection
Serial clock
Channel 1 external capacitor input
Master in slave out; data output
Master out slave in; data input
Channel 2 output
Negative supply voltage (VSS)
Chip select (active low)
Channel 2 external capacitor input
Self test input for Channel 2
Self test input for Channel 1
Channel 1 output
Positive supply voltage (VDD)
SCA103T Series
If The SPI interface is not used SCK (pin1), MISO (pin3), MOSI (pin4)
and CSB (pin7) must be left floating.
Self test can be activated applying logic “1” (positive supply voltage
level) to ST pins (pins 9 & 10). If ST feature is not used, then pins 9 & 10
must be left floating or connected to GND.
DIMENSIONS
The part weights < 1.2 g. The size is approximately 9 x 5 x 16 mm (w x h x l). Pin pitch is standard 100 mils.
PCB PAD LAYOUTS
103T
APPLICATION EXAMPLE
Single ended output can be formed from differential outputs by using external differential amplifier.
5,0000
4,0000
3,0000
2,0000
1,0000
0,0000
-1,0000
-2,0000
-3,0000
-4,0000
-5,0000
-40
Typical output characteristics
Out 2 Out 1
Differential output
-30 -20 -10 0 10 20 30
Angle [°]
40
+5V +15V
100nF
OUT 2
1
2
3
4
5
6
SCA103T
12
11 OUT 1
10
9
8
100nF
7
5k11
INA114 7 1 5
5k11
2–
3+
48
6
A1
10n 10n
OUTPUT
100nF
−15V
VTI Technologies Oy
Myllynkivenkuja 6
P.O. Box 27
FI-01621 Vantaa
Finland
Tel. +358 9 879181
Fax +358 9 87918791
sales@vti.fi
VTI Technologies Oy
Frankfurt Branch
Rennbahnstr. 72-74
D-60528 Frankfurt am Main
Germany
Tel. +49 69 6786 880
Fax +49 69 6786 8829
sales.de@vti.fi
VTI Technologies, Inc.
One Park Lane Blvd.
Suite 804 - East Tower
Dearborn, MI 48126
USA
Tel. +1 313 425 0850
Fax +1 313 425 0860
Free Datasheet http://www.datasheet4u.com/










Скачать PDF:

[ SCA103T.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SCA103TSCA103TETC
ETC
SCA103TInclinometerVTI technologies
VTI technologies
SCA103TDIFFERENTIAL INCLINOMETERMurata
Murata

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск