DataSheet26.com

OPB200 PDF даташит

Спецификация OPB200 изготовлена ​​​​«OPTEK» и имеет функцию, называемую «Slotted Optical Switch».

Детали детали

Номер произв OPB200
Описание Slotted Optical Switch
Производители OPTEK
логотип OPTEK логотип 

3 Pages
scroll

No Preview Available !

OPB200 Даташит, Описание, Даташиты
Slotted Optical Switch
OPB200
Features:
x Housing material Opaque to visible and infrared light
x Non–contact switching
x Printed PCBoard mount
x 0.200” (5.1 mm) slot width, 0.320” (8.1 mm) slot depth
Product Photo Here
Description:
The OPB200 contains an Infrared LED (890 nm) and a Phototransistor paired in a plastic housing.
The housing is an opaque grade of injection-molded plastic, which minimizes the assembly’s sensitivity to visible
and near-infrared radiation. Each device has approximately 0.060” [1.52 mm] diameter lenses providing the
versatility necessary for general switching applications.
The output Phototransistor ON state conducts current (IC(ON)) when no object is in the slot. The output switches to
the OFF state when a device interrupts the light beam from the Emitter (LED) to the Phototransistor. The
Phototransistor can acknowledge light between 400 nm and 1100 nm with optimum response in the 880 nm range.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
x Non-contact interruptive object sensing
x Assembly line automation
x Machine automation
x Equipment security
x Machine safety
14
Pin #
1
2
3
4
Description
Anode
Cathode
Collector
Emitter
23
Part
Number
OPB200
LED Peak
Wavelength
890 nm
Ordering Information
Sensor
Transistor
Slot Width / Depth
0.200” / 0.320”
Aperture
Emitter/Sensor
None
Lead Length /
Spacing
0.425” / 0.400
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A .3 01/06
Page 1 of 3
Free Datasheet http://www.datasheet4u.com/









No Preview Available !

OPB200 Даташит, Описание, Даташиты
Slotted Optical Switch
OPB200
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage & Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](1)
Input Diode
Forward DC Current
Peak Forward Current (1 s pulse width, 300 pps)
Reverse DC Voltage
Power Dissipation(2)
Output Phototransistor
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector DC Current
Power Dissipation(2)
-40°C to +85°C
260°C
50 mA
3A
2V
100 mW
30 V
5V
30 mA
100 mW
Electrical Characteristics (TA = 25rC unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode (see OP140 for additional information)
VF Forward Voltage
- - 1.7 V IF = 20 mA
IR Reverse Current
- - 100 µA VR = 2 V
Output Phototransistor (see OP550 for additional information)
V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 1 mA
V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA
ICEO Collector Dark Current
- - 100 nA VCE = 10 V, IF = 0, EE = 0
Combined
VCE(SAT)
IC(ON)
Collector-Emitter Saturation Voltage
On-State Collector Current
- - 0.4 V IC = 100 µA, IF = 20 mA
1 4 6 mA VCE = 0.4 V, IF = 20 mA
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.67 mW/°C above 25 °C.
(3) All parameters tested using pulse techniques.
(4) Lead spacing of 0.400” (10.16 mm). Leads are a minimum of 0.020” sq. (0.508 mm) and 0.425” (10.795 mm) long.
(5) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
ketones.
(6) Polarity is denoted by a notch next to pin 1 (LED Anode) of the package.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3 01/06
Page 2 of 3
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Free Datasheet http://www.datasheet4u.com/









No Preview Available !

OPB200 Даташит, Описание, Даташиты
Slotted Optical Switch
OPB200
OPB200 - Flag Next to Emitter
1.20
1.00
0.80
0.60
0.40
0.20
0.00
0.00
Right to Left
Left to Right
Top to Bottom
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OPB200 - Flag Next to Sensor
1.20
1.00
0.80
0.60
0.40
0.20
0.00
0.00
Right to Left
Left to Right
Top to Bottom
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OPB200 - Flag in Middle of Slot
1.20
1.00
0.80
0.60
0.40
0.20
0.00
0.00
Right to Left
Left to Right
Top to Bottom
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
Mech
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A .3 01/06
Page 3 of 3
Free Datasheet http://www.datasheet4u.com/










Скачать PDF:

[ OPB200.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OPB200Slotted Optical SwitchOPTEK
OPTEK
OPB202Slotted Optical SwitchOPTEK
OPTEK

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск