DataSheet26.com

S70FL256P PDF даташит

Спецификация S70FL256P изготовлена ​​​​«SPANSION» и имеет функцию, называемую «256-Mbit CMOS 3.0 Volt Flash Memory».

Детали детали

Номер произв S70FL256P
Описание 256-Mbit CMOS 3.0 Volt Flash Memory
Производители SPANSION
логотип SPANSION логотип 

19 Pages
scroll

No Preview Available !

S70FL256P Даташит, Описание, Даташиты
S70FL256P
256-Mbit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus
Data Sheet
S70FL256P Cover Sheet
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions.
Publication Number S70FL256P_00
Revision 05
Issue Date January 30, 2013









No Preview Available !

S70FL256P Даташит, Описание, Даташиты
Data Sheet
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
2
S70FL256P
S70FL256P_00_05 January 30, 2013









No Preview Available !

S70FL256P Даташит, Описание, Даташиты
S70FL256P
256-Mbit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus
Data Sheet
Distinctive Characteristics
Architectural Advantages
Single power supply operation
– Full voltage range: 2.7 to 3.6V read and write operations
Memory architecture
– Uniform 64 kB sectors
– Top or bottom parameter block (Two 64-kB sectors broken down
into sixteen 4-kB sub-sectors each) for each Flash die
– Uniform 256 kB sectors (no 4-kB sub-sectors)
– 256-byte page size
Program
– Page Program (up to 256 bytes) in 1.5 ms (typical)
– Program operations are on a page by page basis
– Accelerated programming mode via 9V W#/ACC pin
– Quad Page Programming
Erase
– Bulk erase function for each Flash die
– Sector erase (SE) command (D8h) for 64 kB and 256 kB sectors
– Sub-sector erase (P4E) command (20h) for 4 kB sectors
(for uniform 64-kB sector device only)
– Sub-sector erase (P8E) command (40h) for 8 kB sectors
(for uniform 64-kB sector device only)
Cycling endurance
– 100,000 cycles per sector typical
Data retention
– 20 years typical
Device ID
– JEDEC standard two-byte electronic signature
– RES command one-byte electronic signature for backward
compatibility
One time programmable (OTP) area on each Flash die for
permanent, secure identification; can be programmed and
locked at the factory or by the customer
CFI (Common Flash Interface) compliant: allows host system
to identify and accommodate multiple flash devices
Process technology
– Manufactured on 0.09 µm MirrorBit® process technology
Package option
– Industry Standard Pinouts
– 16-pin SO package (300 mils)
– 24-ball BGA (6 x 8 mm) package, 5 x 5 pin configuration
Performance Characteristics
Speed
– Normal READ (Serial): 40 MHz clock rate
– FAST_READ (Serial): 104 MHz clock rate (maximum)
– DUAL I/O FAST_READ: 80 MHz clock rate or
20 MB/s effective data rate
– QUAD I/O FAST_READ: 80 MHz clock rate or
40 MB/s effective data rate
Power saving standby mode
– Standby Mode 160 µA (typical)
– Deep Power-Down Mode 6 µA (typical)
Memory Protection Features
Memory protection
– W#/ACC pin works in conjunction with Status Register Bits to
protect specified memory areas
– Status Register Block Protection bits (BP2, BP1, BP0) in status
General Description
This document contains information for the S70FL256P device, which is a dual die stack of two S25FL129P die. For detailed
specifications, please refer to the discrete die data sheet:
Document
S25FL129P Data Sheet
Publication Identification Number (PID)
S25FL129P_00
Publication Number S70FL256P_00
Revision 05
Issue Date January 30, 2013










Скачать PDF:

[ S70FL256P.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S70FL256P256-Mbit CMOS 3.0 Volt Flash MemorySPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск