DataSheet.es    


PDF NTS0102-Q100 Data sheet ( Hoja de datos )

Número de pieza NTS0102-Q100
Descripción Dual supply translating transceiver
Fabricantes NXP Semiconductors　
Logotipo NXP Semiconductors Logotipo



Hay una vista previa y un enlace de descarga de NTS0102-Q100 (archivo pdf) en la parte inferior de esta página.


Total 21 Páginas

No Preview Available ! NTS0102-Q100 Hoja de datos, Descripción, Manual

NTS0102-Q100
Dual supply translating transceiver; open drain; auto
direction sensing
Rev. 1 — 27 February 2013
Product data sheet
1. General description
The NTS0102-Q100 is a 2-bit, dual supply translating transceiver with auto direction
sensing, that enables bidirectional voltage level translation. It features two 2-bit
input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A)
and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B)
can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for
translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and
OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE
causes the outputs to assume a high-impedance OFF-state. This device is fully specified
for partial power-down applications using IOFF. The IOFF circuitry disables the output,
preventing the damaging backflow current through the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Wide supply voltage range:
VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
Maximum data rates:
Push-pull: 50 Mbps
IOFF circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
ESD protection:
MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port
MIL-STD-883, method 3015 Class 3B exceeds 8000 V for B port
HBM JESD22-A114E Class 2 exceeds 2500 V for A port
HBM JESD22-A114E Class 3B exceeds 8000 V for B port
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
Free Datasheet http://www.datasheet4u.com/

1 page




NTS0102-Q100 pdf
NXP Semiconductors
NTS0102-Q100
Dual supply translating transceiver; open drain; auto direction sensing
11. Static characteristics
Table 7. Typical static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); Tamb = 25 C.
Symbol Parameter
Conditions
Min Typ
II input leakage OE input; VI = 0 V to 3.6 V; VCC(A) = 1.65 V to 3.6 V;
current
VCC(B) = 2.3 V to 5.5 V
--
IOZ OFF-state output A or B port; VO = 0 V or VCCO; VCC(A) = 1.65 V to 3.6 V; [1] - -
current
VCC(B) = 2.3 V to 5.5 V
IOFF power-off
A port; VI or VO = 0 V to 3.6 V;
leakage current VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V
--
B port; VI or VO = 0 V to 5.5 V;
VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V
--
CI input
OE input; VCC(A) = 3.3 V; VCC(B) = 3.3 V
capacitance
-1
CI/O input/output
capacitance
A port
B port
A or B port; VCC(A) = 3.3 V; VCC(B) = 3.3 V
-5
- 8.5
- 11
[1] VCCO is the supply voltage associated with the output.
Max Unit
1 A
1 A
1 A
1 A
- pF
- pF
- pF
- pF
Table 8. Typical supply current
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); Tamb = 25 C.
VCC(A)
VCC(B)
2.5 V
3.3 V
5.0 V
1.8 V
ICC(A)
0.1
ICC(B)
0.5
ICC(A)
0.1
ICC(B)
1.5
ICC(A)
0.1
ICC(B)
4.6
2.5 V
0.1
0.1
0.1
0.8
0.1
3.8
3.3 V
-
- 0.1 0.1 0.1 2.8
Unit
A
A
A
Table 9. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions
40 C to +85 C
Min Max
VIH HIGH-level A port
input voltage
VCC(A) = 1.65 V to 1.95 V;
VCC(B) = 2.3 V to 5.5 V
VCC(A) = 2.3 V to 3.6 V;
VCC(B) = 2.3 V to 5.5 V
B port
[1] VCCI 0.2
[1] VCCI 0.4
-
-
VCC(A) = 1.65 V to 3.6 V;
VCC(B) = 2.3 V to 5.5 V
OE input
[1] VCCI 0.4
-
VCC(A) = 1.65 V to 3.6 V;
VCC(B) = 2.3 V to 5.5 V
0.65VCC(A)
-
40 C to +125 C
Min Max
Unit
VCCI 0.2
VCCI 0.4
-V
-V
VCCI 0.4
-V
0.65VCC(A)
-V
NTS0102-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 27 February 2013
© NXP B.V. 2013. All rights reserved.
5 of 21
Free Datasheet http://w

5 Page





NTS0102-Q100 arduino
NXP Semiconductors
13. Waveforms
NTS0102-Q100
Dual supply translating transceiver; open drain; auto direction sensing
VI
An, Bn
input
GND
VOH
Bn, An
output
VOL
VM
90 %
tPHL
VM
10 %
tTHL
tPLH
tTLH
001aal918
Fig 4.
Measurement points are given in Table 12.
VOL and VOH are typical output voltage levels that occur with the output load.
The data input (An, Bn) to data output (Bn, An) propagation delay times
OE input
VI
GND
output
VCCO
LOW-to-OFF
OFF-to-LOW
VOL
output
HIGH-to-OFF
OFF-to-HIGH
VOH
GND
VM
tPLZ
tPHZ
VX
VY
tPZL
VM
tPZH
VM
outputs
enabled
outputs
disabled
outputs
enabled
001aal919
Fig 5.
Measurement points are given in Table 12.
VOL and VOH are typical output voltage levels that occur with the output load.
Enable and disable times
Table 12. Measurement points[1][2]
Supply voltage
Input
VCCO
1.8 V 0.15 V
2.5 V 0.2 V
3.3 V 0.3 V
5.0 V 0.5 V
VM
0.5VCCI
0.5VCCI
0.5VCCI
0.5VCCI
Output
VM
0.5VCCO
0.5VCCO
0.5VCCO
0.5VCCO
[1] VCCI is the supply voltage associated with the input.
[2] VCCO is the supply voltage associated with the output.
VX
VOL + 0.15 V
VOL + 0.15 V
VOL + 0.3 V
VOL + 0.3 V
NTS0102-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 27 February 2013
VY
VOH 0.15 V
VOH 0.15 V
VOH 0.3 V
VOH 0.3 V
© NXP B.V. 2013. All rights reserved.
11 of 21
Free Datasheet http://www.datasheet4u.com/

11 Page







PáginasTotal 21 Páginas
PDF Descargar[ Datasheet NTS0102-Q100.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
NTS0102-Q100Dual supply translating transceiverNXP Semiconductors
NXP Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar