DataSheet26.com

S1C17002 PDF даташит

Спецификация S1C17002 изготовлена ​​​​«Epson» и имеет функцию, называемую «16-bit Single chip Microcontroller».

Детали детали

Номер произв S1C17002
Описание 16-bit Single chip Microcontroller
Производители Epson
логотип Epson логотип 

4 Pages
scroll

No Preview Available !

S1C17002 Даташит, Описание, Даташиты
S1C17002
Low Power 16-bit Single Chip Microcontroller
Low power MCU (Operating voltage 1.8VPower consumption SLEEP 0.5 uA,
HALT 3.3 mA)
High code density and high processing power 16bitRISC C17CPU, optimize
to C, serial ICE
128KB ROM, 8KB RAM
10-bit ADC
Infrared Remote Controller Circuit
„ DESCRIPTIONS
The S1C17002 is a cost effective, high performance and compact 16-bit RISC application specific controller (ASC).
It is suitable for various products that require analog inputs and interfaces for connection, such as healthcare goods, sensor
systems, alarms, home electric appliance (rice cookers, microwave ovens and remote controllers).
The S1C17002 consists of a S1C17 16-bit compact RISC CPU Core, a 128K-byte ROM, an 8K-byte RAM, a 10-bit ADC with
four analog input channels, a 16-bit multi-function timer, an infrared remote controller, serial interfaces (UART with IrDA 1.0,
SPI and I2C), an RTC, 16-bit and 8-bit timers, a watchdog timer, and GPIO ports.
The S1C17002 provides a 16 bits × 16 bits + 32 bits MAC (multiply and accumulate) and 16 bits ÷ 16 bits division functions
to implement a DSP function.
The S1C17002 has adopted the EPSON SoC (System on Chip) design technology using 0.18 μm mixed analog low power
CMOS process.
„ FEATURES
CPU
Seiko Epson original 16-bit RISC processor S1C17 Core
Internal 3-stage pipeline
Instruction set
- 16-bit fixed length
- 111 basic instructions (184 including variations)
- Compact and fast instruction set optimized for development in C language
Registers
- Eight 24-bit general-purpose registers
- Three special registers (24-bit × 2, 8-bit × 1)
Memory space
- Up to 16M bytes accessible (24-bit address)
Internal Memories
Mask ROM
- 128K bytes
RAM
- 8K bytes
Operating Clock
Main clock
- 20 MHz (max.)
- On-chip oscillator (crystal or ceramic) or external clock input
Sub clock
- 32.768 kHz (typ.) for the RTC, usable as the main clock
- On-chip oscillator (crystal) or external clock input
Interrupt Controller
Four non-maskable interrupts
- Reset (#RESET pin or watchdog timer)
- Address misaligned
- Debug
- NMI (watchdog timer)
29 maskable interrupts
- Port inputs (eight systems)
- 16-bit multi-function timer (one system)
- A/D converter (two systems)
- 16-bit timer of clock generator (one system)
- 8-bit timers of clock generator (three systems)
- UART (one system)
- SPI (one system)
SEIKO EPSON CORPORATION
Free Datasheet http://www.datasheet4u.com/









No Preview Available !

S1C17002 Даташит, Описание, Даташиты
S1C17002
- I2C master (one system)
- I2C slave (two systems)
- RTC (one system)
- 8-bit programmable timers (four systems)
- 8-bit OSC1 timers (two systems)
- Extended SPI (one system)
- Remote controller (one system)
- The interrupt level (priority) of each maskable interrupt system is configurable (levels 0 to 7).
Prescaler
Generates the source clocks for the clock generator.
16-bit Multi-Function Timer
One channel of 16-bit timer/counter with PWM output function is available.
Can generate two compare-match interrupts.
Supports the IGBT output control function using the A/D converter out-of-range signal.
Clock Generator
One channel of 16-bit timer and three channels of 8-bit timers are available.
Can be used as the clock source for the UART, SPI, and I2C master.
Each timer can generate an underflow interrupt.
8-bit Programmable Timers
Four channels of 8-bit timers (presettable down counter) are available.
Can be used as an interval timer to trigger the ADC.
Each timer can generate an underflow interrupt.
8-bit OSC1 Timers
Two channels of 8-bit timers (presettable down counter) that are driven with the OSC1 clock are available.
Each timer can generate an underflow interrupt.
Watchdog Timer
30-bit watchdog timer to generate a reset or an NMI
The watchdog timer overflow period (reset or NMI interrupt period) is programmable.
The watchdog timer overflow signal can be output outside the IC.
RTC
Contains time counters (second, minute, and hour) and calendar counters (day, day of the week, month, and year).
Periodic interrupts are possible.
UART
One channel of UART is available.
Supports IrDA 1.0 interface.
Two-byte receive data buffer and one-byte transmit buffer are built in to support full-duplex communication.
Transfer rate: 150 to 460800 bps, character length: seven or eight bits, parity mode: even, odd, or no parity, stop bit:
one or two bits
Parity error, framing error, and overrun error detectable
Each channel can generate receive buffer full, transmit buffer empty, and receive error interrupts.
SPI
Supports both master and slave modes.
One-byte receive data buffer and one-byte transmit buffer are built in.
Data length: eight bits fixed (MSB first)
Data transfer timing (clock phase and polarity variations) is selectable from among 4 types.
Can generate receive buffer full and transmit buffer empty interrupts.
Extended SPI
Supports both master and slave modes.
One-byte receive data buffer and one-byte transmit buffer are built in.
Data length: eight bits fixed (MSB first)
Data transfer timing (clock phase and polarity variations) is selectable from among 4 types.
Can generate receive buffer full and transmit buffer empty interrupts.
Exclusive clock source is available.
I2C Master
Data format: 8 bits (MSB first)
Addressing mode: 7-bit addressing (10-bit addressing is not supported.)
Incorporates a noise rejector (can be enabled by a register).
Can generate receive buffer full and transmit buffer empty interrupts.
I2C Slave
Data format: 8 bits (MSB first)
Addressing mode: 7-bit addressing (10-bit addressing is not supported.)
Supports a clock stretch function
Incorporates a noise rejector (can be enabled by a register).
Can generate receive, transmit, and bus status interrupts.
2 Seiko Epson Corporation
Free Datasheet http://www.datasheet4u.com/









No Preview Available !

S1C17002 Даташит, Описание, Даташиты
S1C17002
Infrared Remote Controller
Outputs a modulated carrier signal and inputs remote control pulses.
Embedded carrier signal generator and data length counter.
Can generates REMC interrupts.
General-Purpose I/O Ports
Maximum 30 I/O ports and four input ports are available.
Can generate input interrupts from the six ports selected with software.
* The GPIO ports are shared with other peripheral function pins (UART, PWM etc.). Therefore, the number of GPIO
ports depends on the peripheral functions used.
A/D Converter
10-bit A/D converter with up to four analog input ports
Can generates an end of conversion interrupt and an out of range interrupt.
Outputs an out of range signal to the IGBT circuit in the 16-bit multi-function timer module.
Operating Voltage
HVDD (for I/O): 1.65 to 3.60 V
LVDD (for Core): 1.65 to 1.95 V
AVDD (for ADC): 2.70 to 3.60 V (1.65 to 3.60 V*)
* The AVDD voltage range can be changed to 1.65 to 3.60 V only when the ADC is not used and the P0x pins are used
as digital signal input pins, not analog input pins. However, the high and low level input voltages of the digital signals
must be AVDD and GND, respectively.
Operating Temperatures
-40 to 85°C
Current Consumption
During SLEEP: 1.8 μA (typ.) 32 kHz/1.8 V, RTC = On
During HALT: 1.3 mA (typ.) 20 MHz/1.8 V
During execution: 3.8 mA (typ.) 20 MHz/1.8 V
* By controlling the clocks through the Clock-Gear (CMU), power consumption can be reduced.
Shipping Form
TQFP12-64pin (7 mm × 7 mm × 1.2 mm, 0.4 mm pin pitch)
WCSP-48 (3.124 mm × 3.124 mm × 0.78 mm, 0.4 mm ball pitch)
Bare chip
Seiko Epson Corporation
3
Free Datasheet http://www.datasheet4u.com/










Скачать PDF:

[ S1C17002.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S1C1700116-bit Single chip MicrocontrollerEpson
Epson
S1C1700216-bit Single chip MicrocontrollerEpson
Epson
S1C1700316-bit Single chip MicrocontrollerEpson
Epson

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск