DataSheet26.com

HLMP-0401 PDF даташит

Спецификация HLMP-0401 изготовлена ​​​​«Agilent(Hewlett-Packard)» и имеет функцию, называемую «2.5 mm x 7.6 mm Rectangular LED Lamps».

Детали детали

Номер произв HLMP-0401
Описание 2.5 mm x 7.6 mm Rectangular LED Lamps
Производители Agilent(Hewlett-Packard)
логотип Agilent(Hewlett-Packard) логотип 

4 Pages
scroll

No Preview Available !

HLMP-0401 Даташит, Описание, Даташиты
H
2.5 mm x 7.6 mm Rectangular
LED Lamps
Technical Data
HLMP-R100
HLMP-0300/0301
HLMP-0400/0401
HLMP-0503/0504
Features
• Rectangular Light Emitting
Surface
• Flat High Sterance Emitting
Surface
• Stackable on 2.54 mm (0.100
inch) Centers
• Ideal as Flush Mounted
Panel Indicators
• Ideal for Backlighting
Legends
• Long Life: Solid State
Reliability
• Choice of 4 Bright Colors
DH AS AlGaAs Red
High Efficiency Red
Yellow
High Performance Green
• IC Compatible/Low Current
Requirements
Description
The HLMP–R100, -030X, -040X,
-050X are solid state lamps
encapsulated in a radial lead
rectangular epoxy package. They
utilize a tinted, diffused epoxy to
provide high on-off contrast and a
flat high intensity emitting
surface. Borderless package
design allows creation of
uninterrupted light emitting areas.
The HLMP-R100 uses a double
heterojunction (DH) absorbing
substrate (AS) aluminum gallium
arsenide (AlGaAs) red LED chip
in a light red epoxy package. This
combination produces
outstanding light output over a
wide range of drive currents.
The HLMP-0300 and -0301 have a
high efficiency red GaAsP on GaP
LED chip in a light red epoxy
package.
The HLMP-0400 and -0401
provide a yellow GaAsP on GaP
LED chip in a yellow epoxy
package.
Package Dimensions
The HLMP-0503 and -0504
provide a green GaP LED chip in
a green epoxy package.
5964-9378E
1-149









No Preview Available !

HLMP-0401 Даташит, Описание, Даташиты
Axial Luminous Intensity
Color
DH AlGaAs Red
High
Efficiency
Red
Yellow
High
Performance
Green
Part
Number
HLMP-R100
HLMP-0300
HLMP-0301
HLMP-0400
HLMP-0401
HLMP-0503
HLMP-0504
Iv (mcd) @
20 mA DC
Min. Typ.
3.4 11.0
1.3 2.5
2.1 5.3
1.4 2.5
3.6 5.0
1.6 2.5
2.6 8.0
Absolute Maximum Ratings at TA = 25°C
Parameter
HLMP-
R100
HLMP-
HLMP-
0300/-0301 0400/0401
HLMP-
0503/-0504
Units
Peak Forward Current
300 90
60
90 mA
Average Forward Current[1]
20 25
20
25 mA
DC Current[2]
30 30
20
30 mA
Power Dissipation
Reverse Voltage (IR = 100 µA)
Transient Forward Current[3] (10 µs Pulse)
87
5
500
135
5
500
85
5
500
135 mW
5V
500 mA
Operating Temperature Range
Storage Temperature Range
-20 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
-20 to
+100
-55 to
+100
°C
Lead Soldering Temperature
(1.6 mm [0.063 in.] from body)
260°C for 5 seconds
Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. For AlGaAs Red, Red, and Green Series derate linearly from 50°C at 0.5 mA/°C. For Yellow Series derate linearly from 50°C at
0.2 mA/°C.
3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak current beyond the peak forward current listed in the
Absolute Maximum Ratings.
1-150









No Preview Available !

HLMP-0401 Даташит, Описание, Даташиты
Electrical/Optical Characteristics at TA = 25°C
HLMP-R100
HLMP
-0300/-0301
HLMP
-0400/-0401
HLMP
-0503/-0504
Sym. Description Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Test
Conditions
2θ1/2 Included Angle
Between Half
Luminous 100 100 100 100 Deg. Note 1. Fig. 6
Intensity
Points
λP Peak
645 635 583 565 nm Measurement
Wavelength
at Peak
λd Dominant 637 626 585 569 nm Note 2
Wavelength
∆λ1/2 Spectral Line
20
40
36
28 nm
Halfwidth
τs Speed of 30 90 90 500 ns
Response
C Capacitance
30
16
18
18 pF VF = 0;
f = 1 MHz
RθJ-PIN Thermal
260 260 260 260 °C/W Junction to
Resistance
Cathode Lead
V Forward
F
Voltage
1.8 2.2
1.9 2.6
2.1 2.6
2.2 3.0 V I = 20 mA
F
Figure 2.
V Reverse
5.0
5.0
5.0
5.0
R
Breakdown
Voltage
V
I
R
=
100
µA
ηv Luminous 80 145 500 595 lm/W Note 3
Efficacy
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv
is the luminous efficacy in lumens/watt.
Figure 1. Relative Intensity vs. Wavelength.
1-151










Скачать PDF:

[ HLMP-0401.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HLMP-0400RECTANCULAR SOLID STATE LAMPSQT Optoelectronics
QT Optoelectronics
HLMP-04002.5 mm x 7.6 mm Rectangular LED LampsAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMP-0401RECTANCULAR SOLID STATE LAMPSQT Optoelectronics
QT Optoelectronics
HLMP-04012.5 mm x 7.6 mm Rectangular LED LampsAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск