DataSheet26.com

HLMP-0800 PDF даташит

Спецификация HLMP-0800 изготовлена ​​​​«Agilent(Hewlett-Packard)» и имеет функцию, называемую «T-13/4/ 2 mm X 5 mm Rectangular Bicolor LED Lamps High Efficiency Red/ High Performance Green».

Детали детали

Номер произв HLMP-0800
Описание T-13/4/ 2 mm X 5 mm Rectangular Bicolor LED Lamps High Efficiency Red/ High Performance Green
Производители Agilent(Hewlett-Packard)
логотип Agilent(Hewlett-Packard) логотип 

4 Pages
scroll

No Preview Available !

HLMP-0800 Даташит, Описание, Даташиты
H
T-13/4, 2 mm X 5 mm Rectangular
Bicolor LED Lamps
High Efficiency Red/
High Performance Green
Technical Data
HLMP-4000
HLMP-0800
Features:
• Two Color (Red, Green)
Operation
• (Other Two LED Color
Combinations Available)
• Three Leads with One
Common Cathode
• Option of Straight or Spread
Lead Configurations
• Diffused, Wide Visibility
Lens
Description
The T-1 3/4 HLMP-4000 and
2 mm by 5 mm rectangular
HLMP-0800 are three leaded
bicolor light sources designed for
a variety of applications where
dual state illumination is required
in the same package. There are
two LED chips, high efficiency
red (HER), and high performance
green (Green), mounted on a
central common cathode lead for
maximum on-axis viewability.
Colors between HER and Green
can be generated by
independently pulse width
modulating the LED chips.
Other Bicolor
Combinations
Other bicolor combinations are
available:
• HER/yellow
• HER/green
• DH AlGaAs red/green.
Contact your local Hewlett-
Packard Components Field Sales
representative for details.
Package Dimensions
HLMP-4000
HLMP-0800
5964-9363E
1-157









No Preview Available !

HLMP-0800 Даташит, Описание, Даташиты
Package Dimensions, continued
5.08 (0.200)
4.57 (0.180)
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
20.32
(0.800)
MIN.
COMMON
CATHODE
0.508 SQUARE
(0.020) NOMINAL
2.23 (0.088)
1.98 (0.078)
8.00 (0.315)
7.37 (0.290)
2.41 (0.095)
2.03 (0.085)
20.32
(0.800)
MIN.
SIDE VIEW
5.18 (0.204)
4.93 (0.194)
5.46 (0.215)
4.98 (0.196)
COMMON
CATHODE
0.508 SQUARE
(0.020) NOMINAL
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± 0.25
(0.100 ± 0.010)
GREEN
ANODE
FLAT INDICATES
RED ANODE
RED ANODE
(SHORT LEAD)
COMMON CATHODE
6.10 (0.240)
5.59 (0.220)
GREEN
ANODE
RED ANODE
(SHORT LEAD)
COMMON CATHODE
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 MM (0.040") DOWN THE LEADS.
Absolute Maximum Ratings at TA = 25°C
Parameter
High Efficiency
Red/Green
Units
Peak Forward Current
Average Forward Current[1,2] (Total)
DC Current[2,4] (Total)
Power Dissipation[3,5] (Total)
90 mA
25 mA
30 mA
135 mW
Operating Temperature Range
Storage Temperature Range
Reverse Voltage (IR = 100 µA)
Transient Forward Current[6]
(10 µsec Pulse)
Lead Soldering Temperature
[1.6 mm (0.063 in.) below
seating plane]
-20 to +85
-55 to +100
5
500
°C
V
mA
260°C for 5 seconds
Notes:
1. See Figure 5 to establish pulsed operating conditions.
2. The combined simultaneous current must not exceed the maximum.
3. The combined simultaneous power must not exceed the maximum.
4. For HER and Green derate linearly from 50°C at 0.5 mA/°C.
5. For HER and Green derate linearly from 25°C at 1.8 mW/°C.
6. The transient peak current is the maximum non-recurring current that can be applied
to the device without damaging the LED die and wirebond. It is not recommended that
the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
1-158









No Preview Available !

HLMP-0800 Даташит, Описание, Даташиты
Electrical/Optical Characteristics at TA = 25°C
Sym.
Parameter
Red Green
Min. Typ. Max. Min. Typ. Max. Units
Test
Conditions
IV Luminous Intensity
HLMP-4000
HLMP-0800
λPEAK
λd
Peak Wavelength
Dominant
Wavelength[1]
τs Speed of Response
C Capacitance
VF Forward Voltage
VR Reverse Breakdown
Voltage
RθJ-PIN Thermal Resistance
2.1 5
2.1 3.5
635
626
4.2 8
2.6 4.0
565
569
mcd
nm
90 500
11 18
1.9 2.4
2.1 2.7
55
ns
pF
V
V
260 260
°C/W
IF = 10 mA
IF = 20 mA
VF = 0, f = 1 MHz
IF = 10 mA
IR = 100 µA
Junction to
Cathode Lead
2θ 1/2
ηV
Included Angle
Between Half
Luminous
Intensity Points[2]
HLMP-4000
HLMP-0800
Luminous Efficacy[3]
65
100
145
65
Deg.
IF = 10 mA
100 IF = 20 mA
595 Lumen/
Watt
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. Radiant intensity, Ie, in watts steradian, may be found from the equation Ie = Iv/ηv where Iv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/watt.
Figure 1. Relative Intensity vs. Wavelength.
1-159










Скачать PDF:

[ HLMP-0800.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HLMP-0800T-13/4/ 2 mm X 5 mm Rectangular Bicolor LED Lamps High Efficiency Red/ High Performance GreenAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск