|
|
Número de pieza | HFA15PB60 | |
Descripción | Ultrafast/ Soft Recovery Diode | |
Fabricantes | International Rectifier | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HFA15PB60 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Bulletin PD -2.340 rev. A 11/00
HEXFREDTM
Features
• Ultrafast Recovery
• Ultrasoft Recovery
• Very Low IRRM
• Very Low Qrr
• Specified at Operating Conditions
Benefits
• Reduced RFI and EMI
• Reduced Power Loss in Diode and Switching
Transistor
• Higher Frequency Operation
• Reduced Snubbing
• Reduced Parts Count
HFA15PB60
Ultrafast, Soft Recovery Diode
BASE
CATHODE
4
2
1
CATHODE
3
ANODE
2
VR = 600V
VF(typ.)* = 1.3V
IF(AV) = 15A
Qrr (typ.)= 80nC
IRRM (typ.) = 4.0A
trr(typ.) = 19ns
di(rec)M/dt (typ.)* = 160A/µs
Description
International Rectifier's HFA15PB60 is a state of the art ultra fast recovery
diode. Employing the latest in epitaxial construction and advanced processing
techniques it features a superb combination of characteristics which result in
performance which is unsurpassed by any rectifier previously available. With
basic ratings of 600 volts and 15 amps continuous current, the HFA15PB60 is
especially well suited for use as the companion diode for IGBTs and MOSFETs.
In addition to ultra fast recovery time, the HEXFRED product line features
extremely low values of peak recovery current (IRRM) and does not exhibit any
tendency to "snap-off" during the tb portion of recovery. The HEXFRED features
combine to offer designers a rectifier with lower noise and significantly lower
switching losses in both the diode and the switching transistor. These HEXFRED
advantages can help to significantly reduce snubbing, component count and
heatsink sizes. The HEXFRED HFA15PB60 is ideally suited for applications in
power supplies and power conversion systems (such as inverters), motor
drives, and many other similar applications where high speed, high efficiency
is needed.
TO-247AC (Modified)
Absolute Maximum Ratings
VR
IF @ TC = 100°C
IFSM
IFRM
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
* 125°C
Parameter
Cathode-to-Anode Voltage
Continuous Forward Current
Single Pulse Forward Current
Maximum Repetitive Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max
600
15
150
60
74
29
-55 to +150
Units
V
A
W
C
1
1 page HFA15PB60
Bulletin PD-2.340 rev. A 11/00
REVERSE RECOVERY CIRCUIT
VR = 200V
L = 70µH
0.01 Ω
D.U.T.
dif/dt
ADJUST G
D
IRFP250
S
IF
0
3
trr
ta
tb
2 I RRM
Qrr 4
0.5 I RRM
di(rec)M/dt
5
0.75 IRRM
1 dif /dt
1. dif/dt - Rate of change of current
through zero crossing
2. IRRM - Peak reverse recovery current
3. trr - Reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current
4. Qrr - Area under curve defined by trr
and IRRM
trr X IRRM
Qrr =
2
5. di(rec)M/dt - Peak rate of change of
current during tb portion of trr
Fig. 9 - Reverse Recovery Parameter Test
Circuit
Fig. 10 - Reverse Recovery Waveform and
Definitions
www.irf.com
5
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HFA15PB60.PDF ] |
Número de pieza | Descripción | Fabricantes |
HFA15PB60 | Ultrafast/ Soft Recovery Diode | International Rectifier |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |