|
|
PDF ACNM7112 Data sheet ( Hoja de datos )
| Número de pieza | ACNM7112 | |
| Descripción | MIDDLE LOAD RELAY | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ACNM7112 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
MIDDLE LOAD RELAY
FOR SMART J/B
CN-M (ACNM)
CN-M RELAYS (ACNM)
New
Compliance with RoHS Directive
FEATURES
1. Best space savings in its class.
2. Compact and high-capacity 30A
load switching.
3. Full line up (High heat-resistant type
and SMD type)
4. Terminals for PC board pattern
designs are easily allocated.
TYPICAL APPLICATIONS
Defogger, Seat heater, Head lamp, Fog
lamp, Fan motor, etc.
ORDERING INFORMATION
ACNM
CN-M relay
Contact arrangement*1
1: 1 Form C
3: 1 Form A
5: 1 Form C high heat-resistant type
7: 1 Form A high heat-resistant type
Pick-up voltage
1: Max. 7.2V DC
Coil voltage (DC)
12: 12V
Terminal shape
Nil: PC board terminal
SA: Surface-mount terminal
Packing style*2
Nil: Tube packing
X: Tape and reel packing
(Reverse NO terminal direction in pull-out direction)
Z: Tape and reel packing
(Normal NO terminal direction in pull-out direction)
Notes: *1. Surface-mount terminal type is available in high heat-resistant type only.
*2. Tube packing: PC board terminal type only
Tape and reel packing: Surface-mount type only
TYPES
1. PC board terminal type
Contact arrangement
Nominal coil voltage
1 Form A
1 Form C
12V DC
Standard packing; Carton (tube): 50 pcs.; Case: 1,500 pcs.
Standard type
ACNM3112
ACNM1112
Part No.
High heat-resistant type
ACNM7112
ACNM5112
2. Surface-mount terminal type
Contact arrangement
Nominal coil voltage
Part No.
High heat-resistant type
1 Form A
1 Form C
12V DC
ACNM7112SAX
ACNM7112SAZ
ACNM5112SAX
ACNM5112SAZ
Standard packing; Carton (tape and reel): 200 pcs.; Case: 600 pcs.
Notes: *1. Surface-mount terminal type is available in high heat-resistant type only.
*2. An “X” at the end of the part number indicates, for tape and reel packing, reverse NO terminal direction in pull-out direction.
A “Z” at the end of the part number indicates, for tape and reel packing, normal NO terminal direction in pull-out direction.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
New
Free Datasheet http://www.datasheet4u.com/
1 page  
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%. However,
check it with the actual circuit since the
characteristics may be slightly different.
2. Coil applied voltage
To ensure proper operation, the voltage
applied to the coil should be the rated
operating voltage of the coil. Also, be
aware that the pick-up and drop-out
voltages will fluctuate depending on the
ambient temperature and operating
conditions.
3. Cycle lifetime
Check this with the real device as it is
affected by coil driving circuit, load type,
activation frequency, activation phase,
ambient conditions and other factors.
4. Soldering
When soldering the relays, ensure
conformance with the conditions listed
below.
1) Automatic soldering
• Preheating: less than 100°C 212°F
(solder target surface of PC board) for
less than 120 sec
• Soldering: less than 260°C 500°F
(solder temperature) for less than 5 sec
(soldering time)
2) Manual soldering
• Soldering tip temperature: less than 280
to 300°C 536 to 572°F
• Soldering iron: 30 to 60 W
• Soldering time: less than 5 sec
5. Usage, transport and storage
conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–40 to +85°C –40 to +185°F
(Standard type)
–40 to +110°C –40 to +230°F
(High heat-resistant type)
(2) Humidity: 2 to 85% RH
(Avoid freezing and condensation.)
(3) Atmospheric pressure: 86 to 106 kPa
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
(Temperature and humidity range for
usage, transport, and storage)
Humidity, %RH
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
temperatures when used at
lower than
temperatures
0°C 32°F) 5
2
higher than
0°C 32°F)
–40 0
85 110
–40 +32
+185 +230
Temperature, °C °F
Humidity, %RH
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
temperatures when used at
lower than
temperatures
0°C 32°F)
higher than
0°C 32°F)
5
–40 0
85
–40 +32
+185
Temperature, °C °F
CN-M (ACNM)
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0°C 32°F. This
causes problems such as sticking of
movable parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
6. Others
If the relay has been dropped, the
appearance and characteristics should
always be checked before use.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Free Datasheet http://www.datasheet4u.com/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet ACNM7112.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ACNM7112 | MIDDLE LOAD RELAY | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |