DataSheet26.com

HFBR-5113 PDF даташит

Спецификация HFBR-5113 изготовлена ​​​​«Agilent(Hewlett-Packard)» и имеет функцию, называемую «Low Cost/ Industry Standard FDDI MIC Transceivers».

Детали детали

Номер произв HFBR-5113
Описание Low Cost/ Industry Standard FDDI MIC Transceivers
Производители Agilent(Hewlett-Packard)
логотип Agilent(Hewlett-Packard) логотип 

15 Pages
scroll

No Preview Available !

HFBR-5113 Даташит, Описание, Даташиты
Low Cost, Industry Standard
FDDI MIC Transceivers
Technical Data
HFBR-5111 (2x11)
HFBR-5112 (Narrow 1x13)
HFBR-5113 (Standard 1x13)
Features
• Full Compliance with the
FDDI PMD Standard
• Full Compliance with the
Optical Performance
Requirements of the ATM
100 Mbps Physical Layer
• Full Compliance with the
Optical Performance
Requirements of the Fast
Ethernet Physical Layer
• Multisourced Package Style
with:
- 2x11 or 1x13 Pin
Configuration
- MIC Receptacle
- Field Changeable Keying
• Wave Solder and Aqueous
Wash Process Compatible
Package
• Internal Shielding for Low
EMI Emissions and High
EMI Immunity
• Single +5V Power Supply
• Shifted ECL Logic Interface
Directly Compatible with
FDDI PHY Circuits
• Manufactured in an ISO
9001 Certified Facility
Applications
• FDDI Concentrators,
Bridges, Routers, and
Network Interface Cards
• 100 Mbps ATM Interfaces
• Fast Ethernet Interfaces
92
• Point-to-Point Data
Communications
• Replaces DLX2012-FD and
DLX2020-FD Model
Transceivers
Description
The HFBR-511X family of trans-
ceivers from Hewlett-Packard
consists of high performance,
cost effective modules for optical
data communication applications
at the 100 Mbps/125 MBd rate.
The transceivers feature full
compliance with the Fiber
Distributed Data Interface (FDDI)
Physical Media Dependent (PMD)
standard. This standard has been
approved as an International
Standard, ISO/IEC 9314-3, and
an American National Standard,
ANSI X3.166 - 1990. The HFBR-
5111 represents the 2x11
package style. The “2x11”
denotes two rows of eleven pins.
The HFBR-5112 and HFBR-5113
represent the Narrow and
Standard 1x13 package styles,
respectively. The “1x13” denotes
one row of thirteen pins.
The modules are designed for 50
or 62.5 µm core multimode
optical fiber and operate at a
nominal wavelength of 1300 nm.
Each transceiver incorporates
our high-performance, reliable,
long-wavelength optical devices
and proven circuit technology to
give long life and consistent
performance.
The transceivers are optimized
for 125 MBd operation but can be
used over a wide range of signal
rates. The transceivers are
guaranteed to meet FDDI PMD
specifications when used within
the operating conditions specified
in this document.
These HFBR-511X Series trans-
ceivers are also useful for both
ATM 100 Mbps interfaces and
Fast Ethernet 100 Base-FX
interfaces. The ATM Forum User-
Network Interface (UNI)
Standard, Version 3.0, defines the
Physical Layer for 100 Mbps
Multimode Fiber Interface for
ATM in Section 2.3 to be the
5964-9019E (2/96)









No Preview Available !

HFBR-5113 Даташит, Описание, Даташиты
FDDI PMD standard. Likewise,
the Fast Ethernet Alliance defines
the Physical Layer for the 100
Base-FX Version of IEEE 802.3u
to be the FDDI PMD standard.
Hewlett-Packard also provides
several other FDDI products
compliant with the FDDI Low
Cost Fiber (LCF) -PMD and
Single Mode (SM) -PMD
standards. These products are
available with ST, SC, and FC
connector styles. They are
available in the 1x9 transceiver
and 14- and 16-pin transmitter/
receiver package styles for those
designs that require these
alternate configurations. Contact
your Hewlett-Packard sales
representative for information on
these alternative FDDI products.
Transmitter Section
The transmitter section of the
HFBR-511X Series utilizes a 1300
nm surface emitting InGaAsP
LED. The LED is packaged in the
optical subassembly portion of
the transmitter section. It is dc-
coupled to a custom IC which
converts differential-input, PECL
logic signals, ECL referenced
(shifted) to a +5 V power supply,
into an analog LED drive current.
differential. Also, both Data and
Signal Detect outputs are PECL
compatible, ECL referenced
(shifted) to a +5 V power supply.
Package
The overall package concept for
the HP transceiver consists of the
following basic elements: two
optical subassemblies, an
electrical subassembly, and the
housing with full compliance to
the FDDI PMD standard. A block
diagram is illustrated in Figure 1.
The package outline drawings
and pin-outs are shown in Figures
2 and 3. These are compliant with
the industry standard 2x11 and
1x13 pin configurations.
The optical subassemblies utilize
a high-volume assembly process
together with low-cost lens
elements which result in a cost-
effective building block.
The electrical subassemblies
consist of a high-volume, multi-
layer printed circuit board on
which the IC chips and various
surface-mounted passive circuit
elements are attached.
Each transceiver package
includes internal shields for the
electrical and optical subassem-
blies to ensure low EMI emissions
and high immunity to external
EMI fields.
The outer housings including the
MIC receptacles are molded of
filled non-conductive plastic to
provide mechanical strength and
electrical isolation. The solder
posts of each package design are
isolated from the circuit design of
the transceiver and do not require
connection to a ground plane on
the circuit board.
Each transceiver is attached to its
printed circuit boards with the
2x11 or 1x13 signal pins and the
solder posts which exit the
bottom of the housing. The solder
posts provide the primary
mechanical strength to withstand
the loads imposed on the
transceiver when mating with
MIC-connectored fiber cables.
Application Information
The Applications Engineering
group of the Optical Communica-
tion Division is available to assist
you with the technical under
Receiver Section
The receiver section of the
HFBR-511X Series utilizes an
InGaAs PIN photodiode coupled
to a custom silicon transimped-
ance preamplifier IC. They are
packaged in the optical sub-
assembly portion of the receiver.
The PIN/preamplifier combina-
tion is ac-coupled to a custom
quantizer IC which provides the
final pulse shaping for the logic
output and the Signal Detect
function. Both the Data and
Signal Detect outputs are
DIFFERENTIAL
DATA OUT
DIFFERENTIAL
SIGNAL
DETECT OUT
ELECTRICAL SUBASSEMBLY
QUANTIZER IC
PREAMP
IC
PIN PHOTODIODE
OPTICAL
SUBASSEMBLIES
DIFFERENTIAL
DATA IN
DRIVER IC
LED
Figure 1. HFBR-5111/-5112/-5113 Block Diagram.
TOP VIEW
93









No Preview Available !

HFBR-5113 Даташит, Описание, Даташиты
4X 1.22 X 1.52
0.050 0.060
2.54
0.100
1.91 MAX.
0.075
34.34
1.352
30.48
1.200
2X
ø
3.80
0.150
4X
ø
1.50
0.060
SOLDER
POSTS
22X
ø
0.48
0.019
LEADS
5.08
0.200
81.32
3.202
63.5 45.72 44.45
2.500 1.800 1.750
OPTICAL
REFERENCE
PLANE
40.64
1.600
35.56
1.400
ACCEPTS SELF TAPPING
2X – M2X0.4 SCREW FOR
OPTIONAL MOUNTING
2.54 TYP.
0.100
2.95
0.116
78.87
3.105
LATCH
POINTS
2X
1.52
0.060
SQ.
16.00 MAX.
0.630
PLUG – REF.
33.02
1.300
MAX.
NOTES:
1. ALL DIMENSIONS ARE MILLIMETERS OVER INCHES.
2. ALL DIMENSIONS ARE NOMINAL UNLESS OTHERWISE SPECIFIED.
3. THE LEADS ARE TIN-LEAD PLATED PHOSPHOR BRONZE.
4. THE POSTS ARE TIN-LEAD PLATED BRASS.
5. THE HOUSING IS GLASS FIBER FILLED BLACK POLYETHERIMIDE.
6. THE MODULE IS SHOWN WITHOUT THE FIELD KEY INSTALLED.
Figure 2(a). HFBR-5111 Outline Drawing.
2.95
0.116
0.85
0.034
11.87
0.467
MAX.
9.40
0.370
MAX.
H
PART NUMBER
DATE CODE
COUNTRY OF ORIGIN
82.5 MAX.
3.248
35.80 MAX.
1.409
FDDI KEY
LOCATION
9.14
(0.360)
24.86
(0.979)
5.79
(0.228)
19.99
(0.787)
41.30
(1.626)
OPTICAL
REFERENCE
PLANE
34.46 (1.357)
30.48 (1.200)
29.00 (1.142)
(02.1.5040)TYP.
13X (00..04189)LEADS
2X (01..00309)
2X (01..05620)SOLDER POSTS
22.86
(0.900)
2.95
(0.116)
39.94
(1.533)
LATCH
POINTS
H
PART NUMBER
DATE CODE
COUNTRY OF ORIGIN
(626.6.1065)MAX.
(106.6.0300)MAX.
PLUG – REF.
(313.3.0020)MAX.
Figure 2(b). HFBR-5112 Outline Drawing.
94
2X 3.00
(0.118)
3.68
(0.145)
0.80
(0.031)
(101.4.8677)MAX.
(09..34700)MAX.
(315.4.8009)MAX.
FDDI KEY
LOCATION










Скачать PDF:

[ HFBR-5113.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HFBR-5111Low Cost/ Industry Standard FDDI MIC TransceiversAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HFBR-5112Low Cost/ Industry Standard FDDI MIC TransceiversAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HFBR-5113Low Cost/ Industry Standard FDDI MIC TransceiversAgilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск