D2F-01F PDF даташит
Спецификация D2F-01F изготовлена «Omron» и имеет функцию, называемую «Snap Action Switch». |
|
Детали детали
Номер произв | D2F-01F |
Описание | Snap Action Switch |
Производители | Omron |
логотип |
8 Pages
No Preview Available ! |
Snap Action Switch
D2F
Subminiature Snap Action Switch
• Switches 3 A loads (general-purpose), 1 A loads
(low force general-purpose) and 0.1 A loads(microvoltage/
microcurrent)
• Long life span assured by high-precision dual spring
reverse-action mechanism
• Flux penetration prevented by using an insert terminal and
allowing a height difference at the case bottom
• Ideal for a wide range of applications including appliances,
office equipment, audio and communications equipment
• RoHS Compliant
Ordering Information
Actuator
Pin plunger
Hinge lever
Simulated
roller lever
Roller lever
Contact
type
Model
Contact Model
OF Terminal type
PCB
Self-
supporting
Microvoltage/ Low force 75 g D2F-01F
current
Standard 150 g D2F-01
D2F-01F-T
D2F-01-T
General-
purpose
Low force 75 g D2F-F
Standard 150 g D2F
D2F-F-T
D2F-T
Microvoltage/ Low force 25 g
current
Standard 80 g
D2F-01FL
D2F-01L
D2F-01FL-T
D2F-01L-T
General-
purpose
Low force 25 g
Standard 80 g
D2F-FL
D2F-L
D2F-FL-T
D2F-L-T
Microvoltage/ Low force 40 g
current
Standard 80 g
D2F-01FL3
D2F-01L3
D2F-01FL3-T
D2F-01L3-T
General-
purpose
Low force 40 g
Standard 80 g
D2F-FL3
D2F-L3
D2F-FL3-T
D2F-L3-T
Microvoltage/ Low force 40 g
current
Standard 80 g
D2F-01FL2
D2F-01L2
D2F-01FL2-T
D2F-01L2-T
General-
purpose
Low force 40 g
Standard 80 g
D2F-FL2
D2F-L2
D2F-FL2-T
D2F-L2-T
Solder
Compact
Solder
D2F-01F-D3 D2F-01F-D
D2F-01-D3 D2F-01-D
D2F-F-D3
D2F-F-D
D2F-D3
D2F-D
D2F-01FL-D3 D2F-01FL-D
D2F-01L-D3 D2F-01L-D
D2F-FL-D3 D2F-FL-D
D2F-L-D3
D2F-L-D
D2F-01FL3-D3 D2F-01FL3-D
D2F-01L3-D3 D2F-01L3-D
D2F-FL3-D3 D2F-FL3-D
D2F-L3-D3 D2F-L3-D
D2F-01FL2-D3 D2F-01FL2-D
D2F-01L2-D3 D2F-01L2-D
D2F-FL2-D3 D2F-FL2-D
D2F-L2-D3 D2F-L2-D
Right-angle
D2F-01F-A
D2F-01-A
D2F-F-A
D2F-A
D2F-01FL-A
D2F-01L-A
D2F-FL-A
D2F-L-A
D2F-01FL3-A
D2F-01L3-A
D2F-FL3-A
D2F-L3-A
D2F-01FL2-A
D2F-01L2-A
D2F-FL2-A
D2F-L2-A
Left-angle
D2F-01F-A1
D2F-01-A1
D2F-F-A1
D2F-A1
D2F-01FL-A1
D2F-01L-A1
D2F-FL-A1
D2F-L-A1
D2F-01FL3-A1
D2F-01L3-A1
D2F-FL3-A1
D2F-L3-A1
D2F-01FL2-A1
D2F-01L2-A1
D2F-FL2-A1
D2F-L2-A1
Model Number Legend
D2F-
1 234
1. Ratings
3. Actuator
4.
None: General loads
None: Pin plunger
01: Micro loads (0.1 A at 30 VDC)
L: Hinge lever
2. Maximum Operating Force
None: 1.47 N {150 gf}
L2: Hinge roller lever
L3: Simulated roller lever
F: 0.74 N {75 gf}
Note: These OF values are for the pin plunger models.
Terminals
None: PCB terminals/straight terminals
-T: Self-clinching PCB terminals
-A: Right-angled PCB terminals
-A1: Left-angled PCB terminals
-D3: Solder terminals
-D: Compact solder terminals
Snap Action Switch D2F
31
Free Datasheet http://www.datasheet4u.com/
No Preview Available ! |
Specifications
■ Characteristics
Operating speed
1 to 500 mm/second (pin plunger models)
Operating frequency
Mechanical: 200 operations per minute max.
Electrical: 30 operations per minute max.
Contact resistance
General Purpose: 30 mΩ max. (Standard force versions)
50 mΩ max. (Low force versions)
Microload:
100 mΩ max.
Insulation resistance
100 MΩ min. at 500 VDC
Dielectric strength (See note 2)
600 VAC, 50/60 Hz for 1 minute between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground, and between each
terminal and non-current-carrying metal parts
Vibration resistance (See note 3) Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance (See note 3)
Destruction: 1,000 m/s2 (approx. 100G) max.
Malfunction: 300 m/s2 (approx. 30 g min.) max.
Degree of protection
IEC IP40
Degree of protection against
electric shock
Class I
Proof tracking index (PTI)
175
Ambient operating temperature
-25° to 65°C (at 60% RH) with no icing
Ambient operating Humidity
85% max. (for 5° to 35°C)
Service life
Mechanical: 1 million operations min. at 60 operations/minute.
(Consult Omron for test conditions) Electrical: 30,000 operations min. at 30 operations/minute.
Weight
Approx. 0.5 g (pin plunger models)
Note: 1. Data shown are of initial value.
2. The dielectric strength shown in the table indicates a value for models with a separator.
3. For pin plunger models, the values are measured at the free position and total travel position. For the lever models, they are measured
at the total travel position.
■ Ratings
Rated Voltage
125 VAC
30 VDC
Resistive load
Microvoltage/current (D2F-01 models)
Low force
Standard
——
0.1 A
0.1 A
General-purpose (D2F models)
Low force
Standard
1A 3A
0.5 A
2A
Note: 1. When using an inductive load or motor load, consult OMRON.
2. The ratings apply under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.
■ Approvals
UL Recognized, CSA Certified
Rated voltage
125 VAC
30 VDC
D2F
Standard
Force
Low Force
3 A 1A
2 A 0.5 A
D2F-01
---
0.1 A
Note: The rated values approved by each of the safety standards
(e.g.UL,CSA) may be different from the performance character-
istics individually defined in this catalog.
■ Contact Specifications
Item
Specification
Material
Gap
(Standard value)
Minimum Applicable Load
(See note)
D2F
Crossbar
Silver alloy
0.25 mm
D2F-01
Gold alloy
100 mA at 5 VDC 1 mA at 5VDC
Note: Minimum applicable loads are indicated by N standard
reference values. This value represents the failure rate at a
60% (λ60) reliability level (JIS C5003).
The equation λ60=0.5 x 10-6/operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%.
32 Snap Action Switch D2F
Free Datasheet http://www.datasheet4u.com/
No Preview Available ! |
Engineering Data
■ Mechanical Service Life
D2F, D2F-01
10,000
7,000
5,000
Ambient temperature: 20°±2°C
Ambient humidity: 65±5% max.
Without load
Operating frequency: 60 operations/min
3,000
1,000
700
500
300
100
0
Overtravel (mm)
Note: Values are for pin plunger actuator type.
■ Mounting
All switches may be panel mounted using M2 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.08 to 0.1 N·m.
Two , 2-dia. mounting holes
6.5 ± 0.15
Use of molded components is recommended for mounting purposes
■ Electrical Service Life
D2F
300
100
50
30 30 VDC
20
Ambient temperature: 20°±2°C
Ambient humidity: 65±5% max.
Without load
Operating frequency: 30 operations/min
125 VAC
10
Rated operating current (A)
■ PCB Layout (reference)
2.54
5.8 ± 0.15
2.54
5.08 ± 0.1
12.8 ± 0.15
Three,
1.2 dia. holes
■ Structure
Contact Form (SPDT)
Snap Action Switch D2F
33
Free Datasheet http://www.datasheet4u.com/
Скачать PDF:
[ D2F-01F.PDF Даташит ]
Номер в каталоге | Описание | Производители |
D2F-01-A | Snap Action Switch | Omron |
D2F-01-A1D2F-F | Snap Action Switch | Omron |
D2F-01-D | Snap Action Switch | Omron |
D2F-01-D3 | Snap Action Switch | Omron |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |