DataSheet26.com

NS-3913-G1 PDF даташит

Спецификация NS-3913-G1 изготовлена ​​​​«Syn-Tech» и имеет функцию, называемую «Gear and Coupling Grease».

Детали детали

Номер произв NS-3913-G1
Описание Gear and Coupling Grease
Производители Syn-Tech
логотип Syn-Tech логотип 

1 Pages
scroll

No Preview Available !

NS-3913-G1 Даташит, Описание, Даташиты
NS-3913-G1
Specifications
NSN 9150-00-506-8497
Bell Helicopter 204-040-755-005
Gear and Coupling Grease (NSN 9150-00-506-8497)
NS-3913-G1 is an extreme pressure fortified grease designed for couplings and gears. High film
strength components provide long lasting protection. EP and anti-wear additives along with rust
inhibitors provide excellent performance for applications ranging from aerospace such as helicopter
drive shaft couplings and bearings to industrial applications such as steel mill gear couplings.
NS-3913-G1 is the only lubricant approved by Bell Helicopter Textron for use on their Crown Gear
Driveshaft couplings.
Characteristics:
Superior lubricity - low friction, less wear
High film strength
EP and anti-wear additives
Wide operating temperature range of -40°F to +300°F
Typical properties
Penetration, ASTM D217, worked, 60 DS
Penetration, ASTM D217, worked, 100,000 DS
Dropping point, ASTM D2265, °F(°C), min.
Dirt Count,FTM 791b, 3005.3 25 microns and >
Dirt Count,FTM 791b, 3005.3 75 microns and >
Dirt Count,FTM 791b, 3005.3 125 microns and >
Oil Separation, FTM 321.3, 24 hrs. @ 212°F, %
Evaporation Loss, ASTM D972, 22 hrs. @ 250°F, %
Water Washout, ASTM D1264, 100°F, %
Water Washout, ASTM D1264, 175°F, %
Bomb Oxidation, ASTM D942, psi
Thickener
Color
300
400 max.
500(260)
1500 max.
500 max.
50 max.
2.5 max.
5
10 max.
10 max.
12.5 max
Inorganic
Dark Brown
Typical base fluid properties
Flash point, ASTM D92, °F(°C)
Viscosity, ASTM D445 @ 100°F, cSt
Viscosity, ASTM D445 @ 210°F, cSt
Viscosity, ASTM D445 @ -40°F, cSt
Viscosity Index Extended, ASTM D2270
Pour point, ASTM D97, °F(°C)
470(244) min.
30
5.5
22,000 max.
130
-65(-85) max.
Material Compatibilities:
Not for use with ABS, polycarbonate, polyester, PPO, or PVC plastics. Not for use on buna
S, butyl, or neoprene elastomers. Check with material manufacturer or Syn-Tech
concerning compatibility.
6/08 Rev.6
The information provided herein is offered without warranty, express or implied. Because Syn-Tech does not have control over
products it gives as samples or sells, we can't guarantee the suitability of the product for your application. The information above is
therefore only to be used as a recommendation. SOF 7.3-01-07 3/15/05
ISO 9001:2000 Registered
Free Datasheet http://www.datasheet4u.c










Скачать PDF:

[ NS-3913-G1.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NS-3913-G1Gear and Coupling GreaseSyn-Tech
Syn-Tech

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск