|
|
Número de pieza | NTSJ3080CTG | |
Descripción | Very Low Forward Voltage Trench-based Schottky Rectifier | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NTSJ3080CTG (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! NTSJ3080CTG
Very Low Forward Voltage
Trench-based Schottky
Rectifier
Exceptionally Low VF = 0.455 V at IF = 5 A
Features
• Fine Lithography Trench−based Schottky Technology for Very Low
Forward Voltage and Low Leakage
• Fast Switching with Exceptional Temperature Stability
• Low Power Loss and Lower Operating Temperature
• Higher Efficiency for Achieving Regulatory Compliance
• Low Thermal Resistance
• High Surge Capability
• Pb−Free and Halide−Free Packages are Available
Typical Applications
• Switching Power Supplies including Notebook / Netbook Adapters,
ATX and Flat Panel Display
• High Frequency and DC−DC Converters
• Freewheeling and OR−ing diodes
• Reverse Battery Protection
• Instrumentation
Mechanical Characteristics
• Case: Epoxy, Molded
• Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Maximum for
10 sec
http://onsemi.com
PIN CONNECTIONS
1
2, 4
3
TO−220FB
CASE 221AH
MARKING DIAGRAMS
AYWW
TS3080CG
AKA
1
A
Y
WW
AKA
G
= Assembly Location
= Year
= Work Week
= Polarity Designator
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
November, 2011 − Rev. 0
1
Publication Order Number:
NTSJ3080CT/D
Free Datasheet http://www.datasheetlist.com/
1 page NTSJ3080CTG
PACKAGE DIMENSIONS
TO−220 FULLPACK, 3−LEAD
CASE 221AH
ISSUE B
E
E/2
4
Q
1 23
A
P
0.14 M B A M
DC
L L1
3X b2
e
3X b
0.25 M B A M C
H1
c
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
B
SEATING
PLANE
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A 3. CONTOUR UNCONTROLLED IN THIS AREA.
A1
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH
AND GATE PROTRUSIONS. MOLD FLASH AND GATE
PROTRUSIONS NOT TO EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE TO BE MEASURED AT OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. DIMENSION b2 DOES NOT INCLUDE DAMBAR
PROTRUSION. LEAD WIDTH INCLUDING PROTRUSION
NOTE 3
SHALL NOT EXCEED 2.00.
MILLIMETERS
DIM MIN MAX
A 4.30 4.70
A1 2.50 2.90
A2 2.50 2.70
b 0.54 0.84
b2 1.10 1.40
c 0.49 0.79
A2 D 14.70 15.30
E 9.70 10.30
e 2.54 BSC
H1 6.70 7.10
L 12.70 14.73
L1 --- 2.80
P 3.00 3.40
Q 2.80 3.20
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTSJ3080CT/D
Free Datasheet http://www.datasheetlist.com/
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet NTSJ3080CTG.PDF ] |
Número de pieza | Descripción | Fabricantes |
NTSJ3080CTG | Very Low Forward Voltage Trench-based Schottky Rectifier | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |