DataSheet26.com

SF1115A PDF даташит

Спецификация SF1115A изготовлена ​​​​«RFM» и имеет функцию, называемую «199 MHz SAW Filter».

Детали детали

Номер произв SF1115A
Описание 199 MHz SAW Filter
Производители RFM
логотип RFM логотип 

3 Pages
scroll

No Preview Available !

SF1115A Даташит, Описание, Даташиты
• Designed for GSM BTS Receiver IF Applications
• Compatible with National Semiconductor Chip Set
• Very Flexible Impedance Matching
• Unbalanced or Balanced Input or Output
• 9.1 x 7.1 mm Version of the SF1115A-1
• Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max. Soldering Profile
Value
Units
+15 dBm
30 VDC
-40 to +85
°C
260°C for 30 s
SF1115A
199 MHz
SAW Filter
SM9171-10
Electrical Characteristics
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
1 db Passband
Amplitude Ripple over fc±100 kHz
Group Delay Variation over fc ±100 kHz
Rejection
Room Temperature fc+800 to fc+400 kHz
Room Temperature fc-800 to fc-400 kHz
fc-800 to fc-600 and fc+600 to fc+800 kHz
fc-30 MHz to fc-800 kHz
fc+800 kHz to fc+17 MHz
fc-80 MHz to fc-30 MHz
fc+17 Mhz to fc+80 MHz
Operating Temperature Range
Frequency Temperature Coefficient
Sym
fC
IL
BW1
GDV
TA
FTC
Impedance Matching to 50Unbalanced
Impedance Matching to 200Balanced
Impedance Matching to 50Input / 400Output
Case Style
Lid Symbolization (YY = year, WW = week)
Notes
1
1, 2
1, 2, 3
1
1
Min
±100
10
10
20
30
30
35
35
-35
Typ
199.000
0.032
Max
7.0
0.5
500
+85
External L-C
External L-C
External L-C
SMP9171-10 9.1 x 7.1 mm Nominal Footprint
RFM SF1115A YYWW
Units
MHz
dB
kHz
dBP-P
nsP-P
dB
°C
ppm/°C2
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with
impedance matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout
and external impedance matching design. See Application Note No. 42 for details.
4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may
be calculated from: f=fo[1-FTC(To-Tc)2].
5. The design, manufacturing process, and specifications of this filter are subject to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port
1 and Port 2, so that the filter must always be installed in one direction per the circuit design.
7. US and international patents may apply.
8. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF1115A-9/7/07
Page 1 of 12
Free Datasheet http://www.datasheetlist.com/









No Preview Available !

SF1115A Даташит, Описание, Даташиты
199 MHz
SAW Filter
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF1115A-9/7/07
Page 2 of 12
Free Datasheet http://www.datasheetlist.com/









No Preview Available !

SF1115A Даташит, Описание, Даташиты
199 MHz
SAW Filter
SM9171-10 Case
10-Terminal Ceramic Surface-Mount Case
9.1 x 7.1 mm Nominal Footprint
Case Dimensions
Dimension
mm
Min Nom Max
Inches
Min Nom Max
A 8.86 9.09 9.40 0.349 0.358 0.370
B 6.88 7.11 7.40 0.271 0.280 0.291
C
1.91 2.00
0.075 0.079
D 0.99
0.039
E 0.79
0.031
H 1.0
0.039
P 2.54
0.100
Solder Pad
Termination
Lid
Body
Pb Free
Materials
Au plating 30 - 60 µinches (76.2-152 µm) over 80-
200 µinches (203-508 µm) Ni.
Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%
Phosphorus) 100-200 µinches Thick
Al2O3 Ceramic
Electrical Connections
Connection
Port 1 Input or Return
Return or Input
Port 2 Output or Return
Return or Output
Ground
Single Ended Operation
Differential Operation
Terminals
6
5
1
10
All others
Return is ground
Return is hot
B
32
C
H
P
23
41
5 10 A
69
78
1
E
(10 Places) 10
(10 Places) D
9
87
4
5
6
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
http://www.rfm.com
SF1115A-9/7/07
Page 3 of 12
Free Datasheet http://www.datasheetlist.com/










Скачать PDF:

[ SF1115A.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SF1115A199 MHz SAW FilterRFM
RFM

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск