|
|
Número de pieza | SF1124A | |
Descripción | 190 MHz SAW Filter | |
Fabricantes | RFM | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SF1124A (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! SF1124A 190 MHz SAW Filter
• Designed for WCDMA 3G IF Applications
• Excellent Size-to-Performance Ratio
• Very Flexible Impedance Matching
• Balanced or Unbalanced Input and Output
• Hermetic 13.3 x 6.5 mm Surface-Mount Case
See Associated Plots
Characteristic
Nominal Center Frequency
Passband
Insertion Loss at fc
1 dB Passband
3 dB Passband
Amplitude Ripple over fc ±2.4 MHz
Phase Variation over fc ±2.4 MHz
Group Delay Variation over fc ±2.4 MHz
Rejection
fc-4.1 to fc-3.65 and fc+3.4 to fc+3.8 MHz
fc-5.0 to fc-4.1 and fc+3.8 to fc+5.0 MHz
fc-10.0 to fc-5.0 and fc+5.0 to fc+10.0 MHz
fc-20.0 to fc-10.0 and fc+10.0 to fc+20.0 MHz
At 157.6 MHz
At 165.7 MHz
fc-60 MHz to fc-20 MHz
fc+20 MHz to fc+60 MHz
Part to Part Average Group Delay Variation
Operating Temperature Range
Frequency Temperature Coefficient
Sym
fc
IL
BW1
BW3
GDV
TA
FTC
Min Typ Max Units Notes
190.000
MHz
1
12 14.0 dB
4.6 5.1
MHz 1, 2
5.1 5.7
.70 1.0 dBP-P
4 10 °P-P
75 120 nsP-P
10 dB 1, 2, 3
30
40
40
40
40
40
40
±5 nsec
4
-10 +25 +85 °C
1
-18 ppm/°C
Matching to Unbalanced or Balanced Impedance
Case Style
Lid Symbolization (YY = year, WW = week) See note 4
External L-C
SMP-53 13.3 x 6.5 mm Nominal Footprint
RFM SF1124A YYWW
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Max Soldering Profile
Value Units
+10 dBm
30 VDC
-40 to +85 °C
265°C for 10 s
Electrical Connections
Connection Terminals
Port 1 Hot 11
Port 1 Gnd Return 12
Port 2 Hot 5
Port 2 Gnd Return 6
Case Ground All others
Notes:
1. All specifications apply filter soldered to the RFM specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω
network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout
and external impedance matching design. See Application Note No. 42 for details.
4. Part to part absolute delay measurement records the absolute delay mean across 1dB passband.
5. “LRIP” or “L” after the part number indicates “low rate initial production” and “ENG” or “E” indicates “engineering prototypes.”
6. The design, manufacturing process, and specifications of this filter are subject to change.
7. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between
Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design.
8. US and international patents may apply.
9. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
10. ©Copyright 1999, RF Monolithics Inc.
11. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc.
4347 Sigma Road
Dallas, Texas 75244
USA
Phone: +1(972)233-2903
Fax: +1(972)387-8148
e-mail: [email protected]
Home page: www.rfm.com
European Sales Office
44 1963 251383
44 1963 251510
SF1124A.DOC 1/29/2001 D
Free Datasheet http://www.datasheetlist.com/
1 page 5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet SF1124A.PDF ] |
Número de pieza | Descripción | Fabricantes |
SF1124A | 190 MHz SAW Filter | RFM |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |