DataSheet26.com

NKRG141 PDF даташит

Спецификация NKRG141 изготовлена ​​​​«ETC» и имеет функцию, называемую «SUPER BRIGHT LED LIGHT BAR MODULE».

Детали детали

Номер произв NKRG141
Описание SUPER BRIGHT LED LIGHT BAR MODULE
Производители ETC
логотип ETC логотип 

19 Pages
scroll

No Preview Available !

NKRG141 Даташит, Описание, Даташиты
TABLE OF CONTENTS
Description of Terminology…………………………………………………………………………………2
Structural Drawing …………………………………………………………………………………………2
Reliability Test and Measuring Method …………………………………………………………………2
Handling Precautions ………………………………………………………………………………………3
Super Bright LED Light Bar Module
Description of Part Number …………………………………………………………………………4
Characteristics by Color ………………………………………………………………………………4
LED Light Bar Module Product Line ………………………………………………………………4-7
Super Bright LED Numeric Display (Seven Segment Display)
Description of Part Number ………………………………………………………………………………8
Characteristics by Color …………………………………………………………………………………8
7.5mm Type …………………………………………………………………………………………………9
10.0mm Type ……………………………………………………………………………………………10-12
15.0mm Type ………………………………………………………………………………………………13
25.0mm Type ………………………………………………………………………………………………14
Bi-Color LED Numeric Display…………………………………………………………………………………15
Alpha Numeric LED Display ………………………………………………………………………………16
Index by Part Number …………………………………………………………………………………17-19
1
Free Datasheet http://www.0PDF.com









No Preview Available !

NKRG141 Даташит, Описание, Даташиты
DESCRIPTION OF TERMINOLOGY
ITEMS SYMBOLS
DEFINITION
Power dissipation
Forward current
Peak forward current
Current derating
Forward voltage
Reverse current
Luminous intensity
Peak wavelength
Spectral line half width
(Pd)
(IF)
(IFM)
(IF)
(VF)
(IR)
(IV)
(λp)
(∆λ)
Power dissipated by forward current and forward voltage
Current from anode to cathode
Forward peak current driven during pulse lighting
Derating over 25°C ambient temperature
Voltage drop when forward current goes from anode to cathode
Leakage current when bias voltage is applied from cathode to anode
Flux in lumens per unit of solid angle on optical axis
Wavelength at which radiant intensity becomes greatest
Wavelength range in which radiant intensity becomes more than 50% of its peak value
UNIT
(mW)
(mA)
(mA)
(mA/°C)
(V)
(µA)
(mcd)
(nm)
(nm)
RELIABILITY TEST AND MEASURING METHOD
Items to be Guaranteed for LEDs
TEST ITEM
STANDARDS
TEST CONDITION
Operating Endurance Test
JIS C 7035
Added documents
Ta=25°C, IF=Maximum Rated Current, t=1000 Hrs.
Resistance to Soldering Heat
JIS C 7021
A-1
260+5°C, 10+1sec., 3mm from package base
Temperature Cycling
JIS C 7021
A-4
-30°C (30 min) to normal temperature (15 min) to +100°C (30 min) To normal temperature (15 min) 5 cycles
Humidity (Steady State)
JIS C 7021
B-11
Ta=60+2°C, RH=90+5%, t=1000Hr
High Temperature (Storage)
JIS C 7021
B-10
Ta=100+2°C, t=1000Hr
Low Temperature (Storage)
JIS C 7021
A-12
Ta=30+2°C, t=1000Hr
Lead Tension
JIS C 7021
A-11
*1kg/10 sec. one time (thin lead: 0.5kg)
Vibration Fatigue
JIS C 7021
A-10
10G, 100 to 2000Hz sweep for 20 min., 2 hours for directions X, Y and Z
SAMPLE
SIZE
25
25
25
25
25
25
10
10
Measuring Method
Luminous Intensity (Iv)
Detector
7°
(0.01sr)
Dark room
LED
A
Constant Current Power Supply
2
Structural Drawing for Numeric Display
Epoxy resin
LED chip
Lamp house
Lead frame
Free Datasheet http://www.0PDF.com









No Preview Available !

NKRG141 Даташит, Описание, Даташиты
HANDLING PRECAUTIONS
Soldering Conditions
Please refer to each product to see if it’s compatible with lead-free soldering.
Conventional Soldering Conditions
SOLDERING IRON
DIP SOLDERING
Iron Tip Temperature: 300°C Max. (30W Max.)
Soldering Time: 3 Seconds Max.
Location: At least 3.0mm away from resin
Pre-heat: 80°C Max. / 60 sec. Max.
(Resin surface temperature)
Bath Temperature: 260°C Max.
Dipping Time: 5 sec. Max.
Position: At least 3.0mm away from resin body
Lead-Free Soldering Conditions
SOLDERING IRON
Iron Tip Temperature: 400°C Max.
Soldering Iron: 30W Max.
Soldering Time: 3 Seconds Max.
Position: At least 2.0mm away from resin
DIP SOLDERING
Pre-heat: 100°C Max. / 60 seconds Max.
(Resin surface temperature)
Bath Temperature: 265°C Max.
Dipping time: 5 sec. Max.
Position: At least 2.0mm away from resin body
REFLOW SOLDERING
Not recommended
REFLOW SOLDERING
Not recommended
Cleaning
Residual solder of flux left on the LED housing could reduce intensity
and could affect the optical characteristics. Excess flux can be
removed by the following chemical method:
1. Cleaning solvents (dipping time: 3 minutes maximum at
normal temperature)
• Ethyl alcohol
• Isopropyl alcohol
• Pure water (after cleaning, the water must be removed
by drying)
• Drying condition: 90°C max., 30 sec. max. and 4 times max.
2. The effect of ultrasonic cleaning on the LED resin body depends
on such factors as the oscillator output, size of PCB and LED
mounting method. Ultrasonic cleaning is strongly recommended
after confirming that there are no problems.
1. Ultrasonic wave frequency: 28 kHz or 40 kHz
2. Output: 20 W/I
3. The solvent for freon equivalent (recommended after confirming
that there are no problems).
• AK-225AES
• Clean through
• Pine alpha ST-100S
Chemicals
Ethyl alcohol
Isopropyl alcohol
Pure water
Freon substitute detergent
AK225AES
Clean through 705H
Pine alpha ST-100S
* DIP Soldering and cleaning is not recommended for Alpha-Numeric (AAR121and AAA121) LED displays.
3
Free Datasheet http://www.0PDF.com










Скачать PDF:

[ NKRG141.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NKRG141SUPER BRIGHT LED LIGHT BAR MODULEETC
ETC
NKRG143SUPER BRIGHT LED LIGHT BAR MODULEETC
ETC

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск