SCM7B32 Datasheet PDF - Dataforth
| Part Number | SCM7B32 | |
| Description | Isolated Process Current/Voltage Input Modules | |
| Manufacturers | Dataforth | |
| Logo |  |
|
|
There is a preview and SCM7B32 download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
Isolated Process Control Signal Conditioning Products
SCM7B
SCM7B32/33
Isolated Process Current/Voltage Input Modules
Description
The SCM7B32 current input modules accept input signals in the 4-20mA or
0-20mA ranges from the field and provide a high-level output to the process
control system (Figure 1). Current to voltage conversion occurs internal to the
module, which is factory calibrated to ensure the highest accuracy.
SCM7B33 voltage input modules accept input signals in the +1V to +5V or 0 to
+5V ranges from the field and provide a high-level output to the process
control system. As an alternative, the SCM7B33 can be used with an external
250Ω resistor (Dataforth SCM7BXR1 or equivalent), to accept input signals in
the 4-20mA or 0-20mA ranges. Using the external sense resistor allows the
module to be removed without disrupting the current loop. All SCM7B33s are
shipped with a SCM7BXR1 resistor.
These modules incorporate a five-pole filtering approach to maximize both time
and frequency response by taking advantage of both Thomson (Bessel) and
Butterworth characteristics. One pole of the filter is on the field side of the
isolation barrier; four are on the process control system side.
After the initial field-side filtering (conversion-SCM7B32 only), the input signal
is chopped by a proprietary chopper circuit and transferred across the trans-
former isolation barrier, suppressing transmission of common mode spikes and
surges. The signal is then reconstructed and filtered for process control system
output.
Modules accept a wide 14 - 35VDC power supply range (+24VDC nominal).
Their compact packages (2.13"x1.705"x0.605" max) save space and are ideal
for high channel density applications. They are designed for easy DIN rail
mounting using any of the “-DIN” backpanels.
Features
• Accepts Current or Voltage Input
• Provides High-Level Voltage Outputs
• 1500Vrms Transformer Isolation
• Accuracy, ±0.03% of Span Typical,
±0.1% Max
• ANSI/IEEE C37.90.1 Transient Protection
• Input Protected to 120Vrms Continuous
• Noise, 500µVp-p (5MHz), 300µVrms
(100kHz)
• 105dB CMRR
• Easy DIN Rail Mounting
• CSA C/US Certified
• CE and ATEX Compliant
Figure 1: SCM7B32/33 Block Diagram
72 For information call 800-444-7644
©1995-2011 Dataforth Corporation, All Rights Reserved ISO9001:2008-Registered QMS
http://www.Datasheet4U.com/
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SCM7B32 electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ SCM7B32.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| SCM7B32 | The function is Isolated Process Current/Voltage Input Modules. Dataforth | |
| SCM7B33 | The function is Isolated Process Current/Voltage Input Modules. Dataforth | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
SCM7
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||