|
|
PDF NT39016D Data sheet ( Hoja de datos )
| Número de pieza | NT39016D | |
| Descripción | One Chip TFT LCD Driver IC | |
| Fabricantes | Novatek | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NT39016D (archivo pdf) en la parte inferior de esta página. Total 42 Páginas | ||
|
No Preview Available !
NT39016 D
One Chip TFT LCD Driver IC with Timing Controller
For S960xG240 TFT LCD
V0.7
Preliminary Spec.
1
http://www.Datasheet4U.com
1 page  
Function Block Diagram
System Block Diagram
Preliminary Spec. for NT39016D
TFT LCD Driver
Mar 10,2008
5
Version 0.7
With respect to the information represented in this document, Novatek makes no warranty, expressed or implied, including the warranties of merchantability,
fitness for a particular purpose, non-infringement, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any such
information.
5 Page 
Preliminary Spec. for NT39016D
TFT LCD Driver
3-Wire Serial Port Interface (Default Register Map)
3-Wire Command Format
NT39016 uses the 3-wire serial port as communication interface for all the function and parameter setting.
3-Wire communication can be bi-directional controlled by the “R/W” bit in address field. NT39016 3-Wire engine
act as a “slave mode” for all the time, and will not issue any command to the 3-Wire bus itself.
Under read mode, 3-Wire engine will return the data during “Data phase”. The returned data should be latched at
the rising edge of SPCK by external controller. Data in the “Hi-Z phase” will be ignored by 3-Wire engine during
write operation, and should be ignored during read operation also. During read operation, external controller
should float SPDA pin under “Hi-Z phase” and “Data phase”.
Refer to the section of “3-Wire Timing Diagram” for the detail timing, please.
SPENB
Address[5:0]
W Hi-Z
/
R
Data[7:0]
Delay Next Transfer
SPDA
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
D15
SPCK
3-Wire Command Format:
Bit Description
D15-D10
Register Address [5:0].
D9 W/R control bit. “1” for Write; “0” for Read
D8 Hi-Z bit during read mode. Any data within this bits will be ignored during write mode
D7-D0
Data for the W/R operation to the address indicated by Address phase
3-Wire Writer Format:
MSB
LSB
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Register Address [5:0]
1X
DATA (Issue by external controller)
3-Wire Read Format:
MSB
LSB
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Register Address [5:0]
0 Hi-Z
DATA (Issue by NT39016)
Mar 10,2008
11
Version 0.7
With respect to the information represented in this document, Novatek makes no warranty, expressed or implied, including the warranties of merchantability,
fitness for a particular purpose, non-infringement, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any such
information.
11 Page | ||
| Páginas | Total 42 Páginas | |
| PDF Descargar | [ Datasheet NT39016D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NT39016D | One Chip TFT LCD Driver IC | Novatek |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |