|
|
PDF NFSA172T Data sheet ( Hoja de datos )
| Número de pieza | NFSA172T | |
| Descripción | FULL COLOR LED | |
| Fabricantes | NICHIA CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NFSA172T (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
NICHIA STS-DA1-1257A <Cat.No.101130>
NICHIA CORPORATION SPECIFICATIONS FOR AMBER LED
NFSA172T
● Pb-free Reflow Soldering Application
● Built-in ESD Protection Device
● RoHS Compliant
http://www.Datasheet4U.com
1 page  
SOLDERING
• Recommended Reflow Soldering Condition
1 to 5°C per sec.
Pre-heat
180 to 200°C
60 sec. max.
Above 220°C
120sec. max.
260°C max.
10 sec. max.
Recommended Soldering Pad Pattern
3.6
0.5
NICHIA STS-DA1-1257A <Cat.No.101130>
• Recommended Manual Soldering Condition
Temperature
350°C Max.
Soldering Time
3 sec. Max.
(単位 Unit: mm)
* The product is designed to be reflow soldered to a PCB. If you use dip soldering for the products,
Nich ia cannot guarantee its reliability.
* Reflow soldering must not be performed more than twice. Manual soldering must only be done once.
* Care should be taken to avoid cooling at a rapid rate and ensure the peak temperature ramps down slowly.
* Customer is advised to use nitrogen reflow soldering as air flow process can cause optical degradation due to the heat and
atmosphere of reflow soldering.
* Since silicone used as encapsulating resin in this product is a soft material, do not press on the encapsulant.
Failure to comply might lead to nicks, chip-outs, delamination and deformation of the encapsulant, bump breakage
and an adverse effect on product reliability.
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron
should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or
will not be damaged by repairing.
* When soldering, avoid applying any stress to the LED package while heated.
4
5 Page 
NICHIA STS-DA1-1257A <Cat.No.101130>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
NFSA1 72
管理番号 No. STS-DA7-0061A
順電圧 - 順電流特性
周囲温度 - 順電圧特性
Forward Voltage vs
VfIf
Ambient Temperature vs TaVf
Forward Current
Forward Voltage
TA = 25°C
IFP = 150 mA
1000
4.5
4.0
350
150 3.5
100
3.0
2.5
10
2.02
.53 .03 .5 4.0
順電圧
Forward Voltage (V)
4.5
2.0
-60 -40 -20 0 20 40 60 80 100 120
周囲温度
Ambient Temperature (°C)
順電流 - 相対光束特性
Forward Current vs
Relative Luminous Flux
2.5
IfIv
TA = 52°C
周囲温度 - 相対光束特性
Ambient Temperature vs
Relative Luminous Flux
1.4
TaIv
IFP = 150 mA
2.0
1.2
1.5
1.0
1.0
0.8
0.5
0.0
0
100 200 300 400
順電流
Forward C urrent (mA)
500
0.6
-60 -40 -20 0 20 40 60 80 100 120
周囲温度
Ambient Temperature (°C)
10
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet NFSA172T.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NFSA172AT | LED |  NICHIA |
| NFSA172T | FULL COLOR LED | NICHIA CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |