|
|
PDF NSPW570GS-K1 Data sheet ( Hoja de datos )
| Número de pieza | NSPW570GS-K1 | |
| Descripción | NICHIA WHITE LED | |
| Fabricantes | NICHIA CORPORATION | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NSPW570GS-K1 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Nichia STS-DA1-0782
<Cat.No.090428>
SPECIFICATIONS FOR NICHIA WHITE LED
MODEL : NSPW570GS-K1
NICHIA CORPORATION
http://www.Datasheet4U.com
1 page  
7.CAUTIONS
Nichia STS-DA1-0782
<Cat.No.090428>
The LEDs are devices which are materialized by combining Blue LEDs and special phosphors.
Consequently, the color of the LEDs is changed a little by an operating current.
Care should be taken after due consideration when using LEDs.
(1) Lead Forming
· When forming leads, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.
Do not use the base of the leadframe as a fulcrum during lead forming.
· Lead forming should be done before soldering.
· Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED’s
characteristics or it may break the LEDs.
· When mounting the LEDs onto a printed circuit board, the holes on the circuit board should be
exactly aligned with the leads of the LEDs. If the LEDs are mounted with stress at the leads,
it causes deterioration of the epoxy resin and this will degrade the LEDs.
(2) Storage
· The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Nichia and
the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be
stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material.
· Nichia LED leadframes are silver plated copper alloy. The silver surface may be affected by
environments which contain corrosive substances. Please avoid conditions which may cause the LED
to corrode, tarnish or discolor. This corrosion or discoloration may cause difficulty during soldering
operations. It is recommended that the LEDs be used as soon as possible.
· Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where
condensation can occur.
(3) Recommended circuit
· In designing a circuit, the current through each LED must not exceed the absolute maximum rating
specified for each LED. It is recommended to use Circuit B which regulates the current flowing
through each LED. In the meanwhile, when driving LEDs with a constant voltage in Circuit A, the
current through the LEDs may vary due to the variation in forward voltage (VF) of the LEDs. In the
worst case, some LED may be subjected to stresses in excess of the absolute maximum rating.
(A) (B)
· This product should be operated in forward bias. A driving circuit must be designed so that the product
is not subjected to either forward or reverse voltage while it is off. In particular, if a reverse voltage is
continuously applied to the product, such operation can cause migration resulting in LED damage.
-4-
5 Page 
■ 順電流-色度特性
Forward Current vIfsx.y
Chromaticity Coordinate
0.34
Ta=25℃
0.33
0.32
1mA
5mA
3200mmAA
0.31
100mA
0.30
0.29 0.30 0.31 0.32 0.33
x
■ 周囲温度-色度特性
Ambient TemperaTtauxrye vs.
Chromaticity Coordinate
0.34
IFP= 20mA
0.33
0.32
0.31
-30℃
85℃
0℃
25℃
50℃
0.30
0.29 0.30 0.31 0.32 0.33
x
■ 発光スペクトル
Spectrum Spectrum
1.2
Ta=25℃
IF= 20mA
1.0
0.8
0.6
0.4
0.2
0.0
350
450 550 650
波長 λ (nm)
Wavelength λ (nm)
750
■ 指向特性
Directivity
Directivity
-20° -10°
-30°
-40°
0°10°
Ta=25℃
IFP= 20mA
20°
30°
40°
-50°
50°
-60°
60°
-70°
70°
-80°
80°
-90°
1
0.5 0 0.5
相対光度 (a.u.)
Relative Luminosity (a.u.)
90°
1
型名 Model
NSPW570G(S)-K1
日亜化学工業 (株)
NICHIA CORPORATION
名称 初期電気/光学特性
Title CHARACTERISTICS
管理番号
No.
090416 940721
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet NSPW570GS-K1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NSPW570GS-K1 | NICHIA WHITE LED | NICHIA CORPORATION |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |