NCP59151MN25TYG PDF даташит
Спецификация NCP59151MN25TYG изготовлена «ON Semiconductor» и имеет функцию, называемую «Very Low-Dropout (VLDO) Fast Transient Response Regulator Series». |
|
Детали детали
Номер произв | NCP59151MN25TYG |
Описание | Very Low-Dropout (VLDO) Fast Transient Response Regulator Series |
Производители | ON Semiconductor |
логотип |
14 Pages
No Preview Available ! |
NCP59150, NCV59150 Series
1.5 A, Very Low-Dropout
(VLDO) Fast Transient
Response Regulator Series
The NCP59150 series are high precision, very low dropout
(VLDO), low ground current positive voltage regulators that are
capable of providing an output current in excess of 1.5 A with a typical
dropout voltage lower than 300 mV at 1.5 A load current. The devices
are stable with ceramic output capacitors. This series consists of
Adjustable output voltage and fixed voltage versions.
The NCP59150 series can withstand up to 18 V max input voltage.
Internal protection features consist of output current limiting,
built−in thermal shutdown and reverse output current protection.
Logic level enable and error flag pins are available on the 5−pin and
8−pin versions.
The NCP59150 series Adjustable Voltage devices are available in
D2PAK−5 and DFN8 packages, the Fixed Voltage option are available
in D2PAK−5, D2PAK−3 and DFN8 packages.
Features
Output Current in Excess of 1.5 A
300 mV Typical Dropout Voltage at 1.5 A
Adjustable and Fixed Output Voltage Options
Low Ground Current
Fast Transient Response
Stable with Ceramic Output Capacitor
Logic Compatible Enable and Error Flag Pins
Current Limit, Reverse Current and Thermal Shutdown Protection
Operation up to 13.5 V Input Voltage
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These are Pb−Free Devices
Applications
Consumer and Industrial Equipment Point of Regulation
Servers and Networking Equipment
FPGA, DSP and Logic Power Supplies
Switching Power Supply Post Regulation
Battery Chargers
Functional Replacement for Industry Standard MIC29150,
MIC39150, MIC37150
http://onsemi.com
1
5
D2PAK
CASE 936A
MARKING
DIAGRAMS
TAB
y
5915z−xx
AWLYWWG
1
1
3
D2PAK3
CASE 936
TAB
y
59150−xx
AWLYWWG
1
1
DFN8
CASE 488AF
Ncy59
15z−xx
ALYWG
G
xx = Voltage Version
y = P (NCP), V (NCV)
z = 1 (Fix Voltage), 2 (Adj)
A = Assembly Location
L, WL = Wafer Lot
Y, YY = Year
W, WW = Work Week
G, G = Pb−Free Package
(*Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
Semiconductor Components Industries, LLC, 2013
May, 2013 − Rev. 1
1
Publication Order Number:
NCP59150/D
No Preview Available ! |
VIN = 3.0 V
+
CIN
NCP59151
VIN VOUT
EN FLG
GND
NCP59150, NCV59150 Series
TYPICAL APPLICATIONS
100k
VOUT = 2.5 V
+
COUT
47 mF, Ceramic
VIN
+
CIN
NCP59152
VIN VOUT
EN ADJ
GND
1.3 V
R1 +
COUT
47 mF, Ceramic
R2
Figure 1. Fixed 2.5 Regulator with Error Flag
VIN = 3.0 V
+
CIN
NCP59150
VIN VOUT
GND
Figure 2. Adjustable Regulator
VOUT = 2.5 V
+
COUT
47 mF, Ceramic
Figure 3. Fixed 2.5 Regulator in D2PAK−3 Package
PIN FUNCTION DESCRIPTION
Pin Number Pin Number Pin Number
D2PAK−5 D2PAK−3
DFN8
Pin Name
Pin Function
1 − 2 EN Enable Input: CMOS and TTL logic compatible. Logic high = enable; Logic low
= shutdown.
2 1 3 VIN Input voltage which supplies both the internal circuitry and the current to the
output load.
3
2
1
GND
Ground
TAB TAB
− TAB TAB is connected to ground.
4 3 6 VOUT Linear Regulator Output.
5 (Fixed)
−
8 FLG Error Flag Open collector output.
Active−low indicates an output fault condition.
5 (Adj)
−
7 (Adj)
ADJ Adjustable Regulator Feedback Input.
Connect to output voltage resistor divider central node.
−
−
7 (Fixed)
VOUT Fixed Voltage Regulator Feedback Input.
SENSE Connect to output voltage node.
− − EP EXPOSED PAD for removing heat from the device. Must be connected to GND.
PAD
− − 4, 5 NC Not internally connected.
http://onsemi.com
2
No Preview Available ! |
NCP59150, NCV59150 Series
ABSOLUTE MAXIMUM RATINGS
Symbol
Rating
Value
Unit
VIN
VEN
VFLG
VOUT – VIN
PD
TJ
TS
Supply Voltage
Enable Input Voltage
Error Flag Open Collector Output Maximum Voltage
Reverse VOUT – VIN Voltage (EN = Shutdown or Vin = 0 V) (Note 1)
Power Dissipation (Notes 2 and 5)
Junction Temperature
Storage Temperature
ESD Rating (Notes 3 and 4)
Human Body Model
Machine Model
0 to 18
0 to 18
0 to 18
0 to 6.5
Internally Limited
−40 v TJ v +125
−65 v TJ v +150
2000
200
V
V
V
V
C
C
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
NOTE: All voltages are referenced to GND pin unless otherwise noted.
1. The ENABLE pin input voltage must be 0.8 V or Vin must be connected to ground potential.
2.
3.
DPDe(vmicaexs) =ar(eTJE(mSaDx)s–enTsAi)tiv/ eR.qHJAa,nwdhlinegrepRreqcJaAudtieopnesnrdescoumpomnetnhdeepdr.i.nted circuit board layout.
4. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model (HBM) tested per AEC−Q100−002 (EIA/JESD22−A114C)
ESD Machine Model (MM) tested per AEC−Q100−003 (EIA/JESD22−A115C)
This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78.
5. This protection is not guaranteed outside the Recommended Operating Conditions.
RECOMMENDED OPERATING CONDITIONS (Note 6)
Symbol
Rating
VIN Supply Voltage
VEN Enable Input Voltage
VFLG
Error Flag Open Collector Voltage
TJ Junction Temperature
6. The device is not guaranteed to function outside it’s Recommended operating conditions.
Value
2.24 to 13.5
0 to 13.5
0 to 13.5
−40 v TJ v +125
Unit
V
V
V
C
http://onsemi.com
3
Скачать PDF:
[ NCP59151MN25TYG.PDF Даташит ]
Номер в каталоге | Описание | Производители |
NCP59151MN25TYG | Very Low-Dropout (VLDO) Fast Transient Response Regulator Series | ON Semiconductor |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |