DataSheet.es    


PDF HD74HC190 Data sheet ( Hoja de datos )

Número de pieza HD74HC190
Descripción Synchronous Up/Down Decade/4-bit Binary Counter(Single Clock Line)
Fabricantes Hitachi Semiconductor 
Logotipo Hitachi Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de HD74HC190 (archivo pdf) en la parte inferior de esta página.


Total 13 Páginas

No Preview Available ! HD74HC190 Hoja de datos, Descripción, Manual

HD74HC190/HD74HC191
Synchronous Up/Down Decade Counter (Single Clock Line)
Synchronous Up/Donw 4-bit Binary Counter (Single Clock Line)
Description
The HD74HC190 and HD74HC191 are synchronous, reverside up/down counters. The HD74HC190 is a
4-bit decade counter and the HD74HC191 is a 4-bit binary counter. Synchronous counting operation is
provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each
other when so instructed by the steering logic. This mode of operation eliminates the output counting
spikes normally associated with asynchronous (ripple clock) counters.
The outputs of the four flip-flops are triggered on a low-to-high-level transition of the clock input if the
Enable G input is low. A high at Enable G inhibits counting. The direction of the count is determined by
the level of the Down/ Up (D/U) input. When D/U is low, the counter counts up and when D/U is high, it
counts down.
These counters feature a fully independent clock circuit. Changes at the control inputs (D/U) that will
modify the operating mode have no effect on the contents of the counter until clocking occurs. The
function of the counter will be dictated solely by the condition meeting the stable setup and hold times.
These counters are fully programmable; that is, the outputs may each be preset to either level by placing a
low on the load input and entering the desired data at the data inputs. The output will change to agree with
the data inputs independently of the level of the clock input. This feature allows the counters to be used as
modulo-N dividers by simply modifying the count length with the preset inputs.
Two outputs have been made available to perform the cascading function. Ripple clock and
maximum/minimum count. The latter output produces a high-level output pulse with a duration
approximately qual to one complete cycle of the clock while the count is zero (all outputs low) counting
down or maximum (9 or 15) counting up. The ripple clock output produces a low-level output pulse under
those same conditions but only while the clock input is low. The counters can be easily cascaded by
feeding the ripple clock output to the enable input of the succeeding counter if parallel clocking is used, or
to the clock input if paralle enabling is used. The maximum/minimum count output can be used to
accomplish look-ahead for high-speed operation.

1 page




HD74HC190 pdf
Logic Diagram
HD74HC190
Clock
Down/Up
Input A
Enable G
Input B
Input C
Input D
Load
HD74HC190/HD74HC191
CK P Q
CK A
INCL Q
CK P Q
CK B
INCL Q
CK P Q
CK C
INCL Q
CK P Q
CK D
INCL Q
Ripple
Clock
Max/Min
Output
QA
QB
QC
QD
5

5 Page





HD74HC190 arduino
10.06
10.5 Max
16
9
18
0.80 Max
1.27
*0.42 ± 0.08
0.40 ± 0.06
0.15
0.12 M
*Dimension including the plating thickness
Base material dimension
Unit: mm
7.80
+
0.20
0.30
1.15
0.70 ± 0.20
0° – 8°
Hitachi Code
JEDEC
EIAJ
Weight (reference value)
FP-16DA
Conforms
0.24 g

11 Page







PáginasTotal 13 Páginas
PDF Descargar[ Datasheet HD74HC190.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HD74HC190Synchronous Up/Down Decade/4-bit Binary Counter(Single Clock Line)Hitachi Semiconductor
Hitachi Semiconductor
HD74HC191Synchronous Up/Down Decade/4-bit Binary Counter(Single Clock Line)Hitachi Semiconductor
Hitachi Semiconductor
HD74HC192Synchronous Up/Down Decade/4-bit Binary Counter(Dual Clock Line)Hitachi Semiconductor
Hitachi Semiconductor
HD74HC193Synchronous Up/Down Decade/4-bit Binary Counter(Dual Clock Line)Hitachi Semiconductor
Hitachi Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar