|
|
Número de pieza | SDHC10 | |
Descripción | 4-16GB High Capacity Secure Digital Card | |
Fabricantes | Transcend | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SDHC10 (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
No Preview Available ! SDHC10 Card series
Description
Transcend High Capacity SD Card series are
specifically designed to meet the High Capacity, High
Definition Audio and Video requirement for the latest
Digital Cameras, DV Recorders, Mobile Phones, etc,.
The new defined Speed Class enables the host to
support AV applications to perform real time
recording to the SD memory card.
Placement
4~16GB High Capacity Secure Digital Card
Features
• RoHS compliant product.
• Card Lid material: PC (comply with UL94,Flame Class:HB)
• Operating Voltage: 2.7 ~ 3.6V
• Operating Temperature: -25 ~ 85°C
• Durability: 10,000 insertion/removal cycles
• Compatible with SD Specification Ver. 3.0
• Mechanical Write Protection Switch
• Supports Speed Class Specification up to Class 10
• Supports Copy Protection for Recorded Media (CPRM) for
SD-Audio
• Seamless compatibility with SDMI-compliant digital audio
devices
• Form Factor: 24mm x 32mm x 2.1mm
Front
Back
Pin Definition
Pin No. Name
Type
SD Mode
Description
1 CD/DAT I/O/PP3 Card Detect/Data Line [Bit3]
2 CMD PP Command/Response
3 VSS1 S Supply voltage ground
4 VDD S Supply voltage
5 CLK I Clock
6 VSS2 S Supply voltage ground
7 DAT0 I/O/PP Data Line [Bit0]
8 DAT1 I/O/PP Data Line [Bit1]
9 DAT2 I/O/PP Data Line [Bit2]
Name
CS
DI
VSS
VDD
SCLK
VSS2
DO
RSV
RSV
SPI Mode
Type
Description
I Chip Select (neg true)
I Data In
S Supply voltage ground
S Supply voltage
I Clock
S Supply voltage ground
O/PP Data Out
Transcend Information Inc.
1
1 page SDHC10 Card series
4~16GB High Capacity Secure Digital Card
• Bus Signal Levels
As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage.
To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be
within the following specified ranges for any VDD of the allowed voltage range:
Parameter
Output HIGH voltage
Output LOW voltage
Input HIGH voltage
Input LOW voltage
Symbol
VOH
VOL
VIH
VIL
Min.
0.75* VDD
0.625* VDD
VSS – 0.3
Max.
0.125* VDD
VDD + 0.3
0.25* VDD
Unit
V
V
V
V
Remark
IOH = -100 µA @VDD min
IOL = -100 µA @VDD min
Transcend Information Inc.
5
5 Page SDHC10 Card series
4~16GB High Capacity Secure Digital Card
Register Information
Within the card interface six registers are defined: OCR, CID, CSD, RCA, DSR and SCR. These can be accessed only
by corresponding commands. The OCR, CID, CSD and SCR registers carry the card/content specific information,
while the RCA and DSR registers are configuration registers storing actual configuration parameters.
1. OCR register
The 32-bit operation conditions register stores the VDD voltage profile of the card. Additionally, this register includes
status information bits. One status bit is set if the card power up procedure has been finished. This register includes
another status bit indicating the card capacity status after set power up status bit. The OCR register shall be
implemented by the cards. The 32-bit operation conditions register stores the VDD voltage profile of the card. Bit 7 of
OCR is newly defined for Dual Voltage Card and set to 0 in default. If a Dual Voltage Card does not receive CMD8,
OCR bit 7 in the response indicates 0, and the Dual Voltage Card which received CMD8, sets this bit to 1.
Additionally, this register includes 2 more status information bits.
Bit 31 - Card power up status bit, this status bit is set if the card power up procedure has been finished.
Bit 30 - Card Capacity Status bit, 0 indicates that the card is SDSC. 1 indicates that the card is SDHC or SDXC. The
Card Capacity Status bit is valid after the card power up procedure is completed and the card power up
status
The OCR register shall be implemented by the cards.
Transcend Information Inc.
OCR Register Definition
11
11 Page |
Páginas | Total 26 Páginas | |
PDF Descargar | [ Datasheet SDHC10.PDF ] |
Número de pieza | Descripción | Fabricantes |
SDHC10 | 4-16GB High Capacity Secure Digital Card | Transcend |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |