DataSheet26.com

HCS2-141-F PDF даташит

Спецификация HCS2-141-F изготовлена ​​​​«Hirose Electric» и имеет функцию, называемую «RF Coaxial Switches (DC to 15 GHz)».

Детали детали

Номер произв HCS2-141-F
Описание RF Coaxial Switches (DC to 15 GHz)
Производители Hirose Electric
логотип Hirose Electric логотип 

3 Pages
scroll

No Preview Available !

HCS2-141-F Даташит, Описание, Даташиты
RF Coaxial Switches (DC to 15 GHz)
HCS2 Series
sFeatures
1.High Performance and High Reliability
These switches are of the SPDT fail-safe type and
have been designed for wide frequency bandwidth,
contact voltage strength, power saving, and vibration
resistance.
2.SMA Connections
SMA type coupling (Hirose Electric HRM Series) has
been used.
3.Environmentally Rugged
A wide variety of tests including temperature and
humidity cycles, high temperature power, low
temperature power, humidity,vibration, and shock have
been conducted and good results were obtained for all.
sProduct Specifications
Ratings
Frequency range
Characteristic impedance
Maximum Input Power
DC to 15 GHz
50 ohms
15 W
Operating temperature range
Operating relative humidity
0ç to +50ç
(No freezing)
90% Max.
Item
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Vibration
5.Shock
6.Humidity
7.Temperature cycle
Standard
Voltage drop of 4 mV max.
5000 M ohms Min.
No flashover or insulation breakdown
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
Insulation resistance: 1000 M ohms min.
No damage, cracks, or parts dislocation
No damage, cracks, or parts dislocation
1 A DC
Conditions
500 V DC
100 V AC/one minute
Frequency of 10 to 55 Hz, overall amplitude of 1.52 mm for 2 hours in ech of 3 directions,
Frequency of 10 to 500 Hz, acceleration of 49 m/s2 for 3 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform, 6 cycles
in each of the 3 axis
240 hours at temperature of 40ç and humidity of 95%
Temperature: -30ç¡+5ç to +35ç¡+65ç¡+5ç to +35ç
Time: 30¡5 max.¡30¡5 max. (Minutes)
5 cycles
qThe test method conforms to JIS.
qThe temperature resistance cycle, humidity resistance, and shock resistance tests are verification tests of part deterioration and
looseness, not tests to be conducted at time of switching or when conducting.
sMaterials
sOrdering Information
Part
Outer conductor
Inner conductor
Connector Body
Female contact
Insulator
Case
Material
Finish
Aluminum
Conductive alumite
Beryllium copper Gold plating
Stainless steel
Passivated
Beryllium copper Gold plating
PTFE
------
Aluminum
Black alumite
HCS 2 - 1 1 0 - F
q w ert y
qSeries Name: HCS
rSwitching Voltage
1: 12V
4: 17V
wSeries No: 2
eType of Connector
1: SMA
(Hirose Electric HRM Series)
2: 20V
5: 10V
3: 26V
tPresence of Auxiliary Contacts
0: No
1: Yes
yOperation Method
F: Fail-safe type
139









No Preview Available !

HCS2-141-F Даташит, Описание, Даташиты
140
sSpecifications
Part Number
Frequency Range
(GHz)
V.S.W.R. (Max)
DC~00.4GHz
4~00.8GHz
8~12.4GHz
12.4~0.15GHz
HCS2-150-F HCS2-111-F HCS2-110-F HCS2-140-F HCS2-121-F HCS2-120-F HCS2-131-F HCS2-130-F
DC~15
1.20
1.25
1.40
1.50
Insertion Loss (Max)
(dB)
DC~00.4GHz
4~00.8GHz
8~12.4GHz
12.4~0.15GHz
Isolation (Min)
(dB)
Power
(W)
0.2
0.3
0.4
0.5
60
15
Heat Sink Temperature
at Applicable Voltage
(ç Max)
+50
RMS Voltage Rating
Peak (V)
300
Switching Time
(ms)
30
Switching Volt Current DC9~11V DC11~14V DC11~14V DC15~19V DC18~24.5V DC18~24.5V DC24~30V DC24~30V
250mA Max 120mA Max 120mA Max 150mA Max 120mA Max 120mA Max 70mA Max 70mA Max
Durability
(Insertion/withdrawal)
30000
10000
30000
30000
10000
30000
10000
30000
Connectors
HRM-J
Type of Switch
SPDT
Operation
fail-safe
Auxiliary contact point without
with
without
without
with
without
with
without
Weight
(g)
50
qThe value of the switching current is the maximum value at 20ç.
sPrecautions
qThe HCS2 Series is of the fail safe type and designed to make contact by spring force when the drive voltage is not applied. The
application of vibrations or shocks in excess of the spring limit may cause resonance of the spring which results in a loss of contact
stability and intermittent contact.
qThe construction does not prevent the effects of humidity, pressure, or the atmosphere (i.e., gases, oils, and liquids). (Gases, depending
on type, may penetrate the spring material inside. The penetration of gases, oils, or liquids that form a film on the contacts may causes
changes of the insulation or may cause the contacts to cease to conduct.)
qThis product is not magnetically shielded and as such the attention must be paid to the following points.
(1) The plate used to mount this product should be made of non-magnetic material. (Aluminum plate is preferable.)
(2) Avoid the use of magnetic material and anything that may produce a magnetic field such as a magnet in the proximity of the switches
(roughly a 15 mm square).









No Preview Available !

HCS2-141-F Даташит, Описание, Даташиты
sExternal Dimensions
111
HCS2-----121-----F
131
sCircuit Diagram
When Switching Signal is OFF
Switching signal
110
HCS2-----120-----F
130
140
150
sTypical Data
Coaxial connectors
111
HCS2-----121-----F
131
Auxiliary contacts
Switching signal
Coaxial connectors
110
HCS2-----120-----F
130
140
150
141










Скачать PDF:

[ HCS2-141-F.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HCS2-141-FRF Coaxial Switches (DC to 15 GHz)Hirose Electric
Hirose Electric

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск