|
|
PDF HCTS160KTR Data sheet ( Hoja de datos )
| Número de pieza | HCTS160KTR | |
| Descripción | Radiation Hardened Synchronous Counter | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HCTS160KTR (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
Data Sheet
HCTS160T
July 1999 File Number 4626.1
Radiation Hardened Synchronous
Counter
Intersil’s Satellite Applications FlowTM (SAF) devices are fully
tested and guaranteed to 100kRAD total dose. These QML
Class T devices are processed to a standard flow intended
to meet the cost and shorter lead-time needs of large
volume satellite manufacturers, while maintaining a high
level of reliability.
The Intersil HCTS160T is a Radiation Hardened High Speed
Presettable BCD Decade Synchronous Counter that
features an asynchronous reset and look-ahead carry logic.
Counting and parallel presetting are accomplished
synchronously with the low-to-high transition of the clock. A
low level on the synchronous parallel enable input, SPE,
disables counting and allows data at the preset inputs, P0 -
P3, to be loaded into the counter. The counter is reset by a
low on the master reset input, MR. Two count enables, PE
and TE are provided for n-bit cascading. TE also controls the
terminal count output, TC. The terminal count output
indicates a maximum count for one clock pulse and is used
to enable the next cascaded stage to count.
Specifications
Specifications for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD
numbers listed below must be used when ordering.
Detailed Electrical Specifications for the HCTS160T are
contained in SMD 5962-95742. A “hot-link” is provided from
our website for downloading.
www.intersil.com/spacedefense/newsafclasst.asp
Intersil‘s Quality Management Plan (QM Plan), listing all
Class T screening operations, is also available on our
website.
www.intersil.com/quality/manuals.asp
Ordering Information
ORDERING
NUMBER
PART NUMBER
TEMP.
RANGE
(oC)
5962R9574201TEC
HCTS160DTR
-55 to 125
5962R9574201TXC
HCTS160KTR
-55 to 125
NOTE: Minimum order quantity for -T is 150 units through
distribution, or 450 units direct.
Features
• QML Class T, Per MIL-PRF-38535
• Radiation Performance
- Gamma Dose (γ) 1 x 105 RAD(Si)
- Latch-Up Free Under Any Conditions
- SEP Effective LET No Upsets: >100 MEV-cm2/mg
- Single Event Upset (SEU) Immunity < 2 x 10-9
Errors/Bit-Day (Typ)
• 3 Micron Radiation Hardened SOS CMOS
• Fanout (Over Temperature Range)
- Standard Outputs 10 LSTTL Loads
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii ≤ 5mA at VOL, VOH
Pinouts
HCTS160DTR (SBDIP), CDIP2-T16
TOP VIEW
MR 1
CP 2
P0 3
P1 4
P2 5
P3 6
PE 7
GND 8
16 VCC
15 TC
14 Q0
13 Q1
12 Q2
11 Q3
10 TE
9 SPE
HCTS160KTR (FLATPACK), CDFP4-F16
TOP VIEW
MR
CP
P0
P1
P2
P3
PE
GND
1 16
2 15
3 14
4 13
5 12
6 11
7 10
89
VCC
TC
Q0
Q1
Q2
Q3
TE
SPE
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
Satellite Applications Flow™ (SAF) is a trademark of Intersil Corporation.
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet HCTS160KTR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HCTS160KTR | Radiation Hardened Synchronous Counter | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |