DataSheet26.com

32LD380TA PDF даташит

Спецификация 32LD380TA изготовлена ​​​​«Hitachi» и имеет функцию, называемую «LCD Display SERVICE MANUAL».

Детали детали

Номер произв 32LD380TA
Описание LCD Display SERVICE MANUAL
Производители Hitachi
логотип Hitachi логотип 

36 Pages
scroll

No Preview Available !

32LD380TA Даташит, Описание, Даташиты
SERVICE MANUAL
YK No.024E
32LD380TA
The LCD panel made from AUO is used for this product.
Caution
Be sure to read this manual before servicing. To ensure safety from re, electric shock, injury, harmful
radiation and materials, various measures are provided in this Plasma Monitor.
Be sure to read cautionary items described in the manual before servicing.
These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that described in the operating instructions unless you
are qualied to do so.
Service Warning
1. Since the Panel Module and the front Filter are made of glass, handling the broken Module and Filter
carefully and with caution in order not to receive injury.
2. Replacement work should be started after the Panel Module and the AC/DC Power supply have
become sufciently cool.
3. Special care should be taken when working near the display area in order not to damage its surface.
4. The Panel Module should not be touched with bare hands in order to protect its surface from
blemishes and damage.
5. It is recommended that you use clean soft gloves during the replacement work in order to protect not
only the display area of the Panel Module but also yourself.
Contents
LOCATION OF CONTROL---------------------------- 3 BLOCK DIAGRAM ------------------------------------ 17
REMOTE CONTROL ----------------------------------- 4 PRINTED CIRCUIT BOARDS---------------------- 23
GENERAL SPECIFICATIONS ----------------------- 5 INTERCONNECTION DIAGRAM ----------------- 29
DISASSEMBLY INSTRUCTIONS ----------------- 11 MECHANICAL EXPLODED VIEW ---------------- 30
SERVICE MODE LIST ------------------------------- 13 MECHANICAL REPLACEMENT PARTS LIST------- 33
WHEN REPLACING EEPROM -------------------- 13 ELECTRICAL REPLACEMENT PARTS LIST-------- 35
ELECTRICAL ADJUSTMENTS -------------------- 14
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
LCD Display
January 2006 Digital Media Division









No Preview Available !

32LD380TA Даташит, Описание, Даташиты
CAUTION FOR SAFETY
Please read this page before repair the monitor.
This page explains to following items for keep the safety of set and prevent to accident
during repair work.
We explain by symbol at happen the damage or injury when took wrong repair.
Warning This symbol means "possible to die or heavy damage"
Caution
This symbol means "possible to damage or something will break"
We made the symbol as below, which are kind of following items.
This symbol means "CAUTION"
This symbol means "POSSIBLE to
ELECTRIC SHOCK"
This symbol means "MUST"
This symbol means "DO NOT"
WARNING
Should be follows to instructions.
We indicates to cabinet, chassis and
parts by label, which are special atten-
tion part.
Please follow to note and [Safety
Instructions] of User’s Manual.
Prevent the electric shock.
Please take care during working
because monitor has high voltage part
and power supply part.
Possible to die if you touch to these
place by miss take.
Please disconnect power plug during
overhaul, reassemble or change parts.
You will die or take damage by electric
shock if you touch to live part.
Use recommended components.
Please use to same characteristic com-
ponent, which is same as previous for
your safety and keep reliability espe-
cially marked by in parts list and cir-
cuit diagram.
It is reason of electric shock or fire if
you use non-recommended compo-
nent.
Should be kept same style of wiring or component.
Monitor uses tubes or tapes, which
made by insulator, and some compo-
nents are keep distance from surface of
PWB for safety.
Internal leads kept from hot part or high
voltage part by clamper or styling, so
please return to original condition for
prevent to electric shock or fire.
Should be done safety check after finished.
Every part (removed screws, compo-
nent and wiring) should be returned to
previous condition.
Check around repair position for make
damage by miss take and measure the
insulated impedance by meg-ohm
meter.
Confirm the value of impedance, that
value is more than 4M ohm.
It is reason for electric shock or fire if
that value is less than 4M ohm.
Nobody can check and repair to the code
and combination circuit of HDCP.
Never remove the shield case, which is
assembled to the code and combination
circuit of HDCP.
2









No Preview Available !

32LD380TA Даташит, Описание, Даташиты
Location of controls
You can adjust the angle of
the TV-screen for 2˚ forward
or for 6˚ backward from
1 23 4 5
vertical angle.
Top
Left Side
Approx. 6˚ Approx. 2˚
Front Side
6
7
Anti-Tumble Measure
Securing to a wall or pillar
Using a commercially
available cord, chain, and
clamp, secure the set to a wall
or pillar.
screw
hook
cord or
chain
Wall or Pillar
cord or
chain
clamp
10
8
11
9
Description of Indicators and Controls
1. (SUB-POWER) button: To turn the unit standby mode on and off.
2. INPUT-button: Select input mode for TV/AV/COMPONENT/HDMI/PC.
3. MENU-button: To display the menu-screen.
4. VOLUME /buttons : To adjust the volume. In Menu : Setting.
5. PROGRAM /buttons: Press to change to a higher numbered channel set into memory. Press
to change to a lower numbered channel set into memory. In Menu : Setting. In Standby : Turning
on the unit.
6. HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack.
7. AV3-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector,
use an S-video cable instead of a standard yellow video cable (You still must connect the standard
red and white audio cables for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
8. Main Power Switch: To turn the unit on or off completely.
9. Loudspeakers
10. Remote sensor
11. STANDBY/ON mode indicator: It lights up in red at STANDBY, and in green at POWER ON.
3










Скачать PDF:

[ 32LD380TA.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
32LD380TALCD Display SERVICE MANUALHitachi
Hitachi
32LD380TATV SERVICE MANUALHitachi
Hitachi

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск